SMC Specialty & Engineered Cylinder Designs

Series CVS1 is a double acting, single rod, valve mounted cylinder with built-in speed controller. Operation style can be changed to normally retracted or normally extended. Single, double, and 3 position solenoid valves can be installed. There are seven mounting options available for the CVS1 series and bore sizes range from 40mm to 100mm. An auto switch cylinder with the switch installed can also be manufactured.

SMC's pin clamp cylinder series C(L)KQG/P was designed with 4 body types for a broad range of installation conditions.  There are 55 types of guide pins available and an optional locking mechanism.  C(L)KQG/P series  has positioning and clamping at one time!  Precision adjustment of clamping height is possible by choosing the with-shim type.  Adjustment range: 0.5 to 3mm. Pin clamp cylinder with positioning and clamping at one time 55 types of guide pins 4 body types for a broad range of installation conditions Optional locking mechanism Precision adjustment of clamping height is possible by choosing the with shim type Adjustment range: 0.5 to 3mm

SMC's pin clamp cylinder series C(L)KQ series was designed with 4 body types for a broad range of installation conditions.  There are 55 types of guide pins available and an optional locking mechanism.  C(L)KQ series  has positioning and clamping at one time!  Precision adjustment of clamping height is possible by choosing the with-shim type.  Adjustment range: 0.5 to 3mm. Magnetic field resistant auto switch mounting type High or Low clamping heights available 29mm width Compact design makes it applicable to a broad range of workpieces Round and diamond guide pins 32mm bore size

SMC's pin clamp cylinder series C(L)KQG/P was designed with 4 body types for a broad range of installation conditions.  There are 55 types of guide pins available and an optional locking mechanism.  C(L)KQG/P series  has positioning and clamping at one time!  Precision adjustment of clamping height is possible by choosing the with-shim type.  Adjustment range: 0.5 to 3mm. Pin clamp cylinder with positioning and clamping at one time 55 types of guide pins 4 body types for a broad range of installation conditions Optional locking mechanism Precision adjustment of clamping height is possible by choosing the with shim type Adjustment range: 0.5 to 3mm

SMC's pin clamp cylinder series C(L)KQ series was designed with 4 body types for a broad range of installation conditions.  There are 55 types of guide pins available and an optional locking mechanism.  C(L)KQ series  has positioning and clamping at one time!  Precision adjustment of clamping height is possible by choosing the with-shim type.  Adjustment range: 0.5 to 3mm. Magnetic field resistant auto switch mounting type Holds a workpiece during emergency stops Plate cylinder with small auto switch Round and diamond shaped guide pins Unclamp direction locking

SMC's pin clamp cylinder series C(L)KQ series was designed with 4 body types for a broad range of installation conditions.  There are 55 types of guide pins available and an optional locking mechanism.  C(L)KQ series  has positioning and clamping at one time!  Precision adjustment of clamping height is possible by choosing the with-shim type.  Adjustment range: 0.5 to 3mm. Small auto switch mounting type Low and high clamping height options Plate cylinder type with small auto switch Round and diamond shape guide pins Lock mechanism to prevent dropping of workpiece during emergency stops

The air-hydro unit consists of a converter and a valve unit that are compactly integrated. It converts air pressure to an equivalent hydraulic pressure, and this hydraulic pressure is used for operating an actuator, thus solving the problem that is associated with the compression characteristics of air. Thus, in spite of using pneumatic equipment, it performs similarly to a hydraulic unit, operating at a consistent speed during starting or in the presence of load fluctuations, and at the same time solving the problems of sticking and slipping associated with low speed operations. This unit is ideal for achieving accurate and constant speed of the cylinder, intermediate stopping, skip movement, or for slow operation of a rotary actuator. Air-hydro unit, series CC Converter size (mm): 63, 100, 160 Small and large flow available High cylinder operation speed Air port size: 3/8 (63), 1/2 (100), 3/4 (160) Oil port size: 1/2 (63S, 100S), 3/4 (100L, 160L)

