actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Honeywell Solenoid valves for potable water AT-series

Honeywell Solenoid valves for potable water AT-series

The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.

Valve application liquid
Materials Casing: brass Internal parts: stainless steel Membrane: EPDM
Media temp. 0 ... 120 oC
Ambient temperature -10 ... 55 oC
Operating mode normally closed
Power supply 230V 50Hz
Certificates VDE-approval according EN 60730 up to 50 degree
Working range 0 ... 10 bar
Additional description Other supply voltages are possible on request
Display: List / Grid
Show:
Sort By:
Honeywell Solenoid valves for potable water AT-series AT10
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 10 Kvs value: 1.8 Connections: G3/8 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: b

Honeywell Solenoid valves for potable water AT-series AT13
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 13 Kvs value: 3.5 Connections: G1/2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: b

Honeywell Solenoid valves for potable water AT-series AT20
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 20 Kvs value: 8.8 Connections: G3/4 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: b

Honeywell Solenoid valves for potable water AT-series AT25
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 25 Kvs value: 11 Connections: G1 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: bras

Honeywell Solenoid valves for potable water AT-series AT32
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 25 Kvs value: 11 Connections: G1 1/4 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing:

Honeywell Solenoid valves for potable water AT-series AT40
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 40 Kvs value: 30 Connections: G1 1/2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing:

Honeywell Solenoid valves for potable water AT-series AT50
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health DN Size mm: 40 Kvs value: 30 Connections: G2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: bras

Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site