Dynisco pressure transmitter Melt Pressure Sensors with mV/V Outputs

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.5% Pressure ranges from 0 - 500 psi to 0 - 10,000 psi All welded stainless steel with washdown capability FDA recognized safe (GRAS) for food and medical applications Available with hermetic connector or conduit fitting Internal 80% shunt calibration CE approved Description Dynisco's PT415D Series of washdown pressure transducers are the ideal choice for food and medical extrusion measurements requiring a fill material that meets FDA and USDA requirements. Model PT415D uses a special high temperature fill (NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000°F. The trasnducers are supplied with a high accuracy (0.5%), great repeatability and reliability. An 1/2-14 NPT conduit fitting or 6-pin hermetically sealed bendix-style connector is used for easy connect and disconnect.

Features and Benefits Accuracy better than ±0.25% DyMax® coated stainless steel wetted parts Proven sensor design Excellent thermal stability and repeatability 0 - 500 to 0 -30,000 psi Internal 80% shunt calibration Description The PT420 Series transducer is a ±0.25% sensor ideal for melt pressure applications requiring high accuracy, simple installation, repeatability and reliability. The PT420 transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The MPT420 comes equipped with an eight pin Bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT420 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.25% Pressure ranges from 0 - 500 psi to 0 - 30,000 psi DyMax® coated 15-5 stainless steel wetted parts Excellent thermal stability and repeatability Designed for space restricted areas Internal 80% shunt calibration CE approved Description Model PT435A Series of pressure transducers are the ideal choice for high accuracy polymer melt pressure measurements with space restriction issues. The PT435A features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 8-pin bendix-style connector is used for easy connect and disconnect. The PT435A designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Features and Benefits Accuracy of better than ±0.25% Choice of flanged or threaded configurations 0 - 250 to 0 - 10,000 psi Withstands processes up to 700°F Internal 80% shunt calibration Replacement for traditional “button - seal” units Description Dynisco’s PT450 Series offers melt pressure measurement in ranges from 0 - 250 through 0 - 10,000 psi at accuracies down to 0.25% and process temperatures up to 700°F. For easy installation, the flexible stem transducer is offered in flanged (model PT450FA) and threaded (model PT450TA) versions. Both models are ideal for processing low viscosity materials and applications such as fiber spinning and polymer transport lines.

Features and Benefits Accuracy better than ±0.5% DyMax® coated stainless steel wetted parts Proven sensor design 0 - 500 to 0 -30,000 psi Internal 80% shunt calibration Description The PT460E Series transducer is a ±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. The PT460E comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460E features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Features and Benefits Accuracy better than ±1.0% Inconel diaphragm Superior temperature stability Patented sensing element 0 - 3,000 to 0 -30,000 psi Internal 80% shunt calibration Description The PT460XL Series transducer is a ±1.0% sensor ideal for abrasive and/or corrosive melt pressure applications requiring simple installation, repeatability and reliability. The PT460XL transducers provide the industry standard 3.33 mV/V signal designed to work with most pressure indicators. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460XL features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Features and Benefits 6 mm sensing diaphragm 3.33 mV/V full scale output Accuracy of better than ±1% Pressure ranges from 0 - 5,000 psi to 0 - 10,000 psi Good stability and repeatability Flexible stem offers greater thermal isolation and mounting ease Internal 80% shunt calibration CE approved Description Dynisco''s PT462E-M10 melt pressure transducer utilizes a small 6mm sensing diaphragm for space restricted areas making it the ideal choice for small extruders and rheometers. The PT462E-M10 provides simple installation, high accuracy (1%), repeatability and reliability. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect.

Features and Benefits 3.33 mV/V full scale output Compliment to in-mold transducers Accuracy of better than ±0.5% Pressure ranges from 0 - 3,000 psi to 0 - 10,000 psi Rugged Inconel 718 diaphragm 1 inch flex band radius Free spinning jam nut for ease of installation Minimum mounting space required Internal 80% shunt calibration CE approved Description Model PT465XL Series of pressure transducers measure polymer melt pressure in an injection molding machine nozzle or a hot runner. A protective flexible armored cable extends from its electronic housing to the tip for unmatched strength and increased life. Located in the nozzle, the PT465XL provides a very accurate (0.5%) measurement of the pressure of the plastic melt entering the mold. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with an Inconel diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect. The PT465XL is designed for the restricted locations is ideal for nozzle and hot runner pressure measurements in Injection Molding.

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±0.5% Pressure ranges from 0 - 500 psi to 0 - 30,000 psi Fits in tight locations Internal 80% shunt calibration CE approved Description Model PT467E Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The PT467E features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect. The PT467E designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Features and Benefits 3.33 mV/V full scale output 6 mm sensing element Accuracy of better than ±1% Pressure ranges from 0 - 5,000 psi to 0 - 10,000 psi Good stability and repeatability Fits in space limited areas Internal 80% shunt calibration CE approved Description Model PT467E-M10 Series of pressure transducers features a small, 6 mm sensing element ideal for general purpose polymer melt pressure measurements with space restriction issues or on small lab extruders and rheometers. The PT467E-M10 features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect. The PT467E is designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding, small lab extruders and rheometers

Features and Benefits 3.33 mV/V full scale output Accuracy of better than ±1% Pressure ranges from 0 - 3,000 psi to 0 - 30,000 psi Superior temperature stability Abrasion resistant Inconel diaphragm Designed for space restricted areas Internal 80% shunt calibration CE approved Description Model PT467XL Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The PT467XL features a 0.06" diameter exposed capillary. This allows 1/16" radius bends. It also has a free-spinning jam nut that simplifies installation. Standard transducers are supplied with Inconel diaphragms for increased wear resistance and longevity. A 6-pin bendix-style connector is used for easy connect and disconnect. The PT467XL designed for the restricted locations is ideal for nozzle and hot runner pressure measurements in Injection Molding.

Features and Benefits No fill material or moving internal parts RoHS compliant for sustainability programs Robust Inconel diaphragm is coated with DyMax® Diaphragm is much thicker with unique sidewall support Available with J-type thermocouple temperature output 0-1,500 to 0-10,000 psi pressure range capability The first and only 4-YEAR WARRANTY Description Vertex™ is a Dynisco melt pressure sensor innovation that matches or exceeds the performance of the traditional sensor. The big differences are that Vertex is more robust, much faster, and significantly friendlier to the environment. The breakthrough technology lies at the tip of the sensor, where melt pressure is registered directly through a single, more robust diaphragm. Direct measurement eliminates errors that can arise in sensors with complicated internal structures, transmission fluids and moving push rods. The Vertex diaphragm is much thicker than those in other sensors and is made of tough Inconel 718 alloy, which provides a higher level of corrosion resistance than stainless steel. For added protection, the tip is coated with a diamond-hardened DyMax® coating. The sensor walls have been f