Burkert valve High pressure up to 250 bar Type 2200 - Direct acting solenoid valve for high pressure up to 250 bar

2/2-way Solenoid Valve for
higher pressures, G 1/4
 Pressure range up to 250 bar
 Direct-acting, normally closed and normally open
 Electrical connection cable plug Form A
 Also available with ATEX approval

Technical data
G 1/4
Port connection
DN 1.2 - 2.0
Ori ce
Stainless steel 1.4401
Body material
Epoxy
Coil material
H
Coil insulation class
Stainless steel/PCTFE
Seal material
Neutral gases and liquids
Media
-10! to +130!
Media temperature
max. +55!
Ambient temperature
2
max. 21 mm
/s
Viscosity
24 V DC, 24 / 230 V / 50 Hz
Operating voltage
other voltages on request
!10
Voltage tolerance
max. 100/min.
Cycling rate
100% continuous rating
Duty cycle
DIN EN 175301-803 Form A for cable plug Type 2508
Electrical connection
IP65 with cable plug
Protection class
As required, preferably with actuator in upright position
Installation

Technical data, continued
Power consumption  Response times
Response times
Voltage AC  Voltage DC
Power consumption Power
AC and DC
consumption
InrushHold (hot coil)
Opening [ms]Closing [ms]
[VA][VA][W](hot /cold coil) [W]
20-3020-30
854814 14 / 18
Response times [ms]:
Measured at valve outlet at 6 bar and +20 !
Opening: pressure build-up 0 to 90%,
closing: pressure relief 100 to 10%
Ordering chart for valves (further versions on request)
Valves with stainless steel body, seal material stainless steel/PCTFE, with cable plug
Item no. per voltage/frequency
2)
[V/Hz]
1)
 ce [mm]
/h]
3
Circuit function Port connection Ori Kv value water [m Pressure range [bar] Weight [kg] 024/DC 024/50 230/50
G 1/41.20.030-2501.22000 487000 733000 474
A 2/2-way
valve, NC
2.00.090-1501.22C000 673000 63

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: