Bimba Cylinder
Dyna-Mation DM2 cylinders are designed to generate high performance in most applications. They incorporate an extruded body design with an internal rod bearing. DM2 cylinders are better suited for wash down applications and clean environments. Mead offers a wide variety of mounting and accessory options.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 6"
Available with pneumatic end-of-stroke sensors (Inter-Pilots™)
Available with cushions for shock absorbtion
Available as double rod cylinders
Ten different mounts to choose from for most bore sizes
Cylinders are made to order, common options typically do not delay shipping
Bimba EF-I Series cylinders are compact, aluminum extruded body air cylinders. The body is anodized in a special PTFE-impregnation process that provides superior wear characteristics. With its streamlined look, low cost, and low-profile switch, it is an excellent choice for space saving machine design and is interchangeable with similar models.
Standard metric threads for ports, mounting, and rods (Specify "E" option for inch threads)
Bore sizes: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
Dimensionally interchangeable with similar compact extruded aluminum body cylinders
4301 (303) stainless steel piston rod
4 models available
Grooves in body profile for low profile switches
Bimba EF-II series cylinders are compact, non-rotating, aluminum extruded body air cylinders. Non-rotation is achieved through twin guide shafts and an anodized aluminum tooling plate with high strength stainless steel fasteners. With its streamlined look, low cost, and low-profile switch, it is an excellent choice for space saving machine design.
Standard metric threads for ports, mounting, and rods (Specify "E" option for inch threads)
Bore sizes: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
Dimensionally interchangeable with similar compact extruded aluminum body cylinders
4301 (303) stainless steel piston rod
Hard chrome plated guide shafts
X option more than doubles maximum cylinder side load and moment
The extruded flat lift table is an EF-I based guided cylinder, with four shafts for maximum rigidity. It is designed for lifting applications where other non-rotating cylinders cannot handle an overhung load and space is at a premium. It is designed to lift objects vertically, and should not be mounted horizontally or upside down.
Standard U.S. customary (inch) threads for ports, mounting, and rods
Bore sizes: 50mm, 80mm, 125mm
Four guide shafts offset loads and moments
Simple, efficient design provides economical alternative to other costly guided actuators
Convenient mounting surface provided by a wide tooling plate
Stroke lengths begin at 5mm and increase up to 100mm in 5mm increments
The Bimba EFP extruded flat multiple position cylinder is a double acting, single rod end cylinder that provides three positions in one cylinder package. This cylinder has a two piston design that saves space using the existing EF footprint and eliminates the need for an additional cylinder. This unit can help simplify machine changeovers, there-by saving costs.
Standard U.S. customary (inch) threads for ports, mounting, and rods
Bore sizes: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
Easily interchangeable to other compact extruded cylinders of the same bore size
4301 (303) stainless steel piston rod
Nitrile rod seal and wiper
Repairable and easy to maintain
The EFQ multiple-force cylinder is a double acting, single end rod cylinder that doubles the resultant force on extension. It features a two piston design that saves space using the existing EF footprint and eliminates the need for higher pressure systems or unique configurations. Only one piston is pressurized on the return stroke to save air volume and operating costs.
Standard U.S. customary (inch) threads for ports, mounting, and rods
Bore sizes: 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
Easily interchangeable to other compact extruded cylinders of the same bore size
4301 (303) stainless steel piston rod
Nitrile rod seal and wiper
Repairable and easy to maintain
Balluff's R series external transducer features the lowest profile design for space critical applications. This unique design elimates bearing wear problems associated with "rod in cylinder" designs. They are also compatible with "rod in cylinder" type linear potentiometers. Four tapped holes are all that is required to mount the transducer to the cylinder.
For TA, TD, TRA, FM, SS, MSE, MSR, Tandem, 3-Position and Double rod end models
Available for 1-1/2" to 10" bore cylinders
TRD "MPR" Magnet installed on piston
Available on ALL mounts
Pressure rated to 8700 PSI for use in hydraulic cylinders
External mount to cylinder using four tapped holes
The Bimba Extruded Linear Thruster is a rugged, guided actuator with a cylinder integral to the thruster block. The sleek body incorporates switch mounting, for a clean, space-efficient package. As strokes increase, distance between the guide shaft bearings also increase. For ET and ETD models, the maximum side load stays constant regardless of the stroke specified.
