actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

GE General Eastern pressure transmitter DPS 4000 – Digital Pressure Transducer

The DPS 4000 Series is a state of the art range of digital output pressure transducers featuring a CANbus serial communications interface.

Fully temperature corrected pressure readings are output as a digital word in any one of 24 engineering units, requiring no user system set-up or calibration. The integral digital electronics enhance performance to levels unmatched by traditional analog transducers.

Features:

  • Ranges from 5 psi to 1000 psi
  • High accuracy over wide temperature range
  • Full CAN version 2.0B CANopen protocol
  • Input/output isolation
  • Device self-checking and diagnostics

Pressure Measurement
Operating Pressure Ranges Zero based ranges: 5 psi*, 10, 15, 30, 50, 100, 150, 300, 500 and 1000 psig (350 mbar, 700mbar, 1, 2, 3.5, 7, 10, 20, 35, 70 bar), absolute or differential.

Bi-directional gauge and differential ranges available on request.

*5 psi gage, or differential only
 
Overpressure The pressure range can be exceeded by the following with negligible effect on calibration:
Positive side: 4 x full scale (FS) (2000 psi maximum) (140 bar maximum)
Negative side: 2 x FS (150 psi maximum) (10 bar maximum).
Line Pressure 500 psi (35 bar) maximum (differential model only).
Positive Pressure Media Fluids compatible with Stainless Steel 316 L and Hastelloy C276.
Excitation Voltage 7.5 to 30 VDC.
Output Configuration CANopen digital data via CANbus interface. User configurable pressure reading
Software Protocol In accordance with:

•DS301 V 4.01 (CANopen)
•DS404 V 1.0 (Analog input device profile)
•DSP 305 V 1.0 (Layer setting service)
 

Performance
Accuracy 0.2% reading down to 50% FS, then 0.1% FS to zero. Includes all errors over 50°F to 140°F (10°C to 60°C).
Long Term Stability Typically less than 0.08% FS per annum.
Operating Temperature Range -40°F to 175°F (-40°C to 80°C). Insulation Resistance Greater than 100 MΩ at 500 VDC
Mechanical Shock 1000 g, 1 mS half sine pulse in three mutually perpendicular axes will not affect performance.
Vibration Response <0.05% FS/g at 30 g peak 10 Hz to 2 kHz, limited by 0.5 in (12 mm) double amplitude.
Safety CE Marked
EMC emissions: EN 50081-1
EMC immunity: EN 61000-6-2

Physical
Weight 0.19 kg (7 oz) nominal.
Pressure Connection Male:

•G1/8B (60° Int Cone)
•G1/4B (60° Int Cone or Flat End)
•1/4 NPT
•7/16 UNF to MS33656-4
•M14 x 1.5
Female:

•G1/4,
•1/4 NPT
•Others available - refer to Druck.
 
Electrical Connection MIL-C-26482 six pin bayonet plug or six core shielded cable (3 ft. supplied as standard)

Alternatives available - refer to Druck.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site