actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Magnatrol BRONZE SOLENOID VALVE "GRITTY COOLANT"

Magnatrol BRONZE SOLENOID VALVE "GRITTY COOLANT"

OPERATION:
Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and sealing it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston, allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.

CONSTRUCTION: (* Wetted parts)
*Valve Body - Cast Bronze, Globe Pattern - NPT ends
*Piston - Cast Bronze
Coil Enclosure - Malleable or Cast Iron, 1/2” NPS conduit conn.
*Plunger - 430 Stainless Steel
*Poppet - 303 Stainless Steel
*Stem - 303 Stainless Steel

*Bonnet Tube - 304 Stainless Steel
*Spring - Inconel and 302 Stainless Steel
*Body Seal - Buna N or Non Asbestos Gasket
*Orifice Seal - Buna N (Viton or Glass Filled Teflon available)
*AC Shading Coil - Copper
*Stem Pin - 304 Stainless Steel
Coil - Encapsulated Class B, 18” leads - (Class H available)

MAX. FLUID TEMP.:212°F
MAX. STATIC PRESSURE:300 PSI

APPLICATION:
To control the flow of "Coolant", the valve is designed with the piston "turned down" and a larger pilot port, offering additional clearance, allowing the valve to operate with fluids containing some grit/sediment typically found in coolant. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.

Type No.
MS33AR42-C
MS18AR23-C
MS233AR43-C
MS33AR44-C
MS233AR24-C
MS233AR44-C

There are no products to list in this category.
Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site