Buschjost solenoid valve without differential pressure Norgren solenoid valve Series 85580
2/2-way valves DN 15 to DN 50
With inspection certificate DIN EN 10204 - 3.1
Requirements AD 2000 A4
For slightly aggressive gases and liquid fluids
Solenoid actuated, with forced lifting
Piston valves
Flange connection, pressure rating PN 40
Operating pressure 0 to 25 (40 bar)
Description (standard valve)
Solenoid valve for e.g. slightly aggressive fluids
Switching function: normally closed
Flow direction: determined
Fluid temperature: ¨C20 !aC up to max. +90
Ambient temperature: ¨C20 !aC up to max. +50
Mounting position: optional,
preferably solenoid vertical on top
Material
Body: Stainless steel (1.4408)
Seal seat: NBR
Internal parts: Stainless steel
For contaminated fluids insertion of a strainer is recommended (see B - accessories).
FeaturesHigh flow rateFor robust industry solutions Damped operation Valve operates without differential pressure Fluids of Group 1 and 2 acc. Pressure Equipment Directive 97/23/ECSuitable for supervision Systems
Characteristic data
Valves
Part Number Part Number Nominal Operating pressure * Kv-value **
Weight
3
Solenoid with 1 Solenoid with 2 Diameter (mm) min. (bar) max. (bar) (Base m
/h) (kg)
8558200.8401 8558200.8404 15 0 25 4.4 4.2
8558300.8401 8558300.8404 20 0 25 7.0 4.6
8558400.8401 8558400.8404 25 0 25 10.5 5.1
8558500.8401 8558500.8404 32 0 25 25.0 9.6
8558600.8401 8558600.8404 40 0 25 27.0 10.0
8558700.8401 8558700.8404 50 0 25 43.0 11.5
2
* for gases and liquid fluids up to 60 mm /s (cSt)
** C -value (US) P k -value x 1.2
v v
State voltage [V] and frequency [Hz]
Inspection certificate DIN EN 10204 - 3.1
Requirements AD 2000 A4 (W2 / W5 / W10)
12 57 333.0000 Material quality proof for:
- valve body, -cover, body screws acc. to DIN EN 10204 - 3.1
- material quality proof for fluid contacted parts acc. to DIN EN 10204 - 2.2
- function and leak test acc. to DIN EN 10204 - 3.1, leackage A acc. to DIN EN 12266-1
Solenoid 8401 / 8404
Further Options (Valves)
Standard voltages XXXXX01.XXXX Normally open (NO),
mounting position solenoid vertical on top
DC 1 AC 2
40 Hz - 60 Hz
XXXXX02
.XXXX Manual override
1)
XXXXX03.XXXX Seat seal FPM, fluid temperature ¨C10 !aC up to +110 !
24 V 24 V
¨ 110 V
XXXXX06.XXXX Seat seal PTFE,
1)
fluid temperature ¨C20 !aC up to +110 ! ,
¨ 120 V
leackage rate E acc.to DIN EN 12266-1;
¨ 230 V
for fluids of group 1 and 2
Design acc. to DIN VDE 0580
of the Pressure Equipment Directive 97/23/EC
Voltage range !à10
100 % duty cycle
XXXXX14
.XXXX Seat seal EPDM, for hot water,
Protection class acc. to EN 60529 IP65
fluid temperature ¨C20 !aC up to +110
Socket Form A acc. to DIN EN 175301-803
(included)
XXXXX17
.XXXX Normally open, fluid temperature ¨C10 !aC up to +110 !a
AC with rectifier plug
1)
Seat seal FPM, mounting position solenoid vertical on top
XXXXX22.XXXX max. operating pressure 40 bar
Power Consumption
According to DIN VDE 0580 at coil tempe-
XXXXX23.XXXX Elec. position indicator with two magnetic field sensors
rature
of +20 !aC. In operation the solenoid coil d-
XXXXX25.XXXX Seat seal FPM,
crease the power consumption approx. 30 %.
with larger bleed orifices in the piston,
2
for e.g. fuel and oil, max. viscosity 80 mm /s (cSt),
AC 2
1)
Solenoid DC 1
fluid temperature ¨C10 !aC up to +110 !
Inrush Holding
XXXXX47.XXXX Flanges acc.to ASME B 16.5 150 lb/sq.In.
8401 40 W
XXXXX48.XXXX Flanges acc.to ASME B 16.5 300 lb/sq.In.
8404 45 VA 45 VA
On request Further versions
Attention!
The conditions imposed on the Ex appro-
Further Options (Solenoids)
vals lead to reduction of the permissible
XXXXXXX.8441 Protection class x ll 2 GD EEx me II T3 T 140 !a
standard temperature ranges in the cases of
explosion protected solenoids.
XXXXXXX.8426
* Protection class x II 3 GD EEx nA II T4 T 135 !a
XXXXXXX.8920
Protection class x II 2 GD EEx d ll C T4 and T5
T 130 !aC / 95 !
On request Further versions
* DC only, for AC solenoids with design inspection certificate acc.to cat. 2, e.g.XXXXXXX.8441
1)
Up to max.+200 !aC fluid temperature with solenoid for higher temperature
Part Number Nominal Diameter L H F max. B
(mm) (mm) (mm) (mm) (mm)
8558200.840x 15 130 154 96 44
8558300.840x 20 150 163 110 50
8558400.840x 25 160 168 115 62
8558500.840x 32 180 184 140 92
8558600.840x 40 200 190 150 92
8558700.840x 50 230 197 165 109
Contact face acc. to DIN EN 1092-1/B
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: