Dynisco pressure transmitter Melt Pressure Sensors with mV/V Outputs

Features and Benefits Accuracy ±0.5% 3 mV/V, 5 Vdc and 10 Vdc outputs 0 - 100 to 0 - 30,000 psi Excellent temperature compensation Internal shunt calibration Bonded strain gage sensor Description Models 830, 831, 850, 851, 860 and 861 general purpose transducers offer flexible design and a pressure measurement accuracy of ±0.50% full scale output. Interchangeable configuration allows users to specify the pressure range, pressure port and output level that meet specific application requirements. A bonded strain gage sensor provides reliable operation in a wide range of industrial applications.

Features and Benefits Accuracy ±0.25% 3 mV/V, 5 Vdc and 10 Vdc outputs 0 - 100 to 0 - 30,000 psi Excellent temperature compensation Internal shunt calibration Bonded strain gage sensor Description Models 830, 831, 850, 851, 860 and 861 general purpose transducers offer flexible design and a pressure measurement accuracy of ±0.25% full scale output. Interchangeable configuration allows users to specify the pressure range, pressure port and output level that meet specific application requirements. A bonded strain gage sensor provides reliable operation in a wide range of industrial applications.

Features and Benefits 2 year warranty and 60 years of Dynisco industry experience Accuracy better than ±0.5% TiAlN diaphragm coating is standard mV/V, 0-10VDC, or mA outputs available Integral temperature sensor option Available in configurations that fit most extruder applications 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability Description The Echo™ Series of melt pressure sensors offer quality performance and value for plastic processing utilizing standard configurations and pressure ranges. Echo sensors are designed to meet customer requirements by providing a combination of economic value and performance for general extrusion applications while providing a ±0.2% repeatability when measuring process pressures. Use Echo Series sensors when the application requires a quality measurement for optimized control, but not the costs of all the extra features. Dynisco has produced field-proven pressure sensors for more than 60 years. Echo was designed with the best engineering practices and is backed by Dynisco with a two full years of warranty – double the protection of comparably-priced sensors. Echo sensor diaphragms are coated with Titaniu

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.5% Pressure ranges from 0 - 35 BAR to 0 - 700 BAR Temperature up to 538°C All welded stainless steel with washdown capability Available with hermetic connector or conduit fitting Internal 80% shunt calibration CE approved Description Dynisco's LDA415 Series of washdown pressure transducers are the ideal choice for food and medical extrusion measurements requiring washdown capability and a mercury free sensor. Model LDA415 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 538°C. The transducers are supplied with a high accuracy (0.5%), great repeatability and reliability. An 1/2-14 NPT conduit fitting or 6-pin hermetically sealed bendix-style connector is used for easy connect and disconnect.

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.25% Pressure ranges from 0 - 35 BAR to 0 - 700 BAR Handles temperatures up to 1000°F Superior thermal compensation Inconel diaphragm Internal 80% shunt calibration CE Approved Description Dynisco's MDA410 Series of pressure transducers are the ideal choice for non-mercury, food and medical extrusion applications requiring a fill material that meets FDA and USDA requirements. Model MDA410 uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000°F. The transducers are supplied with a high accuracy (0.25%), great repeatability and reliability. An 6-pin bendix-style connector is used for easy connect and disconnect. The MDA410 is the most commonly used alternate fill melt pressure transducer in the world.

Features and Benefits Accuracy better than ±0.25% DyMax® coated stainless steel wetted parts Proven sensor design Excellent thermal stability and repeatability 0 - 500 to 0 -30,000 psi Internal 80% shunt calibration Description The MDA420 Series transducer is a ±0.25% sensor ideal for melt pressure applications requiring high accuracy, simple installation, repeatability and reliability. The MDA420 transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The MDA420 comes equipped with an eight pin Bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The MDA420 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.25% Pressure ranges from 0 - 35 BAR to 0 - 2,000 BAR Fits in tight locations Internal 80% shunt calibration CE approved Description Model MDA435 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The MDA435 features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect. The MDA432 designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Features and Benefits Accuracy better than ±0.5% DyMax® coated stainless steel wetted parts Proven sensor design 0 - 500 to 0 -30,000 psi Internal 80% shunt calibration Description The MDA460 Series transducer is a Â±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The MDA460 comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The MDA460 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Features and Benefits 6 mm sensing diaphragm Pressure ranges from 0 - 350 BAR to 0 - 700 BAR Accuracy of better than ±1% 3.33 mV/V full scale output Internal 80% shunt calibration Good stability and repeatability Reduces mounting hole dead space Flexible stem offers greater thermal isolation and mounting ease CE approved Description Dynisco's MDA462-M10 melt pressure transducer utilizes a small 6mm sensing diaphragm for space restricted areas making it the ideal choice for small extruders and rheometers. The MDA462 provides simple installation, high accuracy (1%), repeatability and reliability. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect.

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.5% Pressure ranges from 0 - 100 Bar to 0 - 2,000 Bar Fits in tight locations Internal 80% shunt calibration CE approved Description Model MDA467 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The MDA467 features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect. The MDA467 designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Features and Benefits Accuracy of better than ±1.0% Four user selectable pressure ranges in one model Externally selectable range via rotary switch process conditions 3.33 mV/V FSO for selected range Internal 80% shunt calibration All stainless steel wetted parts Proven sensor design Description Now, users can select from among four pressure ranges on one transducer with the new Dynisco MRT, the first multi - range pressure transducer. By simply turning a rotary switch via an access pot on the transducer, four potential pressure ranges can be selected. The transducer can be ordered so that the equivalent psi, bar, Kg/cm2 or MPa ranges can be chosen. This revolutionary melt pressure transducer offers maximum versatility to handle changing process conditions and materials.

Features and Benefits 3 mV/V output Handles temperatures up to 285°F (140°C) All welded, stainless steel construction Rugged design Internal shunt calibration Compact Description Dynisco's PT130 Series is designed to measure hydraulic pressure on injection molding machines. The PT130 series withstands cyclic pressure and provides outstanding performance under the severe demands of measuring the injection ram and clamp pressure of injection molding machines. Variations in the hydraulic pressure profile indicate irregularities during the injection and feeding stages of the molding operation and provide information about the stability of the injection ram system.

Features and Benefits Flush diaphragm Zero volume pressure port 15 to 10,000 psi 3 mV/V output Internal shunt calibration Description Dynisco's PT311JA flush diaphragm pressure transducer is designed for applications requiring a zero volume pressure port. The flush diaphragm improves frequency response and has excellent cleanability. The PT311JA has a full scale output of 3mV/V and offers reliable and accurate pressure measurement of gases, viscous liquids and slurries

Features and Benefits Accuracy better than ±0.25% Measures up to 1000°F (538°C) NaK fill meets FDA and USDA requirements Inconel diaphragm 0 - 500 to 0 -10,000 psi 3.33 mV/V FSO Description The PT410 Series transducer is a ±0.25% sensor ideal for food or medical applications requiring high accuracy, simple installation, repeatability and reliability. The NaK fill material meets the requirements set forth by both the FDA and USDA for contact with food and medical products. The PT410 Series transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The PT410 comes equipped with an eight pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT410 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections, if desired.

Features and Benefits Better than ±0.5% accuracy Sealed stainless steel housing and stem Standard conduit, optional hermetic fitting Internal 80% shunt 3.33 mV/V FSO FDA recognized as safe (GRAS) Description Model PT415 features a stainless steel electronics housing and stem, allowing it to be used in such applications as food and photographic processing where it may be washed down regularly. The standard conduit fitting may be replaced by a hermetic 6 - pin connector (Option B314).