actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Konan Intrinsic Safety Solenoid Valves Explosion barrier SAF3-5 , MTL728+

Intrinsic safety explosion barrier is an explosion-proof device with single channel, shunt-diode DC circuit that enables interactive electric signaling without short circuit while controlling energy transmission in order to prevent ignition in explosive atmosphere.

1.Applicable to Zone 0.

2.When serially connected to a transmission circuit, the barrier protects

   the circuit and components in hazardous area from being affected by

   a serious accident in the non-hazardous area.

3.Despite in the hazardous location, conventional wiring is available.

4.Intrinsical proof of operational signal is figured out easily and at lower

   cost.
5.As SAF3-5 safety barrier has protection circuit, it will be not broken

   if you wired in the wrong polarity.
6.SAF3-5 safety barrier employ crimping terminal wiring method.

Model code SAF3-5 MTL728+
Explosion-proof construction Intrinsic safety construction(ExiaⅡB) Intrinsic safety construction(i2G4)
Rated voltage DC24V±5% -
Max. working voltage - DC25.5V
Max. allowable voltage - DC26.6V
Safety retention voltage AC/DC 250V
Rating of a fuse 50mA
Ambient temp. -20~60℃ -10~60℃
Basic circuit figure
Operating condition

1.Place the valve in non-hazardous area.

2. Parts and connections cannot be changed.

3. Use with specified solenoid valves.

 4. Allowable inductance for external connection: 10mH / Capacitance: 0.5 μF

 4. Allowable inductance for external connection: 1mH / Capacitance: 0.05 μF

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site