Magnatrol standard BRONZE SOLENOID VALVE TYPE "D" FULL PORT

BRONZE SOLENOID VALVE TYPE "D" FULL PORT
NORMALLY CLOSED - 3/8" TO 2" PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN

OPERATION:
Valve opens when energized and closes when de-energized. In this direct acting valve the disc holder assembly is lifted from its seat by the plunger.

CONSTRUCTION: (* Wetted parts)
*Valve Body - Cast Bronze, Globe Pattern - NPT ends
*Disc Holder - Brass
Coil Enclosure - Malleable or Cast Iron, 1/2” NPS conduit conn.
*Plunger - 430 Stainless Steel
*Stem - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - 302 Stainless Steel
*Body Seal - Buna N
*Orifice Seal - Buna N (Viton or Glass Filled Teflon available)
*AC Shading Coil - Copper
*Stem Pin - Inconel
Coil - Encapsulated Class B, 18” leads - (Class H available)

APPLICATION:
To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the main orifice make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.

MAX. FLUID TEMP.:212°F
MAX. STATIC PRESSURE:150 PSI

Pipe	Max.	Type No.	Watts	Amps	Amps Inrush	Watts	Ship
Size	Diff.		AC	Hold	120-60	DC	Wt.
Inches	PSI			120-60			Lbs.
3/8"	15	18D11	25	0.4	1	18	7
	30	33D11	45	0.8	2.3	23	10
1/2"	10	18D12	25	0.4	1.1	18	7
	20	33D12	45	0.8	2.4	23	10
3/4"	4	18D13	25	0.4	1.2	18	8
	7.5	33D13	45	0.8	2.5	23	12
1"	2	18D14	25	0.4	1.4	18	9
	3.5	33D14	45	0.8	2.7	23	13
1 1/4"	1.3	18D15	25	0.4	1.5	18	10
	2.3	33D15	45	0.8	2.8	23	14
1 1/2"	0.8	18D16	25	0.4	1.7	18	12
	1.5	† 33D16	45	0.8	3	23	15
2"	0.8	33D17	45	0.8	3.4	23	19
	1.2	† 133D17	65	1.2	4.2	33	19

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: