Parker RETIRED CYLINDERS

Magnetostrictive, Non Contact Sensing, Feedback Digital or Analog Output Position accuracy to .0002 (Electronics Interface Dependant) Construction: Extruded, anodized aluminum body, heads and caps 2 - 4 bore. Anodized aluminum barrel, heads and caps - tie rod design for 5 8 bore sizes. Bore Sizes: 2, 2-1/2, 3-1/4, 4, 5,6, and 8 Standards: NFPA Interchangeable (ANSI/NFPA T.3.6.7R2-1996) for 2 8 bore sizes. Strokes: Available in any practical stroke length Piston Rod Diameters: 5/8 1 Operating Medium: Pneumatic, 250-PSI. Optional 250-PSI Hydraulic Service (non-shock, and non-cushioned). Standard Fluid: Filtered Air Piston Rod Ends: 3 standard, specials to order Mounting styles: 11 standard Standard Operating Temperature: -10F to + 165F NPTF Ports Standard, Others Available Upon Request NPTF Ports Standard, Others Available Upon Request Additional Options: --- Adjustable Cushions head end, cap end, or both ends (Captive Design) --- Bumpers --- Bumper Seals Design Features: --- Corrosion Resistant Aluminum Construction Throughout --- Removable Rod Gland Assembly --- Self-Compensating Rod Wiper and Seal --- Rated for Non Lube Service

Construction: Extruded, anodized aluminum body, heads and caps 1⅛” - 4” bore. Bore Sizes: 1⅛”, 1½”, 2”, 2½”, 3¼”, and 4” Strokes: Available in any practical stroke length Piston Rod Diameters: 5/16” – ⅝“ Operating Medium: Pneumatic, 250-PSI. Optional 250 PSI Hydraulic Service (non-shock, and non-cushioned). Standard Fluid: Filtered Air Piston Rod Ends: 2 style tooling plates standard, specials to order Single or double piston rod ends available, Double piston rod end can be single or triple rod design. Mounting styles: 11 standard (10 NFPA Interchangeable mountings for 1½” – 4” bore sizes) Standard Operating Temperature: -10°F to + 165°F High Temperature Option: -10°F to + 250°F Ports: NPTF ports are standard, others available Additional Options: --- Adjustable Cushions head end, cap end, or both ends (Captive Design) --- Magnetic Piston Sensing --- Magneto Strictive Linear Position Feedback Design Features: --- Non-Rotating Piston and Rod Assembly --- Corrosion Resistant Aluminum Construction Throughout --- Removable Bearing Assembly --- Self Compensating Rod Wiper and Seal --- Rated for Non Lube Service 

Description: The Precision Slide Table is designed for moving loads quickly and accurately. The double bore design provides maximum force output while limiting overall size. Bearings The Precision Slide Table has 4 sets of stainless steel ball bearings guided on 2 rails. This device provides outstanding accuracy and very precise guidance. Bumpers/Shock Absorbers Bumpers or self-compensating shock absorbers provide energy absorption and controlled deceleration. Stroke adjustment Stroke adjustment is available for precise end of stroke positioning. In addition the front stop can be moved in increments, providing extra adjustment. Mounting Mounting kits provide the possibility to mount the Precision Slide Table on 4 sides and in conjunction with other Parker products.

The P5T2 Series features short-stroke, heavy-duty performance in a smaller footprint than conventional thrusters that use external cylinders. Parker's innovative design of the P5T2 addresses requirements in the packaging, conveyor and assembly markets where available space is limited and loads are typically substantial. The P5T2 Series is ideal for handling frequent stops on conveyor equipment, tamping and pressing on packaging machinery, as well as the unloading/loading and clamping processes on assembly machinery. SPECIFICATIONS Available in 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100mm bore sizes with strokes up to 200mm. Maximum operating pressure is 1MPa (10 bar/145 psi). Standard through-hole mounting on all sizes and available rear mounting, when special ordered, on all sizes, ensuring drop-in capabilities for a variety of installations. Top porting is standard, but rear and side porting are available on all sizes as well. A true rod-lock mechanism, which stops the unit in current position upon loss of air pressure, is available on 32mm through 100mm bore sizes.

The addition of the twin rod cylinder to the already successful P5T family provides a complete line of compact, short stroke actuators. The twin rod is available in 6, 10, 16, 20, 25 and 32mm bore sizes with strokes up to 200mm. Internal bumpers are provided for the extend stroke, and an adjustable retract bumper-stop is standard. The twin rod cylinder is available in both a single and a dual tooling plate version. The porting on the twin rod cylinder is designed to allow maximum flow rates to each cylinder bore. A magnetic piston is standard and can be detected through the use of Parkers new miniature sensors. SPECIFICATIONS Maximum operating pressure: 150 psi (air) Standard stroke lengths to 200mm Six bore sizes sizes: 6, 10, 16, 20, 25 and 32 mm - 6mm and 10mm only available with the single tooling plate version Stroke tolerance: +0.8, -0.0mm (+.030, -.000 inch) Operating temperature range (cylinder): Standard seals -18C to +74C (0 to 165F) Fluorocarbon seals* -18C to +121C (0 to 250F) Filtration requirement: 40 micron filtered, dry air

The addition of the twin rod cylinder to the already successful P5T family provides a complete line of compact, short stroke actuators. The twin rod is available in 6, 10, 16, 20, 25 and 32mm bore sizes with strokes up to 200mm. Internal bumpers are provided for the extend stroke, and an adjustable retract bumper-stop is standard. The twin rod cylinder is available in both a single and a dual tooling plate version. The porting on the twin rod cylinder is designed to allow maximum flow rates to each cylinder bore. A magnetic piston is standard and can be detected through the use of Parkers new miniature sensors. SPECIFICATIONS Maximum operating pressure: 150 psi (air) Standard stroke lengths to 200mm Six bore sizes sizes: 6, 10, 16, 20, 25 and 32 mm - 6mm and 10mm only available with the single tooling plate version Stroke tolerance: +0.8, -0.0mm (+.030, -.000 inch) Operating temperature range (cylinder): Standard seals -18C to +74C (0 to 165F) Fluorocarbon seals* -18C to +121C (0 to 250F) Filtration requirement: 40 micron filtered, dry air

Description: The magnetic rodless cylinder is a pneumatic cylinder featuring a mobile piston fitted with annular magnets. The mobile carriage is also equipped with magnets to provide magnetic coupling between the piston and carriage. Cushioning: - 16 mm: non-adjustable bumper or adjustable pneumatic cushioning. - 20 and 32 mm: adjustable pneumatic cushioning. Mounting: The mobile carriage is free to rotate 360 around the cylinder axis. This feature facilitates the adaptation of the cylinder to various mounting arrangements. Description Value PRODUCT TYPE Pneumatic Cylinder Compact BORE 040 PORTS M - Metric SEALS V - Fluorocarbon Configurator NO CAD Drawing Available NO