SMC Specialty & Engineered Cylinder Designs
When your application requires that a task be performed that can not be completed with standard air cylinders, SMC can help you find the solution. SMC offers a variety of specialty air cylinders including Sine (smooth acceleration), Load Stopping, and Clamp to name a few. For example, the transportation of delicate items often requires greater control of cylinder speed, acceleration and deceleration than is afforded by traditional pneumatic cylinders. For this reason, SMC has developed a RE series of sine cylinders. These cylinders facilitate high-speed transportation of work but have very smooth actuation (similar to sine wave).
For your demanding applications our large engineering department can customize a product solution for you. Need a special variation on our standard pneumatic rotary actuator? No problem. We can create a three-stop rotary unit to meet your custom needs.
CH2 double acting hydraulic cylinders conform to JIS B 8367 specifications. Surge pressure generated when running into the cushion has been reduced by 30% or more compared to the CH series, due to the CH2's cushion seal system. Separate construction of the rod cover simplifies maintenance. Available in bore sizes 32mm to 100mm. All series types are available with auto switch capability with the exception of the steel tube type.
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
Tie-rod type low pressure hydraulic cylinder
Bore sizes (mm): 40, 50, 63, 80, 100, 125, 160
Standard strokes (mm): 25 to 1500
3.5MPa
8 mounting styles
Aluminum tube type is auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
JIS standard compact hydraulic cylinder
Nominal pressure: 10MPa
Bore sizes: 20~25
Mounting: basic type
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
JIS standard compact hydraulic cylinder
Nominal pressure: 10MPa
Bore sizes: 32~100
Mounting: basic type
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
JIS standard compact hydraulic cylinder
Nominal pressure: 16MPa
Bore sizes: 20~25
Mounting: basic type
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
JIS standard compact hydraulic cylinder
Nominal pressure: 16MPa
Bore sizes: 32~100
Mounting: basic type
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
Round type low pressure hydraulic cylinder
Bore sizes (mm): 20, 25, 32, 40
Standard strokes (mm): 25 to 800
3.5MPa
5 mounting types
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
Compact hydraulic, double acting single rod cylinder
Bore sizes (mm): 20, 32, 40, 50, 63, 80, 100
Stroke (mm): 5 to 100
3.5Mpa with short overall length
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
Projection area, weight, and overall length has been reduced when compared to the CH2 series
Applicable bore sizes: 40mm, 50mm, 63mm, 80mm, 100mm
Nominal pressure: 10 MPa
Available in 25mm to 1000mm strokes depending on bore size selection
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
Projection area, weight, and overall length has been reduced when compared to the CH2 series
Applicable bore sizes: 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
Nominal pressure: 16 MPa
Available in 25mm to 1000mm strokes depending on bore size selection
Auto switch capable
CH series hydraulic cylinders are available in compact, round body, JIS or tie-rod types. Nominal pressure ranges from 3.5MPa to 16MPa. Bore sizes are available, depending on the series, from 20 to 160. Auto switches are available on most models.
Nominal pressure: 7 MPa
Bore size (mm): 20,25,32,40
Equipped with cushion mechanism
Reduced cross sectional area
Lightweight with Built-in magnet
The CK1 series is a clamp cylinder available in two styles of clevis widths (16.5mm, 19.5mm). It is a non-lube, compact, lightweight cylinder with a built-in speed controller. Gaiters are unnecessary because a heavy-duty coil scraper is provided as a countermeasure against spatters. The CK1 is available in 3 bore sizes with stroke lengths up to 150mm. Options include rod attachments and auto-switch capabilities.
Two styles of clevis widths (16.5mm, 19.5mm)
Built-in speed controller
Heavy duty coil scraper
Piping entry orientation can be selected as required
Compact and lightweight
The CK1 series is a clamp cylinder available in two styles of clevis widths (16.5mm, 19.5mm). It is a non-lube, compact, lightweight cylinder with a built-in speed controller. Gaiters are unnecessary because a heavy-duty coil scraper is provided as a countermeasure against spatters. The CK1 is available in 3 bore sizes with stroke lengths up to 150mm. Options include rod attachments and auto-switch capabilities.
Two styles of clevis widths (16.5mm, 19.5mm)
Built-in speed controller
Heavy duty coil scraper
Piping entry orientation can be selected as required
Compact and lightweight
The CK1-Z series is a clamp cylinder available in two styles of clevis widths (16.5mm, 19.5mm). It is a non-lube, compact, lightweight cylinder with a built-in speed controller. The CK1-Z is available in 3 bore sizes with stroke lengths up to 150mm. Options include easy speed adjustments, rod attachments and auto-switch capabilities.
Clevis width: 16.5mm, 19.5mm
Easy speed adjustment
Piping ports are located on three surfaces
Air cushion: unclamped, head on
The CK1-Z series is a clamp cylinder available in two styles of clevis widths (16.5mm, 19.5mm). It is a non-lube, compact, lightweight cylinder with a built-in speed controller. The CK1-Z is available in 3 bore sizes with stroke lengths up to 150mm. Options include easy speed adjustments, rod attachments and auto-switch capabilities.
Clevis width: 16.5mm, 19.5mm
Easy speed adjustment
Piping ports are located on three surfaces
Air cushion: unclamped, head on
