Nook COMMERCIAL CLEVIS TO CLEVIS ACTUATORS

Commercial Series DC Acme Screw Actuator, 24 VDC with a 20:1 Gear Ratio   The ND8 Linear Actuator is an economical, general purpose DC actuator designed for relatively light load applications. It comes equipped with an acme screw. Options are available including potentiometer and adjustable limit switches. Features Steel Extension Tube Working temperature: -25°C to +65°C Static load capacity: 4500N Powder metallurgy gears No back driving Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket ND8-24-40-A, ND8-24-20-A, ND8-24-10-A, ND8-12-40-A, ND8-12-20-A, ND8-24-40-B, ND8-24-30-B, ND8-24-20-B,  ND8-24-10-B,

The ND8 Linear Actuator is an economical, general purpose DC actuator designed for relatively light load applications. It comes equipped with either a ball screw or an acme screw. The ball screw version is equipped with a brake to prevent backdriving. Options are available including potentiometer and adjustable limit switches. Features Stainless steel extension tube High efficiency ball screw Working temperature: -25°C to +65°C Static load capacity: 13600N Powder metallurgy gears No back driving Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor

COMMERCIAL SERIES NIA5 AC ACTUATOR FEATURES The NIA5 Linear Actautor is an economical, general purpose AC actuator designed for relatively light load applications. It is designed for intermittent duty applications and has a maximum load of 3500N. It comes equipped with either a ball screw or an acme screw. The ball screw version is equipped with a brake to prevent backdriving. Options are available including potentiometer and adjustable limit switches. Features Steel Extension Tube Working temperature: -25°C to +65°C Static load capacity: 13600N Powder metallurgy gears Aluminum alloy housing Overload protection by clutch Thermal overload protection in the motor Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket

The VMD3 Linear Actuator is completely self-contained and sealed for both indoor and outdoor use. It fits into small areas without sacrificing power or reliability. The load and length configurations of the VMD3 Linear Actuator cover a diverse range of intermittent applications requiring lifting, positioning, sorting, opening, clamping, and adjusting. Features Aluminum Extension & Outer Tubes Clevis to Clevis mounting Travel: 50, 100, 150, 200, 250, 300mm Duty Cycle: 25% Environment: -26°C to + 65°C Preset Limit Switches Gear Ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Mechanical overload protection IP65 Options Potentiometer Hall Effect Sensor

Commercial Series DC Ball Screw Actuator, 12 VDC with a 20:1 Gear Ratio   The ND8 Linear Actuator is an economical, general purpose DC actuator designed for relatively light load applications. It comes equipped with a ball screw. The ball screw version is equipped with a brake to prevent backdriving. Options are available including potentiometer and adjustable limit switches. Features Stainless steel extension tube High efficiency ball screw Working temperature: -25°C to +65°C Static load capacity: 13600N Powder metallurgy gears No back driving Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket

Commercial Series DC Ball Screw Actuator, 24 VDC with a 10:1 Gear Ratio The ND8 Linear Actuator is an economical, general purpose DC actuator designed for relatively light load applications. It comes equipped with a ball screw. The ball screw version is equipped with a brake to prevent backdriving. Options are available including potentiometer and adjustable limit switches. Features Stainless steel extension tube High efficiency ball screw Working temperature: -25°C to +65°C Static load capacity: 13600N Powder metallurgy gears No back driving Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket

Commercial Series AC Ball Screw Actuator, 115 VAC/60 Hz with a 5:1 Gear Ratio   The NIA5 Linear Actautor is an economical, general purpose AC actuator designed for relatively light load applications. It is designed for intermittent duty applications and has a maximum load of 3500N. It comes equipped with a ball screw. The ball screw version is equipped with a brake to prevent backdriving. Options are available including potentiometer and adjustable limit switches. Features Steel Extension Tube Working temperature: -25°C to +65°C Static load capacity: 13600N Powder metallurgy gears Aluminum alloy housing Overload protection by clutch Thermal overload protection in the motor Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket

Commercial Series AC Acme Screw Actuator, 230 VAC/50 Hz with a 20:1 Gear Ratio   The NIA5 Linear Actautor is an economical, general purpose AC actuator designed for relatively light load applications. It is designed for intermittent duty applications and has a maximum load of 3500N. It comes equipped with an acme screw. Options are available including potentiometer and adjustable limit switches. Features Steel Extension Tube Working temperature: -25°C to +65°C Static load capacity: 4500N Powder metallurgy gears No back driving Overload protection by clutch Thermal overload protection in the motor Gear ratios: 10:1, 20:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket

Commercial Series AC Ball Screw Actuator, 230 VAC/50 Hz with a 40:1 Gear Ratio   The NIA5 Linear Actautor is an economical, general purpose AC actuator designed for relatively light load applications. It is designed for intermittent duty applications and has a maximum load of 3500N. It comes equipped with a ball screw. The ball screw version is equipped with a brake to prevent backdriving. Options are available including potentiometer and adjustable limit switches. Features Steel Extension Tube Working temperature: -25°C to +65°C Static load capacity: 13600N Powder metallurgy gears Aluminum alloy housing Overload protection by clutch Thermal overload protection in the motor Gear ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Overload protection by clutch Travel length: 100 - 600 mm Duty cycle: 25% IP65 Options Potentiometer Hall Effect Sensor Adjustable limit switches Manual drive by hand crank Optional or customized front/rear mounting bracket

Commercial Series Mini DC Acme Screw Actuator, 12 VDC with a 40:1 Gear Ratio The VMD3 Linear Actuator is completely self-contained and sealed for both indoor and outdoor use. It fits into small areas without sacrificing power or reliability. The load and length configurations of the VMD3 Linear Actuator covers a diverse range of intermittent applications requiring lifting, positioning, sorting, opening, clamping, and adjusting. Features Aluminum Extension & Outer Tubes Clevis to Clevis mounting Travel: 50, 100, 150, 200, 250, 300mm Duty Cycle: 25% Environment: -26°C to + 65°C Preset Limit Switches Gear Ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Mechanical overload protection IP65 Options Potentiometer Hall Effect Sensor

Commercial Series Mini DC Acme Screw Actuator, 24 VDC with a 20:1 Gear Ratio   The VMD3 Linear Actuator is completely self-contained and sealed for both indoor and outdoor use. It fits into small areas without sacrificing power or reliability. The load and length configurations of the VMD3 Linear Actuator covers a diverse range of intermittent applications requiring lifting, positioning, sorting, opening, clamping, and adjusting. Features Aluminum Extension & Outer Tubes Clevis to Clevis mounting Travel: 50, 100, 150, 200, 250, 300mm Duty Cycle: 25% Environment: -26°C to + 65°C Preset Limit Switches Gear Ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Mechanical overload protection IP65 Options Potentiometer Hall Effect Sensor

Commercial Series Mini DC Acme Screw Actuator, 24 VDC with a 5:1 Gear Ratio   The VMD3 Linear Actuator is completely self-contained and sealed for both indoor and outdoor use. It fits into small areas without sacrificing power or reliability. The load and length configurations of the VMD3 Linear Actuator covers a diverse range of intermittent applications requiring lifting, positioning, sorting, opening, clamping, and adjusting. Features Aluminum Extension & Outer Tubes Clevis to Clevis mounting Travel: 50, 100, 150, 200, 250, 300mm Duty Cycle: 25% Environment: -26°C to + 65°C Preset Limit Switches Gear Ratios: 5:1, 10:1, 20:1, 30:1, 40:1 Mechanical overload protection IP65 Options Potentiometer Hall Effect Sensor