Buschjost solenoid valve with differential pressure Norgren solenoid valve Series 85560
Series: 84070
Description: 2/2-Way Solenoid valves
Design: With differential pressure
Connection: G 1/2 - G 3/4
Pressure: 0.3 - 10.5 bar
Material: PPO
Series: 84080
Description: 2/2-Way Solenoid valves
Design: With differential pressure
Connection: NPT 1/2 - NPT 3/4
Pressure: 0.3 - 10.5 bar
Material: PPO
Description: 2/2-Way Solenoid valves
Design: With differential pressure
Connection: G 1/2 - G 3/4
Pressure: 0.3 - 10.5 bar
Material: PPO
Series: 84080
Description: 2/2-Way Solenoid valves
Design: With differential pressure
Connection: NPT 1/2 - NPT 3/4
Pressure: 0.3 - 10.5 bar
Material: PPO
2/2-way-valves DN 15 to DN 50
For neutral gases and liquid fluids
Indirectly solenoid actuated
Piston valves
Flange connection, pressure rating PN 40
Operating pressure 0.5 to 40 bar
Description (standard valve)
Solenoid valve for air, water and other neutral fluids
Switching function: normally closed
Flow direction: determined
Fluid temperature: ¨C20 !aC up to max. +90
Ambient temperature: ¨C20 !aC up to max. +50
Mounting position: optional, preferably solenoid
vertical on top
Material
Body: Cast steel, Brass
Seat seal: NBR
Internal parts: Stainless steel, Brass, PTFE
For contaminated fluids insertion of a strainer is recommended (see B - accessories).
FeaturesCompact piston valveHigh flow rateDamped operationSolenoid interchangeable without tools (c) Fluids of Group 2 acc. Pressure Equipment Directive 97/23/EC
For neutral gases and liquid fluids
Indirectly solenoid actuated
Piston valves
Flange connection, pressure rating PN 40
Operating pressure 0.5 to 40 bar
Description (standard valve)
Solenoid valve for air, water and other neutral fluids
Switching function: normally closed
Flow direction: determined
Fluid temperature: ¨C20 !aC up to max. +90
Ambient temperature: ¨C20 !aC up to max. +50
Mounting position: optional, preferably solenoid
vertical on top
Material
Body: Cast steel, Brass
Seat seal: NBR
Internal parts: Stainless steel, Brass, PTFE
For contaminated fluids insertion of a strainer is recommended (see B - accessories).
FeaturesCompact piston valveHigh flow rateDamped operationSolenoid interchangeable without tools (c) Fluids of Group 2 acc. Pressure Equipment Directive 97/23/EC
Characteristic data
Valves
Part Number Nominal Dia- Operating pressure * k -value ** Weight
v
3
meter min. (bar) max. (bar) (Base m /h) (kg)
8556200.9151 15 0.5 40 4.4 3.2
8556300.9151 20 0.5 40 7.0 3.6
8556400.9151 25 0.5 40 10.5 4.2
8556500.9151 32 0.5 40 25.0 7.2
8556600.9151 40 0.5 40 27.0 7.6
8556700.9151 50 0.5 40 43.0 8.8
2
* for gases and liquid fluids up to 60 mm /s (cSt)
** C -value (US) P k -value x 1.2
v v
State voltage [V] and frequency [Hz]
Further Options (Valves)Solenoid 9151
XXXXX01.XXXX Normally open (NO)Standard voltages
XXXXX02.XXXX Manual override
DC 1 AC 2
50 Hz 60 Hz
XXXXX03.XXXX Seat seal FPM,
24 V 24 V ¨
fluid temperature ¨C10 !aC up to +110
¨ 110 V 120 V
XXXXX14
.XXXX Seat seal EPDM,
¨ 230 V 220 V
for hot water etc.,
fluid temperature ¨C20 !aC up to +110 !
