Honeywell Solenoid valves for neutral liquid medium AV-series

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 10 Kvs Value: 1.8 Working range bar: -0.9…4 Connections: G3/8 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperature

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 13 Kvs Value: 3.5 Working range bar: -0.9…4 Connections: G1/2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperature

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 20 Kvs Value: 8.6 Working range bar: -0.9…10 Connections: G3/4 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperatur

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 25 Kvs Value: 11 Working range bar: -0.9…10 Connections: G1 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperature o

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 25 Kvs Value: 11 Working range bar: -0.9…10 Connections: G1 1/4 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperatu

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 40 Kvs Value: 30 Working range bar: -0.9…10 Connections: G1 1/2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperatu

This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. Solenoid valves of the AV series are approved as safety shut-off devices according to DIN EN 264 (Registration No. 5S235/2000) and are particularly suitable for use as anti-siphon valves in supply installations for light fuel oil EL. DN size mm: 40 Kvs Value: 30 Working range bar: -0.9…10 Connections: G2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Pressure range: -0.9 to 4 bar (DN 10, 13), -0.9 to 10 bar (DN 20-40), No back-pressure may occur as the valve will open in an uncontrolled manner. Materials: Casing: brass, internal parts: stainless steel Sealing material: FPM (Viton) Mounting position: Any, solenoid system preferably upright Temperature o