Dwyer pressure transmitter Series 3200G Explosion-proof Pressure Transmitter

The Mercoid® Series 3200G Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3200G is FM approved for use in hazardous (Classified) locations. The 100:1 rangeability allows the smart transmitter to be configured to fit any application.

FEATURES
Completely configurable using zero/span buttons (No calibrator required)
Rangeablity (100:1)
High accuracy (0.075%)
Automatic ambient temperature compensation
Fail-mode process function

SPECIFICATIONS
Service: Compatible gases, steam, liquids or vapors.
Wetted Materials: 316L SS.
Accuracy: 0.075% FS (@ 20C
Rangeablity: 100:1 turn down.
Stability: 0.125% FSO/yr
Temperature Limits:
Process: -40 to 248F (-40 to 120C
Ambient: Without LCD -40 to 185F (-40 to 85C
With LCD -22 to 176F (-30 to 80C
Thermal Effect: 0.125 %span /32.
Power Requirements: 11.9 to 45 VDC.
?
Communication.  
Output Signal: 4 to 20 mA / HART
Response Time: 0.12 seconds.
Damping Time: 0.25 to 60 seconds.
Loop Resistance:
Operation: 0-1500 Ohm;
?
HART Communication: 250-500 Ohm.
Electrical Connection: Two 1/2? NPTF conduit.
Process Connections: 1/2? NPTF.
Display: Optional: 5 digit LCD.
Enclosure Rating: NEMA 4X (IP66) and explosion proof for Class I,
Div I Groups A, B, C and D.
Weight: 8.6 lb.
Agency Approvals: FM, CE.

Model
3200G-1-FM-1-1
3200G-2-FM-1-1
3200G-3-FM-1-1
3200G-4-FM-1-1
3200G-1-FM-1-1-LCD
3200G-2-FM-1-1-LCD
3200G-3-FM-1-1-LCD
3200G-4-FM-1-1-LCD
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: