Magnatrol Clark cooper HIGH PRESSURE SOLENOID VALVES

OPERAtION: this direct ActiNG, normally closed valve opens when energized and closes when de-energized. When the coil is energized the plunger lifts the piston of the valve seat, opening the valve.  upon de-energizing the coil, a spring closes the piston to seat it.  the normally open valve operates similarly, closing when energized and opening when de-energized. NO MINIMUM PRESSURE REQUIRED APPLICAtION: to control the low of High Pressure Air, Water, Hydrogen, Nitrogen and other gases or light liquids compatible with materials of construction.  suitable for Cryogenic applications. CONStRUCtION VALVE BODY:  316 ss PIStON/SEAL:  303 ss / telon? O RING SEAL: telon? SPRING:  302 ss PLUNGER:  430 ss BONNEt:  316 ss/430 ss BONNEt REtAINER:  430 ss           FLUID tEMP.:  -350!a to 400! SHIPPING Wt.:  3 LBs. ELECtRICAL POWER:  22 Watts AC INRUSH:  2.5 AMP @ 120v Ac AC HOLDING:  0.2 AMP @ 120v Ac INSULAtION: class !°H DUtY: continuous ENCLOSURE:  NeMA 4 and 7 CONNECtION:  1/2!± Nt, 18!± Lead MODEL #:    EH30-04X-XXXX-X

Application: The EH40 series is ideal for low control of high pressure air, water, compressed natural gas (CNG), hydrogen, nitrogen,and other gases or light liquids compatible with the materials of construction. The mounting orientation is critical,requiring the valve to be mounted with the solenoid vertical and on top. CONSTRUCTION VALVE BODY:  316 SS PISTON:  PEEK? O RINGS:  Buna-N / Viton / Telon BACKING RINGS:  Buna-N / Viton / Telon PISTON RING/SEAL:  Telon? / 302 SS CARTRIDGE:  316 SS / 430 SS PILOT/SEAL:  303 SS / Telon? SPRING:  302 SS PLUNGER:  430 SS BONNET RETAINER:  430 SS CARTRIDGE GASKET:  Nylon FLUID TEMPERATURE RANGE: BUNA:  -35!a to 250! VITON:  -15!a to 400! TEFLON:  -330!a to 500! Pipe Size   Min. Diff.   Dimensions in inches   Type No. Cv Watts lbs. Inches PSI E D C B A EH40-04 1/4! 1.1 10 450 2.25 0.87 4.14 1.95 3.02 EH40-08 31/2! 1.33 4.75 2 4.5 10 7100 3.625 PRESSUREELECTRICAL (COIL)        (STD)    (XP) MAXIMUM OPERATING PRESSURE: POWER:       10 Watts&

OPERAtION: the normally closed valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the inlet pressure. upon de-energizing the coil, a spring closes the pilot valve and pressure builds above the piston to seat it. the normally open valve operates similarly, closing when energized and opening when de-energized. APPLICAtION: to control the low of High Pressure Air, Water, Natural Gas, Hydrogen, Nitrogen and other gases or light liquids compatible with materials of construction. valve must be mounted with solenoid vertical and on top. CONStRUCtION VALVE BODY:  7075-t6 Aluminum,   Anodized PIStON:  PeeK? O RINGS:  Buna-N BACKING RINGS:  Buna-N PIStON RING/SEAL:  telon? / silicone CARtRIDGE:  316 ss/430 ss PILOt/SEAL:  303 ss / telon? SPRING:  302 ss PLUNGER:  430 ss BONNEt REtAINER:  430 ss CARtRIDGE GASKEt:  Nylon FLUID tEMPERAtURE RANGE: BUNA:  -50!a to 230! VItON:  -10!a to 400! SHIPPING WEIGHt: 5 LBs.    C  = 4.5 V Dimensions are in inches

OPERAtION: valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. the normally open valve  operates similarly, closing when energized and opening when de-energized. NO MINIMUM PRESSURE REQUIRED APPLICAtION: to control the low of Corrosive Fluids  Deionized Water  Condensate  Ammonias  Vegetable Oils  Fuel Oils  Cryogenics  Flammable Liquids and Gases. valve operates from zero to maximum diferential pressure indicated in table.  valve can be mounted in any orientation. CONStRUCtION VALVE BODY:  316 ss Globe Pattern   NPt end connections PIStON:  303 ss        PLUNGER:  430 ss PILOt VALVE:    303 ss BONNEt tUBE:  304 ss SPRING:  302 ss BODY SEAL:  Non Asbestos Gasket (durlon 8500?) VALVE DISC: telon? COIL:  encapsulated class !°H!±, 18!± leads - Alc

APPLICATION: Clark-Cooperfls Rotary Shaft Style Solenoid Valves are used to control the  ow of Extremely Corrosive Fluids  Dirty Fluids Viscous Fluids  Cryogenics  Fuel Oils  Flammable Liquids and Gases  Steam  High Temperature Liquids and Gases Heat Transfer Liquids.  The valves are used for applications where it is desirable to have the solenoid and all its magnetic components isolated from the process fluid. Solenoid Characteristics Solenoid Coil: Class H, Continuous Duty 18  long, 18 gage wire lead Solenoid Enclosure: NEMA 4X, Watertight and Corrosion Resistant and NEMA 7, Explosion-proof, Class I, Groups B, C and D, Division 1 Conduit Connection:  1/2 NP AC voltages suitable with 50 and 60 Hertz

APPLICATION: Clark-Cooperfls Rotary Shaft Style, 3-Way Diverting Solenoid Valves are used to control the  ow of Extremely Corrosive Fluids  Dirty Fluids  Viscous Fluids  Cryogenics  Fuel Oils  Flammable Liquids and Gases  Steam  High Temperature Liquids and Gases  Heat Transfer Liquids.  The valves are used for applications where it is desirable to divert the process  uid to another location, such as a recirculation tank. Solenoid Characteristics Solenoid Coil: Class H, Continuous Duty 18  long, 18 gage wire lead Solenoid Enclosure: NEMA 4X, Watertight and Corrosion Resistant and  NEMA 7, Explosion-proof, Class I, Groups B, C and D,Division 1 Conduit Connection:  1/2 NP AC voltages suitable with 50 and 60 Hertz