Rotork Process Control Actuators

Rotork Process Controls manufactures electric actuators for continuous modulating control in the process industries. The products fall into two main groups:
Control valve actuators for control of flow or pressure in a process and motion control in other applications.

CMA – These modulating actuators deliver a series of sizes suitable for linear, quarter-turn and rotary control valve and pump applications requiring exact position control and restricted continuous modulation.
CVA – Uses advanced motion control technology to provide exceptional positioning and dynamic performance. Super-capacitors used for fail to position capability. Actuator calibration, configuration and interrogation are performed non-intrusively using wireless Bluetooth communications. Linear and quarter turn outputs available.
GPSA – A smart actuator that includes its own PI process controller. Linear and multi-turn outputs available.
1000/1600 series – A full range of compact, robust and cost effective process control valve actuators. Linear and multi-turn outputs available. Versatile enough to be used in a pump stroke control and other applications. MV-1000/VA-1000, MV-1500, SM-1000, SM-1100/SM-1500/SM-1600

Heavy duty damper drives for air and gas flow control in boilers and heaters.

LA2000 – A range of linear output drives with a variety of travel lengths to provides burner shroud and damper automation. These are compact and cost effective solutions to damper automation. LA-2400 LA-2500
SM-1700/SM-5000 ranges provide proven reliability for dampers requiring rotary drives regardless of damper size.
SM-6000 is the most accurate damper drive available, providing fast reaction time and high precision for unparalleled boiler air and flue gas control.

Product Compare (0)

Rotork Process Control Actuators CML Linear

Can be powered by single-phase or direct current supplies Linear drive action Permanently lubricated and maintenance free drive train Capable of being mounted in any orientation Accurate and repeatable position control 4 to 20 mA loop powered, feedback signal Digital communication options including HART®, Foundation FieldbusTM, Profibus®, Pakscan, RIRO and Modbus® available Field selectable adjustments for: Deadband Zero and span Command signal type Standard or reverse acting Manual-auto operation Output shaft position on loss of signal Wide standard ambient temperature range -22 to 158 °F (-30 to 70 ºC) Optional high or low temperature trim Manual override standard Electronic thrust/torque limiting Two standard adjustable position switches

Rotork Process Control Actuators CMQ Quarter Turn series

Can be powered by single-phase or direct current supplies Quarter-turn drive action Permanently lubricated and maintenance free drive train Capable of being mounted in any orientation Accurate and repeatable position control 4 to 20 mA loop powered, feedback signal Digital communication options including HART®, Foundation FieldbusTM, Profibus®, Pakscan, RIRO and Modbus® available Field selectable adjustments for: Deadband Zero and span Command signal type Standard or reverse acting Manual-auto operation Output shaft position on loss of signal Wide standard ambient temperature range -22 to 158 °F (-30 to 70 ºC) Optional high or low temperature trim Manual override standard Electronic thrust/torque limiting Two standard adjustable position switches

Rotork Process Control Actuators CMR Rotary series

Can be powered by single-phase or direct current supplies. Rotary drive action. Permanently lubricated and maintenance free drive train. Capable of being mounted in any orientation. Accurate and repeatable position control. 4 to 20 mA loop powered, feedback signal. Digital communication options including HART®, Foundation FieldbusTM, Profibus®, Pakscan, RIRO and Modbus® available. Field selectable adjustments for: Deadband. Zero and span. Command signal type. Standard or reverse acting. Manual-auto operation. Output shaft position on loss of signal. Wide standard ambient temperature range -22 to 158 °F (-30 to 70 ºC). Optional high or low temperature trim. Manual override standard. Electronic thrust/torque limiting. Two standard adjustable position switches.

