Series 41 cylinders

Series general data     Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube, zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 41M2P200A0050 Cylinders Series 41 Profile cylinders double-acting 50 200 41M2P200A0100 Cylinders Series 41 Profile cylinde

  Series general data     Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube, zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 41M2P160A0050 Cylinders Series 41 Profile cylinders double-acting 50 160 41M2P160A0100 Cylinders Series 41 Profi

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube, zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 41M2P160F0050 Cylinders Series 41 with centre trunnion Mod. F Profile cylinders with centre trunnion double-acting 50 160 41M2P160F0100 Cylinders Series 41 with centre trunn

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube, zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 41M2P200F0050 Cylinders Series 41 with centre trunnion Mod. F Profile cylinders with centre trunnion double-acting 50 200 41M2P200F0100 Cylinders Series 41 with centre trunn

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube, zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 41M6P160A0050 Cylinders Series 41 - through-rod Profile cylinders double-acting, through-rod 50 160 41M6P160A0100 Cylinders Series 41 - through-rod Profile cylinders double-acti

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B piston rod, zinc-plated steel piston rod nut, anodized AL-profile tube, zinc-plated steel tie-rods and tie-rod nuts, NBR rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (mm) Diameter (mm) 41M6P200A0050 Cylinders Series 41 - through-rod Profile cylinders double-acting, through-rod 50 200 41M6P200A0100 Cylinders Series 41 - through-rod Profile cylinders