Vega Hydrostatic pressure measurement
The measuring cell of the pressure transducer detects small changes in hydrostatic pressure, which increases or decreases depending on the filling level. The acting pressure is converted into an electrical signal by the integrated electronics and converted into an output signal.
Different measuring cells are used for hydrostatic pressure measurement.
The advantages
Ceramic measuring cells offer the advantage of excellent long-term stability and high overload resistance. Metallic measuring cells also cover higher measuring ranges.
VEGABAR 86VEGABAR 87VEGABAR 66VEGABAR 67VEGAWELL 52
Application area
The VEGABAR 87 is a pressure transmitter for pressure and level measurements of liquids and viscous products with higher temperatures in the chemical, Food processing and pharmaceutical industry. With VEGABAR 87 it is possible to detect even smallest measuring ranges from 0.1 bar.
Your benefit
Maximum reliability even with rapidly changing process temperatures
High plant availability through vacuum-resistant version
Very good cleanability and high chemical resistance through adapted materials
Technical data
Measuring cell
METEC®
Sensor diameter
40 mm
Measuring range
0 … +25 bar
(0 … +2500 kPa)
Process fitting
straining clamp, threaded fitting
thread from G1½, 1½ NPT
flanges from DN 40, 2"
Process temperature
-12 ... +100 °C
Accuracy class
0,1 %

Application area
The VEGABAR 86 is a suspension pressure transmitter for level measurement in wells, basins and open vessels. Thanks to the flexibility through different cable and tube versions, VEGABAR 86 can be used in various applications.
Your benefit
High plant availability through maximum overload and vacuum resistance of the ceramic measuring cell
Self-cleaning effect through front-flush installation
Low maintenance costs through wear-free ceramic measuring cell
Technical data
Measuring cell
CERTEC®
Sensor diameter
32 mm
Measuring range
0 … +25 bar
(0 … +2500 kPa)
Process fitting
straining clamp, threaded fitting
thread from G1½, 1½ NPT
flanges from DN 40, 2"
Process temperature
-20 … +100 °C
Accuracy class
0,1 %

Application area
The VEGAWELL 52 is suitable for continuous level measurement of liquids. Typical applications are measurements in water/waste water, deep wells and in the shipbuilding industry.
Advantages
High reliability through maximum overload and vacuum resistance of the ceramic measuring cell
High plant availability through integrated overvoltage protection
Versatile use through robust housing and cable design
Technical data
Measuring cell
CERTEC
Sensor diameter
from 22 mm
Measuring range
0 … +60 bar (0 … +6000 kPa)
Process temperature
-20 … +80 °C
Deviation in characteritics
0.2 %; 0.1 %

Application area
The VEGABAR 66 is a suspension pressure transmitter for level measurement in wells, basins and open vessels. The flexibility through different cable and rod versions offers the possibility to use VEGABAR 66 in a variety of applications.
Advantages
High plant availability through maximum overload and vacuum resistance of the ceramic measuring cell
Self-cleaning effect through front-flush design
Low costs for maintenance through wear-free ceramic measuring cell
Technical data
Measuring cell
CERTEC
Sensor diameter
32 mm
Measuring range
0 … +25 bar (0 … +2500 kPa)
Process fitting
thread from G1½, 1½ NPT
flanges from DN 40, 2"
Process temperature
-40 … +100 °C
Deviation of characteritics
0.1 %
SIL qualification
optionally up to SIL2

Application area
The VEGABAR 67 is a suspension pressure transmitter for level measurement in wells, basins and open vessels. The VEGABAR 67 offers the possibility to detect also smallest measuring ranges from 0.1 bar. Measured products are liquids and viscous products with higher temperatures.
Advantages
Maximum reliability even with quickly changing process tempratures
High plant availability through vacuum-resistant version
Very good cleanability and high chemical resistance through adapted materials
Technical data
Measuring cell
METEC
Sensor diameter
40 mm
Measuring range
0 … +25 bar (0 … +2500 kPa)
Process fitting
thread from G1½, 1½ NPT
flanges from DN 50, 2"
Process temperature
-12 … +100 °C
Deviation in characteritics
0.1 %
SIL qualification
optionally up to SIL2

Showing 1 to 5 of 5 (1 Pages)
