Honeywell Solenoid valves for media up to 180 degree GK series

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems, e. g. hot water and steam. The valves require no minimum differential pressure.

Valve application	gaseous/liquid
Materials	Casing: (see below), either brass or cast iron GG25, Membrane: viton and graphit
Media temp.	0 ... 180 ^oC
Ambient temperature	0 ... 55 ^oC
Operating mode	normally closed
Power supply	230V 50Hz
Working range	0 ... 10 bar

Additional description

Other voltages are possible on request

Product Compare (0)

Honeywell Solenoid valves for media up to 180 degree GK series Flanged version GK25F

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 25 Kvs value: 10 Connections: flange Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position:

Honeywell Solenoid valves for media up to 180 degree GK series Flanged version GK32F

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 32 Kvs value: 16 Connections: flange Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position:

Honeywell Solenoid valves for media up to 180 degree GK series Flanged version GK40F

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 40 Kvs value: 16 Connections: flange Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position:

Honeywell Solenoid valves for media up to 180 degree GK series Flanged version GK50F

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 50 Kvs value: 36 Connections: flange Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position:

Honeywell Solenoid valves for media up to 180 degree GK series Screwed version GK13

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 13 Kvs value: 3.7 Connections: G1/2 Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position: A

Honeywell Solenoid valves for media up to 180 degree GK series Screwed version GK20

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 20 Kvs value: 5 Connections: G3/4 Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position: Any

Honeywell Solenoid valves for media up to 180 degree GK series Screwed version GK25

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 25 Kvs value: 10 Connections: G1 Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position: Any,

Honeywell Solenoid valves for media up to 180 degree GK series Screwed version GK32

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 32 Kvs value: 16 Connections: G1 1/4 Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position:

Honeywell Solenoid valves for media up to 180 degree GK series Screwed version GK40

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 40 Kvs value: 16 Connections: G1 1/2 Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position:

Honeywell Solenoid valves for media up to 180 degree GK series Screwed version GK50

The GK series piston-type solenoid valves are ideal for use as shutoff valves in heating and process engineering systems for neutral media such as hot water and steam. The valves require no minimum differential pressure and can open and close even without pressure or with low differential pressures. DN size mm: 50 Kvs value: 36 Connections: G2 Technical data Type:2/2-way Operating mode: normally closed Type of construction: Piston-type solenoid valve, coupled, no minimum differential pressure required. Materials: Screwed version: brass; flange version: cast iron GG 25. Sealing material: PTFE and graphite Media: Neutral media, e. g. hot water and steam. Temperature of medium: 0°C to 180°C Ambient temperature: max. 55°C. Viscosity: max. 21 mm/s Line connection: G 1 to G 2, flange for DN 25—DN 50 Operating voltages (±10%) 230 V, 50 Hz Special voltages available Voltage Code 110 VAC 2 24 VAC 8 For example: GK 20–2 (2 = 110 VAC) Duty cycle: 100% Electrical connection: Angled plug to DIN 43 650 Power consumption: Start: 100 VA; operation: 35 VA, DN 50: 30 W Degree of protection. IP 65 Mounting position: Any,

Showing 1 to 10 of 10 (1 Pages)