Camozzi actuator
The Automation Division of Camozzi produces pneumatic components and solutions for many industries. The complete range includes cylinders, valves, FRLs, fittings, vacuum components, control cabinets and systems. The main production facilities are based in Italy with supporting plants in Russia, China, Ukraine, USA and India.
Each Camozzi facility employs only the most modern technologies along with a structured and efficient organization based on the principles of Lean Production. Our global network of branches and distributors and the local presence they provide gives confidence to a wide range of customers, from well known major users to larger OEM’s.
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for trans
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Type of construction
Rack and pinion type
Operation
spring return (single-acting), double-acting
Materials
extruded AL-profile body (pressure diecasted anodized AL body for mod. ARP400) pressure diecasted AL end caps and pistons / racks (end caps in technopolymer for mod. ARP001) zinc-plated steel pinion - POM guide parts - NBR seals
Sizes
001, 003, 005, 010, 012, 020, 035, 055, 070, 100, 150, 250, 400
Operating temperature
- 30°C ÷ 100°C
Rotation angle
90°
Type of mounting
direct to the flange of the valve through screws and bolts, or through mounting kits consisting of bracket and adaptor pin*
Operating pressure
2 ÷ 10 bar
Fluid
filtered air without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Available spare part kits
- kits which include sliding parts and seals; - kits containing springs for transforming an actuator from double-acting to single-acting with spring return.
Certification
ATEX
Showing 1 to 13 of 13 (1 Pages)
