Buschjost solenoid valve without differential pressure Norgren solenoid valve Series 84100/85100
2/2-way valves ND 15 to 100
for neutral gaseous and liquid fluids
Solenoid actuated, with forced lifting
Piston seat valves Publication 7502712.06.12.94
Flange connection PN 16 Catalogue index
Operating pressure 0 to 16 barA 5
85100/84100 series
Description (standard valve)
Solenoid valve for air, water and oil
Flow direction:determined
Fluid temperature:max.+90 °,
Ambient temperature:max.+50 °,
Sum of fluid- and
ambient temperature:max.+130 °,
Mounting position:optional, preferably
solenoid vertical on top,
ND 65 and larger only
vertical on top
MaterialBody:GG (Grey cast iron)
Seat seal:NBR
Internal parts:1.4104, 1.4301,
Brass, gun metal
For contaminated fluids insertion of a strainer
is recommended (see accessories).
A
Features
a
b
ab Flat piston valve Valve operates without pressure differential (? p)
P High flow rate
Switching function:
Normally closed Damped operation
Characteristic data
1)
Cat no
ND
Dimen-
Operating pressure
k -value
Weight
Section
v
sion
with gaseous and
table
liquid fluids up to
2
40 mm /s (cSt)
ValveSolenoid
ValveSolenoid
[bar]
DC
AC
3
[mm]
no
XXXXXXX.XXXX
XXXXXXX.XXXX
min. max.
(Base m /h)
[kg]
no
150165.55.00101 8510200.830185 10200.8304
2001610.05.30102 8510300.84018510300.8404
2501612.55.70103 8510400.84018510400.8404
3201627.010.50104 8510500.84018510500.8404
4001631.011.30105 8510600.84018510600.8404
5001643.013.60106 8510700.84018510700.8404
6501667.034.00207 8410800.95018410800.9504
8001694.042.00208 8410900.95018410900.9504
100016144.061.00209 8411000.95018411000.9504
Solenoids Power consumption
SolenoidDCAC
Standard
ACDC
Inrush and Holding
voltages
40 Hz to 60 Hz
830122 W(R)
8304(R)C25 V
24 V
24 V
840140 W(R)
110 V
(R)
8404(R)C45 V
230 V
205 V
950180 W(R)
9504(R)C89 V
Socket acc. to DIN 43650
Design acc. to VDE 0580
AC solenoid with rectifier.
Voltage range °?10
100 % duty cycle
1)
According to VDE 0580 at coil temperature +20 °,C
Protection class acc. to EN 60529 IP 65
In operating the solenoid coil decrease the power
(previous DIN 40050)
consumption appr. 30 %.
Attention! Restricted temperature range for
explosion proof solenoids.
For technical details see catalog register °±Solenoids°
Further models
available at extra cost
XX XXX 01.XXXX Normally open, mounting posi- XX XXX XX.8402 Solenoid for higher temperature
4)
tion solenoid vertical on top max. fluid temperature +200 °,C XX XXX 02.XXXX Manual override mounting position: vertical, with XX XXX 03.XXXX Seat seal FPM, max. fluid tem- solenoid underneath, for DC
2)
perature +110 °,C only XX XXX 06.XXXX Seat seal PTFE, max. fluid XX XXX XX.8406 Same as 8402, for AC only
2)
temperature +110 °,C XX XXX XX.8436 Solenoid in protection class XX XXX 14.XXXX Seat seal EPDM up to max. EEx me II T4
fluid temperature +110 °, XX XXX XX.8900 Solenoid in protection class XX XXX 17.XXXX Normally open, seat seal FPM, EEx de llC T4 and T5,
3)
max. fluid temperature +110 °,C up to ND 50 only
mounting position: solenoid XX XXX XX.8920 Solenoid in protection class
vertical on top EEx d llC T4 and T5,
3) XX XXX 23.XXXX Position indicator with two up to ND 50 only
solenoid switches XX XXX XX.9502 Solenoid for higher temperature XX XXX 25.XXXX Seat seal FPM with larger bleed max. fluid temperature +150 °,C
orifices in the piston (up to ND from ND 65
50), for e.g. fuel and oil, max. XX XXX XX.9540 Solenoid in protection class
2
viscosity 80 mm /s(cSt), max. EEx me ll T3 and T4,
2)
fluid temperature +110 °,C from ND 65 XX XXX 34.XXXX Enlarged closing force, advis- On request Overexcitation, Solenoid in
able at low flow rate and low protection class EEx d I,
switching cycles EEx de I, special connections On request Further versions
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
