Koganei Air Cylinder

ï½¥Long stroke and high-speed operation with half the installation space. ï½¥Slit-type eliminates the need for detents or guides; and the load can be applied directly onto the carriage. ï½¥Simplifies structure of machine and equipment and also greatly reduces design man-hours. Bore mm Stroke mm Port 10 100-500 M5  The smallest slit barrel type with seal band in the series Offers directly applying loads, non-rotating, and long strokes in hard-to-reach places not covered under conventional small-bore cylinders. Compact sensor switch strongly supports the space savings of the ultra-slender body. Specifications Bore mm [in.] 10 [0.394] Item Double acting type Operation type Air Media 0.20.7 [29102] Operating pressure rangeMPa [psi.] 1.03 [149] Proof pressureMPa [psi.] 060 [32140] Operating temperature range°,C [°, Note 100500 [3.919.7] Operating speed rangemm/s [in./sec.] Cushion Rubber bumper Lubrication Not required Maximum stroke mm [in.] 2000 [78.74]0.197 1000 [39.37]5 [      ] or less0.0390 Stroke tolerance mm [in.]0.236 1001 20006 [      ]

ï½¥Long stroke and high-speed operation with half the installation space. ï½¥Slit-type eliminates the need for detents or guides; and the load can be applied directly onto the carriage. ï½¥Simplifies structure of machine and equipment and also greatly reduces design man-hours. Bore mm Stroke mm Port 63-80 500-2000 Rc3/8.Rc1/2  SLIT TYPE RODLESS63, 80 FeaturesA long stroke of up to 5000mm [196.8in.] can be manufactured. It can also be used to make driving equipment, which could not be done by air cylinders in the past.  The magnet for the sensor switch is standard equipment.  By installing a sensor switch, the piston position can be easily detected, and the space for the limit switch mounting and design man-hours can be greatly reduced.  Upside down installation mountings have been put into a series. By installing the piston yoke facing downwards, the seal band is protected, thereby increasing its durability. Specifications Bore size63 [2.480in.]80 [3.150in.] Air Media Double acting type Operation type 0.10.8 [15116] Operating pressure rangeMPa [psi.] 1.2 [174] Proof pressureMPa [psi.] Oper

Compact design maximally reduces total length and height; can halve the installation space as well as to half of the installation space. ï½¥Installation of sensor switch is feasible for factory automation-oriented advanced design. ï½¥Multiple port locations enables one side piping or versatile piping direction. Bore mm Stroke mm Port 16-50 100-2000 M5.Rc1/8 Rc1/4.Rc3/8 Slit Type Rodless Cylinders ORCA, ORGA A bend-resistant and wear-resistant stainless chrome steel seal band is used, which enables high performance and long life. Specifications Bore size 16 [0.630] 20 [0.787]25 [0.984]32 [1.260]40 [1.575]50 [1.969] mm [in.] Item Air Media Double acting type Operation type 0.10.8 [15116] Operating pressure rangeMPa [psi.] 1.2 [174] Proof pressureMPa [psi.] 060 [32140] Operating temperature range °,C [°, Note Note Operating speed range mm/s [in./sec.] 1001500 [3.959.1] 1003000 [3.9118.1] Variable cushion Cushioning stroke mm [in.] Lubrication Not required0.0595 1000 [39.37] or less [      ]0.0390.50.079 10013000 Stroke tolerancemm [in.] [     