Design acc. to DIN VDE 0580
Voltage range !à10
XXXXX47
.XXXX Flanges acc. to ASME B 16.5 150 lb/sq. In.
100 % duty cycle
XXXXX48.XXXX Flanges acc. to ASME B 16.5 300 lb/sq. In.
Protection class acc. to EN 60529 IP65
Socket Form A acc. to DIN EN 175301-803 (included)
On request further versions
Power Consumption
According to DIN VDE 0580 at coil temperature
of +20 !aC. In operation the power consumption of th
Further Options (Solenoids)
solenoid decreases by approx. 30 %.
XXXXXXX.4682 Solenoid in protection class
x II 2 GD EEx md ll C T4/T5 T 130 !a
with cable gland for DC
Solenoid
DC 1 AC 2
XXXXXXX.4683
Solenoid in protection class
Inrush Holding
x II 2 GD EEx md ll C T4/T5 T 130 !a
9151 * 18 W 45 VA 35 VA / 17 W
with cable gland for AC
Valves
Part Number Nominal Dia- Operating pressure * k -value ** Weight
v
3
meter min. (bar) max. (bar) (Base m /h) (kg)
8556200.9151 15 0.5 40 4.4 3.2
8556300.9151 20 0.5 40 7.0 3.6
8556400.9151 25 0.5 40 10.5 4.2
8556500.9151 32 0.5 40 25.0 7.2
8556600.9151 40 0.5 40 27.0 7.6
8556700.9151 50 0.5 40 43.0 8.8
2
* for gases and liquid fluids up to 60 mm /s (cSt)
** C -value (US) P k -value x 1.2
v v
State voltage [V] and frequency [Hz]
Further Options (Valves)Solenoid 9151
XXXXX01.XXXX Normally open (NO)Standard voltages
XXXXX02.XXXX Manual override
DC 1 AC 2
50 Hz 60 Hz
XXXXX03.XXXX Seat seal FPM,
24 V 24 V ¨
fluid temperature ¨C10 !aC up to +110
¨ 110 V 120 V
XXXXX14
.XXXX Seat seal EPDM,
¨ 230 V 220 V
for hot water etc.,
fluid temperature ¨C20 !aC up to +110 !
Design acc. to DIN VDE 0580
Voltage range !à10
XXXXX47
.XXXX Flanges acc. to ASME B 16.5 150 lb/sq. In.
100 % duty cycle
XXXXX48.XXXX Flanges acc. to ASME B 16.5 300 lb/sq. In.
Protection class acc. to EN 60529 IP65
Socket Form A acc. to DIN EN 175301-803 (included)
On request further versions
Power Consumption
According to DIN VDE 0580 at coil temperature
of +20 !aC. In operation the power consumption of th
Further Options (Solenoids)
solenoid decreases by approx. 30 %.
XXXXXXX.4682 Solenoid in protection class
x II 2 GD EEx md ll C T4/T5 T 130 !a
with cable gland for DC
Solenoid
DC 1 AC 2
XXXXXXX.4683
Solenoid in protection class
Inrush Holding
x II 2 GD EEx md ll C T4/T5 T 130 !a
9151 * 18 W 45 VA 35 VA / 17 W
with cable gland for AC
Part Number Nominal Dia- L H ? F max. ? B
meter (mm) (mm) (mm) (mm) (mm)
8556200.9151 15 130 96.0 96 44
8556300.9151 20 150 108.5 110 50
8556400.9151 25 160 115.0 115 62
8556500.9151 32 180 138.5 140 92
8556600.9151 40 200 143.5 150 92
8556700.9151 50 230 156.5 165 109
meter (mm) (mm) (mm) (mm) (mm)
8556200.9151 15 130 96.0 96 44
8556300.9151 20 150 108.5 110 50
8556400.9151 25 160 115.0 115 62
8556500.9151 32 180 138.5 140 92
8556600.9151 40 200 143.5 150 92
8556700.9151 50 230 156.5 165 109
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: