actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Fischer pressure transmitter Building technology DE45

The DE 45 is a multi-function pressure in-strument that combines a digital readout,dual limit detection relays, and optional transmitter output. It can measure positive gauge, negative gau-ge, or differential pressure. It is ideally suited for applications such as:
Ventilation and air handling systems
Climate control systems
Environmental systems

Features
Robust design; over-pressure tolerant
Maintenance-free
Selectable pressure units
Piecewise linear output transformation via
3...30 entries table
Applications
Monitoring of roll-band filters, vacuum systems,etc.
Chimney draught measurement
Flow and control-pressure measurement
Surface coating systems

Operating temp. (ambient)
-10 ... 70!a
Operating temp. (media)
-20 ... 70!a
Storage temperature
IP 65 per DIN 60529
Protection class (housing)
Electrical
24 V DC / AC
Nominal supply voltage
12 ... 32 V DC / AC
Operating supply voltage
0 ... 20 mA, 4 ... 20 mA, or 0 ... 10 V DC (3-wire)
Output signal
For current output: 600  max. at 24 V DC supply voltage;
Output signal load
or R
 (V  - 12 V) / 0.02 A
L supply
For voltage output: 2 K (V
  15 V DC)
supply10 K (V
= 12 ... 15 V DC)
supply
Power consumptionApprox. 2 W / VA
2 sets of voltage free contacts: N/O or N/C (programmable)
Relay contacts
V
 = 32 V DC / AC;  I = 2 A; P  = 64 W / VA
max max  max
Optional, instead of relay outputs: 2 voltage free MOSFET switch outputs; NO/NC
Solid-state switch outputs
(programmable), U = 3!-32 V DC/AC,
 = 0.6 A, P  = 20 W / VA, R   2.5
max max ON
Display3  digit LED
Connections, materials, mounting
Electrical connectionsTwo round-shell multi-pin connector sockets (M12)
Connector 1:  5-pin:  power input and analog signal output
Connector 2:  4-pin:  relay contacts / solid-state switch outputs
Pressure connectionsThreaded hose clamp connectors (aluminum) for 8/6 or 6/4 mm hose
Materials, housing Polyamide PAPA
Materials, media contact Silicon, PVC, aluminum, brass
MountingMounting holes at rear for panel mounting
Wall mountable using adaptor plate

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site