ï½¥Rich series lineup and mounting types conforming to ISO standards allow the series to become the standard of tie rod type medium cylinders. ï½¥Variations include; non-rotating; with brake e.t.c. and bore ranges from 32mm to 125mm. ï½¥New cushion needles and floating packing make the series even more easier to use. Standard Cylinders Non-rotating Cylinders Double Rod Cylinders Non-rotating Double Rod Cylinders Tandem Cylinders Dual Stroke Cylinders Stroke Adjusting Cylinders Low Hydraulic Cylinders Valpack Cylinders End Keep Cylinders Bore mm Stroke mm Port 32-100 50-1000 Rc1/8;Rc1/4; Rc3/8;Rc1/2  The DYNA cylinders, compact and lightweight mid-sized actuators compatible with ISO standards, offer a wide range of configurations and mounting types to meet various application requirements in a flexible manner. Moreover, the use of a new type of cushion needle and floating seal have made these products user-friendlier. Standard cylinders, Non-rotating cylinders, Double rod cylinders, Non-rotating double rod cylinders, Tandem cylinders, Dual stroke cylinders, Push side stroke adjusting cylinders, Pull side

Easy-to-handle miniature 4mm sensor switch can be installed. ･Non-rotating type is also available; which can respond to various needs with high non-rotating accuracy. ･Square & compact body and mounting brackets make various installations possible. Dimensions of Non-rotating Double Acting Type Dimensions of Non-rotating Single Acting Push Type Dimensions of Non-rotating Single Acting Pull Type Dimensions of Non-rotating Double Acting Dimensions of Double Acting Type Dimensions of Single Acting Push Type Dimensions of Single Acting Pull Type Dimensions of Double Acting Double Rod Type Double Rod Type Specifications Bore size mm [in.] 6 [0.236] 10 [0.394]16 [0.630] Item Media Air Double acting 0.150.7 0.10.7 0.080.7 [22102] [15102] [12102] type Single acting 0.20.7 0.150.7 0.150.7 Operating [29102] [22102] [22102] push type pressure range MPa Single acting 0.30.7 0.20.7 0.20.7 [psi.] [44102] [29102] [29102] pull type Double acting 0.20.7 0.150.7 0.10.7 double rod type [29102] [22102] [15102] 1.03 [149] Proof pressureMPa [psi.] 060 [32140] Operating temperature range °,C [°, 50500 [2.019.7] Operating speed rangemm/s [in./sec.] Rub

Square body and six-surface mounting facilitates compact, direct mounting. ï½¥Mounts a linear guide to save space and pursue non-rotating accuracy. ï½¥Embedded sensor switch does not protrude from body.. ï½¥Use in embedded sensor mounting grooves on two surfaces of the body. Bore mm Stroke mm Port 6-20 5-30 M5x0.8 Directly mountable without mounting bracket, realizing clean lines by embedded sensor switch. Standard cylinders (Double acting type, Single acting push type, and Single acting pull type)  Model YMDA (Double acting type) YMSA (Single acting push type) YMTA (Single acting pull type) YMDAL (Non-rotating double acting type) Model YMDA6 YMDAS6 YMDA10 YMDAS10 YMDA16 YMDAS16 YMDA20 YMDAS20 Model YMTA6 YMTAS6 YMTA10 YMTAS10 YMTA16 YMTAS16 YMTA20 YMTAS20 YMDAL6 YMDALS6 YMDAL10 YMDALS10 YMDAL16 YMDALS16 YMDAL20 YMDALS20 YMDAGS6 YMDAGS10 YMDAGS16 YMDAGS20 YMDAGS6-L -L YMDAGS10 -L YMDAGS16 -L YMDAGS20

New variations of "Stroke-adjustable cylinder" and "Low-friction cylinder" are added to the Series in May, 2008. ï½¥Short and compact body achieves total space saving. ï½¥Responds to various needs with cylinder bores from 6mm to 100mm and versatile functions. ï½¥A square rod with non-rotating function can provide a highly efficient design for mechanical devices. Bore mm Stroke mm Port 6-100 5-300 M3;M5;Rc1/8; Rc1/4;Rc3/8 Standard Cylinders, Non-rotating Cylinders, Square Rod Cylindersp,Dual Stroke Cylinders,Double Rod Cylinders, Tandem Cylinders, Lateral Load Resistant Cylinders, Long Stroke Cylinders, End Keep Cylinders.  

ï½¥Short body and versatile installation result in a simplified mechanical device. ï½¥Compact and lightweight single acting type achieves remarkable space-saving effects. ï½¥Central locator and wrench flats on the body allow solid and highly accurate installation. Bore mm Stroke mm Port 6-16 5-30 M5x0.8  The space-saving KNOCK CYLINDERS The total length has been shortened as much as possible. The compact, lightweight Knock Cylinder demonstrates space-saving effectiveness in various mounting configurations.Double Acting TypeFinely tuned configurations capable of dealing even with non-ion specification offer compact, lightweight features.4 types and 5 classes of mounting types allow for a large variety of mounting configurations.Capable of mounting 4mm [0.157in.] sensor switches for excellent performance in a compact size. Single Acting Push Type A centering location on the body improves mounting precision.Wrench flats built into the body provide secure mounting.Drawing presentation for positioning not required. Specifications Bore size mm [in.] 6 [0.236] 10 [0.394]16 [0.630] Item Double acting type Operation t

Complies with ISO and JIS standards. ï½¥Cylinders bores 125mm to 250mm (up to 160mm for sensor cylinder). ï½¥Strokes up to 2000mm supported (Depends on model). ï½¥Compatible with Class 2 pressure vessels. Bore mm Stroke mm Port 125-250 1-1000 Rc1/2;Rc3/4 Rc.1  KSD Cylinder ! JIS standards cylinders with high power! Strong  (Excluding 140 and 180)lll ddddii 140 ddddd 180)Installation dimensions comply with JIS standards [JIS B 8368] A wide selection of variations!Cylinder bores   (Up to 160 for sensor cylinder) 125 to  250Strokes up to  mm supported (Depends on model) 2000 Connection portCompatible with Class 2 pressure vessels125Rc1/2140, 160, 180, 200Rc3/4250Rc1 Standard CylindersAluminum tube (125 to 160)Steel tube (125 to 250) Double-rod CylindersAluminum tube (125 to 160)Steel tube (125 to 250) Tandem CylindersAluminum tube (125 to 160)Steel tube (125 to 250) Dual Stroke CylindersAluminum tube (125 to 160)Steel tube (125 to 250) Push Side Stroke Adjustment CylindersAluminum tube (125 to 160)Steel tube (125 to 250) Pull Side Stroke Adjustment CylindersAluminum tube (125 to 160)S

Positioning detection is possible due to installation of sensor switches, responding to wide variety of requirements due to general purpose products. Mini Bit Cylinder MBDAS Series Bore mm Stroke mm Port 4.5-10 4-20 M3x0.5 ï½¥Total length: up to 41percent reduction. volume: up to 67percent reduction (compared with Koganei multi-mount cylinders).   Smaller than the current compact Multi Mount Cylinders range offering space-saving mounting. Total length: up to 41%reductionVolume: up to 67%reduction Above data compares the Mini Bit with our standard Multi Mount cylinder without magn Outer dimensions (without magnet) mm [in.] ( ) ( ) ( ) Bore size A A° B B° C C° 4.5 [0.177] 6 [0.236] ((R)C 15 [0.591] ((R)C 16 [0.630] ((R)C 6 [0.236] 8 [0.315] (12 [0.472]) 17 [

Series ranges from 2.5mm to 16mm; conforming to the non-ion standard for all models. ï½¥Wide variation of 15 models including made-to-order products. Bore mm Stroke mm Port 2.5-16 5-200 M3;M5; with fitting    The Pen Cylinder°Os compactness and easy handling make     production lines in a broad range of industries. A new release with even lighter weight and more Order Codes Number of sensor switches PB ADAE 1030 1      With 1 sensor switch 2      With 2 sensor switches 3      With 3 sensor switches Bore size Stroke Lead wire length A      1000mm [39in.] B     3000mm [118in.] Cylinder specification Blank Standard cylinder Rod end accessory (Included at shipping) Sensor switch S Cylinder with magnet Blank No rod end accessory Blank No sensor switch I With I type knuckle ZC253 3-lead wire, solid state type Y With Y type knuckle (with pin) ZC230 2-lead wire, solid state typeAs for the cylinder joints and the cylinder rod ZC201 2-lead wire, ree

Achieves complete non-lubrication for all cylinders. ï½¥Series lineup equals to the one of medium cylinder; such as standard type; heavy-duty rod and double rod. Standard Cylinders Heavy Duty Rod Cylinders Double Rod Cylinders Tandem Cylinders Dual Stroke Cylinders Stroke Adjusting Cylinders Low Hydraulic Cylinders The power of the SD cylinder as the basic large cylinders has been joined with advanced functionality.All bore sizes (125 [4.921in.]200 [7.874in.])Cylinder with magnet is standard. are non-lubrication types. Cylinders with magnet type are now standard for bore sizes 125 [4.921in.] Although lubrication was previously required, the installation of160 [6.299in.], making them easier to use. grease pockets made it possible to make them non-lubrication types. Standard cylinders, Heavy duty rod cylinders, Double rod cylinders, Tandem cylinders, Dual stroke cylinders, Push side stroke adjusting cylinders, Pull side stroke adjusting cylinders, Low hydraulic cylinders,Cylinders with magnets Bore mm Stroke mm Port 125-200 0-1000 Rc1/2;Rc3/4

Various variations respond flexibly to all kinds of needs. ï½¥Becomes standard for small and medium cylinders with its high quality and high reliability in design using stainless steel tube. ï½¥Can operate at high speed of 700mm/sec and 500mm/sec for 50mm and 63mm respectively. Bore mm Stroke mm Port 20-63 15-500 Rc1/8;Rc1/4  Specifications Bore size mm [in.] 32, 40 [1.260, 1.575] 50, 63 [1.969, 2.480] 20, 25 [0.787, 0.984] Item Operation type Double acting type Media Air Basic type, Foot type, Flange type, Pivot type, Head trunnion type, Rod trunnion type Mounting type Basic type, Foot type, Flange type, Pivot type 0.040.9 [6131] Standard cylinder Operating pressure range 0.040.7 MPa [psi.] [6102] Cylinder with variable cushion 0.10.9 [15131] 0.150.9 [22131] Proof pressureMPa [psi.] 1.03 [149] 1.32 [191] Operating temperature range°,C [°, 070 [32158] Operating speed rangemm/s [in./sec.] 30500 [1.219.7] 30800 [1.231.5] (With variable cushion is 301000 [1.239.4]) Standard cylinder Fixed type (Rubber bumper) Variable type as standard Cushion (Stroke 12mm [0.472in.]) Cylinder with variable cush

ï½¥Innovative air cylinder uses dual tube structure. ï½¥Piping ports concentrated onto one surface to eliminate dead space. ï½¥Compact & highly rigid mount allows space-saving; small mounting pitch and highly accurate installation. Bore mm Stroke mm Port 16-40 15-300 M5;Rc1/8 TWINPORT CYLINDERS Head Side Piping, Rod Side Piping Specifications Bore Size and Stroke Bore size  mm [in.] 16 [0.630]20 [0.787]25 [0.984]32 [1.260]40 [1.575] Item Bore Maximum Maximum Standard strokes size available stroke stroke Operation type Double acting type 16 Media Air 20 Basic type, Single foot type, Double foot type, Mounting type 25 Flange type, Side mount 32 Operating pressure rangeMPa [psi.] 0.10.7 [15102] 40 1.03 [149] Proof pressureMPa [psi.] + 060 [32140] Operating temperature range °,C [°, [          ] Remark:Stroke tolerance + 50500 [2.019.7] Operating speed rangemm/s [in./sec.] Fixed type (Rubber bumper) Cushion Not required Lubrication Connection Port Location and Mounting Type Port size/ Connection port location Mounting type Basic type, Single