Rotork Process Control Actuators CVL Linear series

The Rotork CVL linear, electric process control actuator, offers a highly accurate and responsive method of automating control valves, without the complexity and cost of a pneumatic supply. With an increased focus on production costs and efficiency, accurate control of product through the pipeline is paramount. With resolution figures better than 0.1% and the ability to eliminate position overshoot, the Rotork CVL helps to maximise product quality and plant capacity. The CVL delivers a range of sizes suitable for almost all linear control valve applications requiring highly accurate positioning. It offers end users high standards in performance, build quality and overall value. Features Single-Phase or Direct Current power supplies Linear drive action On-board datalogger included as standard Bluetooth compatible for local setup / control and diagnostics Accurate and repeatable positional control using 4-20 mA signal Digital communication options including HART, Profibus and Foundation Fieldbus Direct torque / thrust measurement for protection and monitoring Scalable control input characterisa

Rotork Process Control Actuators CVQ Quarter Turn series

The Rotork CVQ quarter-turn, electric process control actuator, offers a highly accurate and responsive method of automating control valves, without the complexity and cost of a pneumatic supply. With an increased focus on production costs and efficiency, accurate control of product through the pipeline is paramount. With resolution figures better than 0.1% and the ability to eliminate position overshoot, the Rotork CVQ helps to maximise product quality and plant capacity. The CVQ delivers a range of sizes suitable for almost all quarter-turn control valve applications requiring highly accurate positioning. It offers end users high standards in performance, build quality and overall value. Features Single-Phase or Direct Current power supplies Quarter-turn drive action On-board datalogger included as standard Bluetooth compatible for local setup / control and diagnostics Accurate and repeatable positional control using 4-20 mA signal Digital communication options including HART, Profibus and Foundation Fieldbus Direct torque / thrust measurement for protection and monitoring Scalable control input

Rotork Process Control Actuators GPSA range

The GPSA range comprises linear and rotary models with integrated actuation control all in one, compact package. A two line 16 character display and non-intrusive rotary switches comprise the actuator's HMI (Human Machine Interface). This provides a simple user access for viewing and modifying parameters and data feedback. The GPSA is easy to install requiring no additional control panels or cabling, all in the safety of an explosion-proof controller. Linear: Thrust range up to 890 N (200lbf); Stroke distance up to 35mm (1.375") Rotary: Rotation 90° to 20 turns; torque range up to 350 lbf-in (40Nm) Continuous unrestricted modulating duty HART, Profibus and Foundation Fieldbus available Temperature range from -20ºC to 65ºC (-4ºF to 150ºF) Automatic thrust limiting available Self locking drive system to hold in last position and prevent backdriving up to thrust rating Manual override as standard Integral PI (Proportional & Integral) control Adjustable speed Outp

Rotork Process Control Actuators Jordan Legacy Products

LA Series Actuators LA-1500 series Linear actuators LA-2300 series Electric Linear actuators LA-2800 series Electric Linear actuators LA-2900 series Linear actuators LA-5100 series Linear actuators LA-5200 series Linear actuators LA-5300 series Electric Linear actuators MV Series Actuators MV-1005 electronic actuator MV-1100 series linear electric valve actuator MV-1100/AD-8110 series electric sliding stem valve operators SM Series Actuators SM-1015 digital actuator SM-1020 process variable actuator SM-1020-0144 electronic actuator for HART communication SM-1020-0107 electronic actuator for HART communication Spanish SM-1020-0107 electronic digital actuators SM-1100 series Rotary actuator SM-1500 & SM-1600 Series Instruction Manual SM/LA-3300 series failsafe actuators SM/LA-3330 series failsafe actuators with built in AD-8200 amplifiers QT Series Actuators QT series on/off 90deg electric valve actuator QT series on/off 90deg electric valve actuator TA Series Actuators TA-1200 series throttle actuator LA Series Actuators LA-1000 series linear actuators LA-1100/LA-1500 series linear actuators LA-5000 series linear actuators SM Series A

Rotork Process Control Actuators LA-2400

Thrusts from 150 to 1,500 lbf. (667 to 6,672 N) Stroke distance from 6 to 24 inches (152 to 610 mm) Modulating Duty: 2,000 starts per hour Manual override standard HART available Automatic thrust limiting Anti-condensation heater and thermostat Self-locking drive system to hold in last position and prevent backdriving up to thrust rating AC input power (single and three phase) or DC input power versions Temperature range from -40° F to 150° F (-40° C to 65° C)

Rotork Process Control Actuators LA-2500

Thrusts from 800 to 1,600 lbf. (3,558 to 7,117 N) Stroke distance from 6 to 24 inches (152 to 610 mm) Modulating Duty: 2,000 starts per hour (indoor/outdoor) Manual override standard HART available Automatic thrust limiting Anti-condensation heater and thermostat Self-locking drive system to hold in last position and prevent backdriving up to thrust rating AC input power (single and three phase) Temperature range from -40° F to 150° F (-40° C to 65° C)

Rotork Process Control Actuators MV-1000/VA-1000

MV-1000: Up to 200 lbf. (890 N) thrust VA-1000: 220 to 900 lbf. (979 to 4003 N) thrust MV-1000: Up to 1.375 inches (35mm) linear travel VA-1000: Up to 1.5 inches (38.1mm) linear travel Continuous unrestricted modulating duty Manual override standard Automatic thrust limiting Self-locking drive system to hold in last position and prevent backdriving up to thrust rating AC input power (single phase) or DC input power versions Temperature range from -40° F to 150° F (-40° C to 65° C)

Rotork Process Control Actuators SM-1000

Torques up to 350 in. lb. (40 Nm) Rotation: 10 degrees to 20 turns Continuous unrestricted modulating duty Manual override Automatic torque limiting Self-locking drive system to hold in last position and prevent backdriving up to torque rating AC input power (single phase) or DC input power versions Temperature range from -40° F to 150° F (-40° C to 65° C)

Rotork Process Control Actuators SM-1100/SM-1500/SM-1600

Rotork Process Controls designs and manufactures high quality, durable actuators designed for trouble-free performance under the most demanding conditions. The SM-1100, SM-1500 and SM-1600 Series are multiturn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating positioning control. They can be applied to valves, metering pumps, hydraulic and pneumatic pressure regulators, dampers, and many more industrial / process control applications where reliable remote positioning control is required. The gearing is totally enclosed, permanently lubricated. The actuator housing may be NEMA 4 Watertight or Explosion proof rated for Class I, Division 1, Groups C, D and dust ignition proof Class II, Division 1, Groups E, F, G Features Torques from 3.5 to 1,000 in.lb. (6 to 131 Nm) Rotation 40 degrees to 324 turns Modulating duty: 2,000 starts per hour Manual override option Watertight IP-65 and explosion proof enclosures AC input power (single-phase) or DC input power versions Temperature range from -40 to 150 °F (-40 to 65 °C) FM and CSA certified

Rotork Process Control Actuators SM-1700/SM-5000

SM-1700 Torques from 50 to 200 ft.lb. (67 to 271 Nm) 90 to 120 degrees rotation Modulating Duty: 2,000 starts per hour Manual override standard Automatic torque limiting Self-locking drive system to hold in last position and prevent backdriving up to thrust rating AC input power (single and three phase) or DC input power versions Temperature range from -40° F to 185° F (-40° C to 85° C) SM-5000 Torques from150 to 12,500 ft. lb.(203 to 16950 Nm) 33 to 90 degrees rotation Modulating Duty: 2,000 starts per hour Manual override standard Automatic torque limiting Self-locking drive system to hold in last position and prevent backdriving up to thrust rating AC input power (single and three phase) Temperature range from -40° F to 185° F (-40° C to 85° C)

Rotork Process Control Actuators SM-6000

Torques from 370 to 26,000 ft.lb.(502 to 35,256 Nm) 90 to 313 degrees rotation Continuous unrestricted modulating duty Manual override standard HART, Profibus & Foundation Fieldbus available Automatic torque limiting Self-locking drive system to hold in last position and prevent backdriving up to 125% of torque rating AC input power (single and three phase) Temperature range from -40° F to 185° F (-40° C to 85° C)

Showing 1 to 14 of 14 (1 Pages)