actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Heavy Duty Electric Cylinders - Acme Screw Driven

Heavy Duty Electric Cylinders - Acme Screw Driven

PowerAcâ„¢ Acme screws are made form 4140 Alloy steel with a black oxide finish with a 2C (Centralizing) thread form. Nook acme nut material has been selected for low friction, minimum wear, long life, and clean operations.

Display: List / Grid
Show:
Sort By:
Double Reduction Electric Cylinder  - preselected motor
Home / Rod Style Actuators / Heavy Duty Electric Cylinders / Double Reduction Electric Cylinder <:section class=productCategoryContent nodeIndex="1" sizcache0052141507777994256="0"> Double Reduction Electric Cylinder Features   RAD Acme Screw Worm Gear Electric Cylinders RAD Electric Cylinders incorporate the same benefits as DD Electric Cylinders, including the rugged design and capacities from 3,500 lbs. to 40,000 lbs. RAD Electric Cylinders include a second reduction giving a reduced input torque and lower travel rate. RAD Electric Cylinders also feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is available on request. The drive sleeve is supported on anti-friction tapered roller or ball thrust bearings. The electric cylinder housing is made of ductile iron and proportioned to support the rated capacity of the unit.   RAD Electric Cylinders are ruggedly designed and produced in standard models with thrust capacities from 500 lbs. to 40,000 lbs. They feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint i

Double Reduction Electric Cylinder  - standard
Double Reduction Electric Cylinder Features   RAD Acme Screw Worm Gear Electric Cylinders RAD Electric Cylinders incorporate the same benefits as DD Electric Cylinders, including the rugged design and capacities from 3,500 lbs. to 40,000 lbs. RAD Electric Cylinders include a second reduction giving a reduced input torque and lower travel rate. RAD Electric Cylinders also feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is available on request. The drive sleeve is supported on anti-friction tapered roller or ball thrust bearings. The electric cylinder housing is made of ductile iron and proportioned to support the rated capacity of the unit.   RAD Electric Cylinders are ruggedly designed and produced in standard models with thrust capacities from 500 lbs. to 40,000 lbs. They feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is available on request. PowerAcâ„¢ Acme screws are made from 4140 Alloy steel with a black oxide finish with a 2C (Centralizing) thread form. Nook acme nut material has been selected for low fric

Single Reduction Electric Cylinder  - preselected motor
Home / Rod Style Actuators / Heavy Duty Electric Cylinders / Single Reduction Electric Cylinder <:section class=productCategoryContent nodeIndex="1" sizcache06059968739800086="0"> Single Reduction Electric Cylinder Features   DD Worm Acme Screw Gear Electric Cylinders DD worm gear driven Electric Cylinders incorporate an alloy steel worm which drives a high strength bronze worm gear (drive sleeve). The worm shaft is supported on anti-friction tapered roller bearings with external seals provided to prevent loss of lubrication (sealed radial ball bearings on the Series 5 and Series 10 units). The drive sleeve is supported on anti-friction tapered roller or ball thrust bearings. The electric cylinder housing is made of ductile iron and proportioned to support the rated capacity of the unit.   DD Electric Cylinders are ruggedly designed and produced in standard models with thrust capacities from 500 lbs. to 40,000 lbs. DD Electric Cylinders feature a single reduction and are intended for use in industrial environments. They feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is a

Single Reduction Electric Cylinder  - standard
Single Reduction Electric Cylinder Features   DD Worm Acme Screw Gear Electric Cylinders DD worm gear driven Electric Cylinders incorporate an alloy steel worm which drives a high strength bronze worm gear (drive sleeve). The worm shaft is supported on anti-friction tapered roller bearings with external seals provided to prevent loss of lubrication (sealed radial ball bearings on the Series 5 and Series 10 units). The drive sleeve is supported on anti-friction tapered roller or ball thrust bearings. The electric cylinder housing is made of ductile iron and proportioned to support the rated capacity of the unit.   DD Electric Cylinders are ruggedly designed and produced in standard models with thrust capacities from 500 lbs. to 40,000 lbs. DD Electric Cylinders feature a single reduction and are intended for use in industrial environments. They feature ground and hard chrome plated actuator tubes. The exterior surfaces feature industrial enamel paint. Epoxy paint is available on request. PowerAcâ„¢ Acme screws are made from 4140 Alloy steel with a black oxide finish with a 2C (Centralizing) thread form. Nook acme nut material has been selected for low frict

Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site