Standard U.S. customary (inch) threads for ports, mounting, and rods
Bore sizes: 12mm, 16mm, 20mm, 25mm, 32mm
Maximum operating pressure is 140 psi (10 bar)
Expected service life stretches to 1,500 miles (with filtered, lubricated air)
Temperature range is 15°F to 160°F (-10°C to 70°C)
PTFE grease used for cylinder lubrication
If your application is tight on space, a Bimba Flat-I® round body cylinder is the answer. These compact and repairable cylinders offer unequaled design, versatility and reliable performance. Many mounting and application specific options allow you to easily customize a Bimba Flat-I® cylinder to meet your application needs.
Bore sizes: 9/16", 3/4", 1-1/16", 1-1/2", 2", 2-1/2", 3", 4"
304 stainless steel body prevents corrosion
Standard oil impregnated bronze rod bushing
Stainless piston rod
Precision machined anodized aluminum heads
Several mounting options and stroke lengths available
Flat-II® cylinders are ideal in applications where rotation is prohibited and space is minimal. Non-rotation is achieved using dual piston rods and a rod end block that ensures the rods work in tandem. The Flat-II® eliminates the need for external alignment devices, such as guides, rods, and alignment posts or pins.
Bore sizes: 3/4", 1-1/16", 1-1/2", 2"
304 stainless steel body prevents corrosion
Standard oil impregnated bronze rod bushing
Stainless piston rod
Precision machined anodized aluminum heads
Maximum Pressure: 200 PSI (air only)
The Bimba multiple position FOP Flat-I® is a double acting, single rod end cylinder that provides three positions with just one cylinder. When air is supplied to Port 1, the cylinder extends to position 1. When air is supplied to Port 2, the cylinder extends to position 2. When air is supplied to Port 3, the cylinder is fully retracted.
Bore sizes: 9/16", 3/4", 1-1/16", 1-1/2", 2", 2-1/2", 3”, 4”
304 stainless steel body prevents corrosion
Standard oil impregnated bronze rod bushing
Stainless piston rod
Maximum Pressure: 200 PSI (air only)
Other positions (4, 5, etc.) are available as specials. Contact your local distributor for info.
Bimba F02, F03, and F04 series Flat-I® cylinders are double acting, single end rod cylinders that multiply the force output by supplying air to multiple pistons on extension. They save space and eliminate the need for a higher pressure system. Only one piston is powered on the return stroke, saving air volume and operating costs.
Bore sizes: 2-1/2", 3", 4"
304 stainless steel body prevents corrosion
Standard oil impregnated bronze rod bushing
Stainless piston rod
Precision machined anodized aluminum heads
Maximum Pressure: 100 PSI (air only)
FM series cylinders are one of the most versatile cylinders on the market. They feature (4) tapped holes at each end and flush sleeve nut construction at head end. FM series mounting kits convert the basic cylinder to rear pivot or flange mount, so they can be used in different applications by simply changing the mount.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6"
Interchangeable with many older style NFPA manufacturers’ cylinders out in the field
Several bolt-on NFPA mounting kits available
Flush mount feature provides most compact design available in NFPA specifications
Standard and oversized rod available
Can be converted to a Tough-Duty (TD series) design with BP and FC options
FM series rod lock cylinders give superior locking forces that are rated highest in the industry. They are designed to bolt on to the FM series cylinders, allowing for easy maintenance. Rod lock cylinders are commonly used in applications that require emergency stops (E-STOP), intermediate stroke positioning, “drop” prevention, and precise holding applications.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6"
Anodized aluminum housing and precision ground tool steel locking mechanism
Response time = 200 ms
Rod sizes: 5/8", 1", 1-3/8", 1-3/4"
Rated for millions of trouble-free rod lock actuations
Provides extremely low backlash and ZERO rod movement on actuation
Tough applications require tough cylinders. Many applications can be very abusive to equipment, which can lead to damaged components or poor performance. Steel cylinders offer the most robust solution that demanding industries require. Steel tubes have a hard chrome plated, honed I.D. and durable wall that resists impact from flying material.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
Steel cylinders can be customized with a variety of performance enhancing options
Custom designs can be engineered for challenging applications
Several paint options are available, black epoxy for indoor use is standard
Larger rod sizes are available; contact TRD for more information
