Buschjost solenoid valve with differential pressure Norgren solenoid valve Series 85360/85370
2/2-way valves DN 8 ¨C DN 5
For neutral gases and liquids
Indirectly solenoid actuated
Piston valves
85360
Internal threads G 1/4 to G 2 or 1/4 NPT to 2 NPT
Operating pressure 0.5 to 40 bar
85370
Description (standard valve)
Solenoid valve for air, water and other neutral fluids
Switching function: normally closed
Flow direction: determined
Fluid temperature: ¨C20 !aC !- max. +90
Ambient temperature: ¨C20 !aC !- max. +50
Mounting position: optional, preferably solenoid
vertical on top
Material
Body: Brass (CW617N)
Seat seal: NBR
Internal parts: Stainless steel, Brass, PTFE / Carbon
For contaminated fluids insertion of a strainer is recommended.
FeaturesCompact build piston valveFunctional designHigh flow rateDamped operation via conePiston guided in PTFE ringsLong lifetimeSolenoid interchangeable without tools (c)
Characteristic Data
Valves
Part Number Nominal Diameter Connection Size Operating Pressure * kv-value ** Weight Total
Solenoid with 1 (mm) min. (bar) max. (bar) (Base m3/h) (kg)
8536000.9151 G 1/4
8 0.5 40 2.2 0.83
8537000.9151 1/4 NPT
8536100.9151 G 3/8
10 0.5 40 3.4 0.82
8537100.9151 3/8 NPT
8536200.9151 G 1/2
12 0.5 40 4.4 0.85
8537200.9151 1/2 NPT
8536300.9151 G 3/4
20 0.5 40 7.0 1.25
8537300.9151 3/4 NPT
8536400.9151 G 1
25 0.5 40 10.5 1.70
8537400.9151 1 NPT
8536500.9151 G 1 1/4
32 0.5 40 25.0 4.10
8537500.9151 1 1/4 NPT
8536600.9151 G 1 1/2
40 0.5 40 27.0 3.85
8537600.9151 1 1/2 NPT
8536700.9151 G 2
50 0.5 40 43.0 5.60
8537700.9151 2 NPT
* for gases and liquid fluids up to 40 mm2/s (cSt) State voltage [V] and frequency [Hz]
** C -value (US) !O -value x 1.2
v v
Solenoid 9151 Further Options (Valves)
Standard voltage XXXXX01.XXXX Normally open (NO);
up to DN 25: operating pressure 0.5 !- 35 ba
DC 1 AC 2 AC 2
from DN 32: operating pressure 0.5 !- 25 ba
50 Hz 60 Hz
XXXXX02.XXXX Manual override
24 V 24 V ¨
XXXXX03.XXXX Seat seal FPM;
¨ 110 V 120 V
fluid temperature ¨C10 !aC !- +110
¨ 230 V 220 V
XXXXX06.XXXX Seat seal PTFE,
Design acc. to DIN VDE 0580
fluid temperature ¨C10 !aC !- +110 !
Voltage range !à10
operating pressure 1!- 40 ba
100 % duty cycle
Protection class acc. to EN 60529 IP65
XXXXX14.XXXX Seat seal EPDM; for hot water.
Socket Form A acc. to DIN EN 175301-803 (included)
fluid temperature ¨C20 !aC !- +110
On request Further versions
Power Consumption
e. g. mounting bracket
According to DIN VDE 0580 at a solenoid tempera-
ture of +20 !aC. At operating state temperature the
input power of a coil decreases by up to ca. 30 % due
Further Options (Solenoids)
to physical reasons.
XXXXXXX.9176 Protection class
x II 3 G Ex nA II T4
AC 2
Solenoid DC 1
x II 3 D Ex tD A22 IP65 T 135 !a
Inrush Holding
XXXXXXX.9186 Protection class
9151 * 18 W 45 VA 35 VA
x II 2 GD EEx me II T4 T 110 !a
* r coil only
XXXXXXX.468x Protection class
x II 2 G Ex dmb IIC T4/T5
Attention!
x II 2 D Ex tD A21 IP66 T 130 !a
The conditions imposed on the Ex approvals lead to
reduction of the permissible standard temperature
up to DN 25: operating pressure 0.5 !- 16 ba
ranges in the cases of explosion protected sole-
from DN 32: operating pressure 0.5 !- 10 ba
noids.
On request Further versions
Part Number ND Connection Size ? B H H 1 L T
(mm) (mm) (mm) (mm) (mm) (mm)
8536000.9151 G 1/4
8 44 105.0 93.5 60 12
8537000.9151 1/4 NPT
8536100.9151 G 3/8
10 44 105.0 93.5 60 12
8537100.9151 3/8 NPT
8536200.9151 G 1/2
12 44 107.5 93.5 67 14
8537200.9151 1/2 NPT
8536300.9151 G 3/4
20 50 119.0 102.5 80 16
8537300.9151 3/4 NPT
8536400.9151 G 1
25 62 131.5 110.5 95 18
8537400.9151 1 NPT
8536500.9151 G 1 1/4
32 92 166.0 137.0 132 20
8537500.9151 1 1/4 NPT
8536600.9151 G 1 1/2
40 92 166.0 137.0 132 22
8537600.9151 1 1/2 NPT
8536700.9151 G 2
50 109 186.0 151.5 160 24
8537700.9151 2 NPT
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
