Non standard cylinders

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M1N032A0025 Cylinders Series 42 Round cylinders single-acting 25 32 42M1N032A0050 Cylinders Series 42 Round cylinders single-acting 50 32 42M1N032A0075 Cylinders Series 42 Round cylinders single-acting

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M1N040A0025 Cylinders Series 42 Round cylinders single-acting 25 40 42M1N040A0050 Cylinders Series 42 Round cylinders single-acting 50 40 42M1N040A0075 Cylinders Series 42 Round cylinders single-acting

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M1N050A0025 Cylinders Series 42 Round cylinders single-acting 25 50 42M1N050A0050 Cylinders Series 42 Round cylinders single-acting 50 50 42M1N050A0075 Cylinders Series 42 Round cylinders single-acting

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M1N063A0025 Cylinders Series 42 Round cylinders single-acting 25 63 42M1N063A0050 Cylinders Series 42 Round cylinders single-acting 50 63 42M1N063A0075 Cylinders Series 42 Round cylinders single-acting

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M6N032A0300 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 300 32 42M6N032A0320 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 320 32 42M6N032A0400 Cylin

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M6N063A0025 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 25 63 42M6N063A0050 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 50 63 42M6N063A0075 Cylinde

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M6N040A0025 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 25 40 42M6N040A0050 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 50 40 42M6N040A0075 Cylinde

Type of construction compact - flanged Operation single-acting or double-acting Materials end-blocks = AL tube = stainless steel AISI 304 rod = stainless steel AISI 420B other parts (see coding) Type of mounting front flange, rear flange, feet, front and rear trunnion, threaded pins Strokes min - max 10 - 1000 mm Operating temperature 0 ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting); 2 ÷ 10 bar (single-acting) Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 42M6N050A0025 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 25 50 42M6N050A0050 Cylinders Series 42 - through-rod Round cylinders double-acting, through-rod 50 50 42M6N050A0075 Cylinde

Type of construction compact, non magnetic Operation single-acting Materials body = brass seals = NBR other = stainless steel Operating pressure P. min 2,5 bar - P. max 8 bar Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Bore ø 6, 10, 16 Stroke see table Mounting method by means of threaded body Code Title Type Operation Stroke (mm) Diameter (mm) 14N1A06A05 Compact minicylinders with non threaded piston rod Mod. 14N1A Compact minicylinders single-acting 5 6 14N1A06A10 Compact minicylinders with non threaded piston rod Mod. 14N1A Compact minicylinders single-acting 10 6 14N1A06A15 Compact minicylinders with non threaded piston rod Mod. 14N1A Compact minicylinders single-acting 15 6 14N1A10A05

Type of construction compact, non magnetic Operation single-acting Materials body = brass seals = NBR other = stainless steel Operating pressure P. min 2,5 bar - P. max 8 bar Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Bore ø 6, 10, 16 Stroke see table Mounting method by means of threaded body Code Title Type Operation Stroke (mm) Diameter (mm) 14N1A06B05 Compact minicylinders with threaded piston rod Mod. 14N1A Compact minicylinders single-acting 5 6 14N1A06B10 Compact minicylinders with threaded piston rod Mod. 14N1A Compact minicylinders single-acting 10 6 14N1A06B15 Compact minicylinders with threaded piston rod Mod. 14N1A Compact minicylinders single-acting 15 6 14N1A10B05 Compact min

Type of construction compact, non magnetic Operation single-acting Materials body = brass seals = NBR other = stainless steel Operating pressure P. min 2,5 bar - P. max 8 bar Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Bore ø 6, 10, 16 Stroke see table Mounting method by means of threaded body Code Title Type Operation Stroke (mm) Diameter (mm) 14N1M06A05 Compact minicylinders with non threaded piston rod Mod. 14N1M Compact minicylinders single-acting 5 6 14N1M06A10 Compact minicylinders with non threaded piston rod Mod. 14N1M Compact minicylinders single-acting 10 6 14N1M06A15 Compact minicylinders with non threaded piston rod Mod. 14N1M Compact minicylinders single-acting 15 6 14N1M10A05

Type of construction compact, non magnetic Operation single-acting Materials body = brass seals = NBR other = stainless steel Operating pressure P. min 2,5 bar - P. max 8 bar Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Bore ø 6, 10, 16 Stroke see table Mounting method by means of threaded body Code Title Type Operation Stroke (mm) Diameter (mm) 14N1M06B05 Compact minicylinders with threaded piston rod Mod. 14N1M Compact minicylinders single-acting 5 6 14N1M06B10 Compact minicylinders with threaded piston rod Mod. 14N1M Compact minicylinders single-acting 10 6 14N1M06B15 Compact minicylinders with threaded piston rod Mod. 14N1M Compact minicylinders single-acting 15 6 14N1M10B05 Compact min

Type of construction flanged Operation double acting Materials end-blocks = AL - rod and tube = stainless steel - piston = AL piston and rod seals = PU Mounting feet - trunnion - steel bar - pins Strokes min-max all diameters 10 - 1000 mm Bores ø 20, 25, 32, 40, 50, 63 Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 27M2A40A0025 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 25 40 27M2A40A0040 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 40 40 27M2A40A0050 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 50 40

Type of construction flanged Operation double acting Materials end-blocks = AL - rod and tube = stainless steel - piston = AL piston and rod seals = PU Mounting feet - trunnion - steel bar - pins Strokes min-max all diameters 10 - 1000 mm Bores ø 20, 25, 32, 40, 50, 63 Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 27M2A40A0025 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 25 40 27M2A40A0040 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 40 40 27M2A40A0050 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 50 40

Type of construction flanged Operation double acting Materials end-blocks = AL - rod and tube = stainless steel - piston = AL piston and rod seals = PU Mounting feet - trunnion - steel bar - pins Strokes min-max all diameters 10 - 1000 mm Bores ø 20, 25, 32, 40, 50, 63 Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 27M2A20A0025 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 25 20 27M2A20A0040 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 40 20 27M2A20A0050 Cylinders Series 27 (Ø 20, 25, 32, 40) Round cylinders double-acting 50 20