Huba Pressure sensor 400

The type 400 pressure transmitter, with its  proven ceramic lever technology, has  adjusted temperature compensated sensor  signals and is available with a voltage output. The (VDC) voltage output is an amplified, linear  signal suitable for direct processing in electronic control systems. The sensors are ideal for continuous level measurement in washing machines, dishwashers etc.

 Robust construction, sensor element
 has no contact with media  Special design developed for large
 scale manufacture at an attractive price  Fully automated manufacture,
 including in-line adjustment of zero
 point and full scale value  Special snap mounting bracket for easy
 single handed mounting in sheet steel
 of varying thicknesses

Technical Overview
1)
Pressure range
Relative     0 ... 10  100 mbar
Operating conditions
Medium      Liquids and neutral gases
    Medium / ambient    0 ... +70 ¨¤
Temperature
    Storage -10 ... +70 ¨¤
Tolerable overload    200 mbar
Rupture pressure    500 mbar
3
Leak rate     < 0.2 cm
/h (Air)
Materials in contact with the medium
Cover     Polypropylene
Diaphragm      Thermoplastic elastomer
Electrical overview
2)
Output / Power supply     ratiom. 10 ... 70% 5 VDC 5%
Load      > 50 kOhm / < 10 nF
Current consumption At nominal voltage with 50 kOhm load  < 3 mA
Polarity reversal protection     Mechanically protected
Electromagnetic compatibility  The product is designed exclusively for instal lation in equipment. The customer is responsible for CE conformity. 
Dynamical response
Response time     < 10 ms
Load cycle      < 10 Hz
Protection standard
IP 00
Electrical connections
3-pole plug connector RAST 2.5
Pressure connection
Pipe !à 6.2 m
Mounting instruction
 Diaphragm horizontal (Recommendation) Pressure connection and electrical connections downward
Installation arrangement
3)
  Diaphragm vertical (on request) To be agreed, signal is approx. 0.3 mbar higher than real pressure
Mounting    Snap mounting in sheet steel from 0.9 to 1.5 mm
Weight
~ 17 g
Packaging
Cardboard boxes with blister pack inserts (35 pcs)
Ordering batches quantities / Transport volumes
Pieces Execution  Length (cm) Width (cm) Height (cm) Weight (kg) Blister (35 pcs)
2520 12 boxes per Euro-pallet 120 80 93 103 72
  210   1 box   59 39 26 6.9   6

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: