Camozzi Stainless steel cylinders

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97F1A032A0025 Cylinders Series 97, Mod. F Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97A1A050A0025 Cylinders Series 97, Mod. A Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97A1A032A0025 Cylinders Series 97, Mod. A Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97A1A040A0025 Cylinders Series 97, Mod. A Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97A1A063A0025 Cylinders Series 97, Mod. A Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97F1A050A0025 Cylinders Series 97, Mod. F Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97F2V063A0250 Cylinders Series 97, Mod. F Stainless steel round cylinders TRUE double-acting, front and rear cushio

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97F1A040A0025 Cylinders Series 97, Mod. F Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Me Stroke (mm) Diameter (mm) Magnetic Version Rod seal 97M1A050A0025 Cylinders Series 97, Mod. M Stainless steel round cylinders TRUE single-acting, front spring 25 50

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Me Stroke (mm) Diameter (mm) Magnetic Version Rod seal 97M1A050A0025 Cylinders Series 97, Mod. M Stainless steel round cylinders TRUE single-acting, front spring 25 50

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Me Stroke (mm) Diameter (mm) Magnetic Version Rod seal 97M1A040A0025 Cylinders Series 97, Mod. M Stainless steel round cylinders TRUE single-acting, front spring 25 40

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Me Stroke (mm) Diameter (mm) Magnetic Version Rod seal 97M1A032A0025 Cylinders Series 97, Mod. M Stainless steel round cylinders TRUE single-acting, front spring 25 32

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97S1A063A0025 Cylinders Series 97, Mod. S Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97S1A032A0025 Cylinders Series 97, Mod. S Stainless steel round cylinders TRUE single-acting, front spring 25

Type of construction the end blocks are screwed to the tube with an intermediate Teflon ring Operation single-acting and double-acting Materials end blocks, tube, rod in stainless steel AISI 304 rod seals in PU, piston seals in NBR plastic guiding element, NSF H1-certified lubricant Type of mounting threaded front and rear locking ring pins on front cap ends rear male hinge articulated rear male hinge rear female hinge Stroke min-max 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Magnetic Operation Stroke (mm) Diameter (mm) Version Rod seal 97S1A040A0025 Cylinders Series 97, Mod. S Stainless steel round cylinders TRUE single-acting, front spring 25