Honeywell Solenoid valves for hot water, steam, up to 180 degree LGK-series

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 15 Kvs value: 4 Static pressure: PN40 Working range bar: 0…20 Connections: flange Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not hang

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 20 Kvs value: 4.8 Static pressure: PN40 Working range bar: 0…20 Connections: flange Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not ha

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 25 Kvs value: 10 Static pressure: PN40 Working range bar: 0…16 Connections: flange Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not han

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 32 Kvs value: 13 Static pressure: PN40 Working range bar: 0…16 Connections: flange Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not han

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 40 Kvs value: 34 Static pressure: PN25 Working range bar: 0…12 Connections: flange Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not han

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 50 Kvs value: 40 Static pressure: PN25 Working range bar: 0…12 Connections: flange Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not han

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 15 Kvs value: 4 Static pressure: PN40 Working range bar: 0…20 Connections: G1/2 Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not hang d

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 20 Kvs value: 4.8 Static pressure: PN40 Working range bar: 0…20 Connections: G3/4 Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not hang

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 25 Kvs value: 10 Static pressure: PN40 Working range bar: 0…16 Connections: G1 Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not hang do

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 32 Kvs value: 13 Static pressure: PN40 Working range bar: 0…16 Connections: G1 1/4 Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not han

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures DN size mm: 32 Kvs value: 13 Static pressure: PN40 Working range bar: 0…16 Connections: G1 1/4 Technical data Type：2/2-way Operating mode： normally closed Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730 Type test approval mark (DIN reg. no.) see Product Summary Materials：Casing: Bronze Rg 5 to DIN 1705 Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel Sealing materials：Piston: Teflon (PTFE). Nozzle: Cone made of stainless steel. Static seal: EPDM Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not han