The air-hydro unit consists of a converter and a valve unit that are compactly integrated. It converts air pressure to an equivalent hydraulic pressure, and this hydraulic pressure is used for operating an actuator, thus solving the problem that is associated with the compression characteristics of air. Thus, in spite of using pneumatic equipment, it performs similarly to a hydraulic unit, operating at a consistent speed during starting or in the presence of load fluctuations, and at the same time solving the problems of sticking and slipping associated with low speed operations. This unit is ideal for achieving accurate and constant speed of the cylinder, intermediate stopping, skip movement, or for slow operation of a rotary actuator. Air-hydro converter, series CCT Converter size (mm): 63, 100, 160 Stroke range (mm): 50 to 800 Operating pressure: 0 to 0.7MPa Proof pressure: 1.05MPa Fluid: turbine oil (40 to 100cSt)

The air-hydro unit consists of a converter and a valve unit that are compactly integrated. It converts air pressure to an equivalent hydraulic pressure, and this hydraulic pressure is used for operating an actuator, thus solving the problem that is associated with the compression characteristics of air. Thus, in spite of using pneumatic equipment, it performs similarly to a hydraulic unit, operating at a consistent speed during starting or in the presence of load fluctuations, and at the same time solving the problems of sticking and slipping associated with low speed operations. This unit is ideal for achieving accurate and constant speed of the cylinder, intermediate stopping, skip movement, or for slow operation of a rotary actuator. Valve unit for series CC air-hydro unit Small and large flow available Ambient & fluid temperature: 5 to 50°C Operating pressure: 0 to 0.7MPa Proof pressure: 1.05MPa Fluid: turbine oil (40 to 100cSt)

The CE1 series is a stroke reading cylinder with position feedback. The home position can be anywhere within the cylinder stroke. Measurement is possible throughout the full stroke range. The CE1 series is offered in 6 bore sizes and is auto switch capable. Stroke reading cylinder with position feedback Resolution: 0.1mm Water resistance improved by changing sensor unit filter Power supply voltage 12 to 24V DC Numerous stroke variations Improved noise resistance Bore sizes: 12, 20, 32, 40, 50, 63

The CE2 series cylinder, through prediction control and a learning feature, is capable of highly reproducible positioning (stopping accuracy of ± 0.5mm). The brake mechanism, employing a combination spring and air pressure locking system, allows locking on either of the cylinder's reciprocating strokes. The CE2 measurement function, utilizing a magnetic scale rod and built-in detection head, provides a minimum unit of measure of 0.1mm. Brake mechanism added to stroke reading cylinder which can measure stroke length Resolution: 0.1mm Precision positioning (stopping accuracy ¹0.5mm) Prevents dropping from raised positions during intermediate stops Minimum unit of measure: 0.1mm Bore sizes: 40, 50, 63, 80, 100

The CE1 series is a stroke reading cylinder with position feedback. The home position can be anywhere within the cylinder stroke. Measurement is possible throughout the full stroke range. The CE1 series is offered in 6 bore sizes and is auto switch capable. High precision scale cylinder Resolution: 0.01mm Special scraper (IP-67) Home position can be anywhere within the cylinder stroke Auto switch capable The CE1 series is a stroke reading cylinder with position feedback. The home position can be anywhere within the cylinder stroke. Measurement is possible throughout the full stroke range. The CE1 series is offered in 6 bore sizes and is auto switch capable. Cable lengths: 5m, 10m, 15m or 20m Optional connector

The CE1 series is a stroke reading cylinder with position feedback. The home position can be anywhere within the cylinder stroke. Measurement is possible throughout the full stroke range. The CE1 series is offered in 6 bore sizes and is auto switch capable. Output terminal: 3 points DIN rail mountable Hold output, comparison output, one shot output NPN or PNP

The CE2 series cylinder, through prediction control and a learning feature, is capable of highly reproducible positioning (stopping accuracy of ± 0.5mm). The brake mechanism, employing a combination spring and air pressure locking system, allows locking on either of the cylinder's reciprocating strokes. The CE2 measurement function, utilizing a magnetic scale rod and built-in detection head, provides a minimum unit of measure of 0.1mm. DIN rail mountable NPN or PNP control output Input Signal: start, return to origin, program selection (4 bit), hold, emergency stop, input origin, automatic manual, manual: extended, retracted (2 bit), reset Output Signal: completion of positioning signal, completion to figure out origin signal, program END, abnormal signal

Series CEU5, multi counter was developed to work with CEP1 or CE1 high precision, stroke reading cylinders. CEU5 utilizes a RS-232C communication system which allows multiple counters to be linked together (each counter has a unique address, 1-99. BCD output, which allows the counter to be connected to a panel display, is available as a standard option.