Buerkert valve Neutral gaseous media

3/2-way Mini Solenoid Valve  Direct-acting 1)  0 ... 10 bar  DN 1.2 mm ... DN 1.6 mm  M5, G1/8, G1/4, sub-base, banjo-bolt connection  21mm coil spacing when mounted on manifold Technical data Body material Brass, polyamide (PA), stainless steel 1.4305  Type 6012 Polyamide (PA)  Type 6012P Nickel-plated brass Banjo bolt (Type 6012P) Seal material FKM / NBR  Type 6012 / 6012P Medium   Type 6012 Neutral gases and liquids (e.g. compressed air, water, hydraulic oil, technical Vacuum)  Type 6012P neutral gases (z.B. compressed air) Medium temperature   Type 6012 -10 ... +100 !  Type 6012P -10 ... +60 ! max. +55 !C Ambient temperature  Type 6012P -10 ... +40 ! max. 21 mm2/s Viscosity Port connection M5, G1/8, Flange  Type 6012 G 1/8, G1/4 and tube  tting  6 mm  Type 6012P 24 V DC Operating voltages 24 V / 50 Hz 110 / 230 V / 50 Hz !10 Voltage tolerance 100% continuous rating Duty cycle/single valve Intermittent operation 60% (30 min)    for block assembly on With 2 W coil 100% (on request)    multiple manifold   Acc. to DIN EN

2/2-way direct acting solenoid valve  High quality seal material  Special versions up to +180oC  Impulse version optional  Threaded port and sub-base connections  Explosion proofed version optional Technical data Body material Brass, stainless steel 1.4305  Type 6013 Brass, stainless steel 1.4305  Type 6013 A FKM, PTFE/Graphite (EPDM on request) Seal material Silicon, oil and fat free version Analysis version -4 Tightness <10  mbar l/s Type 6013 A Limit value for risidual carbon <0.2 mg/dm2 Type 6013 A   Technical vacuum Medium   Neutral gases and liquids  Type 6013     (e.g. compressed air, water, hydraulic oil)   Neutral medium, which does not attack the body    Type 6013 A  and seal materials (see chemical resistance chart) Media temperature -10 to +100 !C(PA coil) till 120oC (Epoxy coil)  FKM Up to +180 oC (see chemical resistance chart)  PTFE/Graphite -10 to 100!C (AC) -10 to 120!C (D  FKM, Circuit function B Max. +55 ! Ambient temperature Max. 21 mm2/s Viscosity Port connection G1/8, G1/4, G3/8, sub-base  Type 6013 G1/8

3/2-way Solenoid Valve, direct-acting, NC or NO  Electrical connection cable plug, Form A  With or without manual override as standard  Threaded port and sub-base versions  Impulse version optional Technical data Brass or stainless steel, polyamide (sub-base) Body material FKM (EPDM on request) Seal material Neutral gases and  uids (e.g. compressed air, Medium town gas, natural gas, water, hydraulic oil, petrol).   Suitable for technical vacuum -10! to +100!C (PA coil) to 120!C Epoxy c Medium temperature  Polyamide coil (FKM seal) -10 to +55! Ambient temperature Max. 21 mm2/s Viscosity G 1/8, G 1/4, sub-base Port connection 24 V DC, 24 V/50 Hz, 230 V/50 Hz Operating voltage (other voltages on request) !10 Voltage tolerance 100% continuous rating Duty cycle / single valve Intermittent operation 60% (30 min) or  Assembly with 5 W coil (on request) Electrical connection DIN EN 175301-803 Form A for Cable Plug,Type  According to 2508 (see Ordering chart  for accessories)   As required, preferably with actuator upright Installation IP65 with Cable Plug Protection class Polyamide class B (

Compact solenoid valve, 2/2-way, G1/4 - G1/2, brass and stainless steel valve body, High pressure version up to 100 bar, high temperature version up to 180 °C 2/2-way Compact Solenoid Valve, G 1/4 - G 1/2  Direct-acting, normally closed  Brass and stainless steel body  Electrical connection cable plug Form A  High pressure version up to 100 bar  High temperature version up to +180 ! Technical data G 1/4, G 3/8, G 1/2 (NPT and RC on request) Port connection DN 2.0 - 12.0 Ori ce Brass or stainless steel 1.4404 (316L) Body material Epoxy Coil material Coil insulation class Epoxy class H FKM, PTFE/FKM and PTFE/PEEK for high temperature Seal material versions (EPDM on request) Vacuum, neutral gases and liquids (e.g. compressed air, Medium town gas, natural gas, water, hydraulic oil, petrol) and slightly aggressive medium (stainless steel version) Hot  uids and steam (only with stainless steel body)  High temperature version Medium temperature -10 to +140!  Seal material FKM, PTFE/FKM -40 to +180 !  Seal material PTFE/PEEK -10 to +55! Ambient temperature 2 max. 21 mm /s Viscosity 24 V DC, 24 V/50 Hz,

2/2- or 3/2-way- Rocker Solenoid Valve Not This  Direct acting be r by  Hermetic isolation of fluid   20 1)  Vacuum to 10 bar  Orifice 2 or 3 mm  Manual override as standard  Sub-base and threaded port version  22 mm width per station Technical data Body material PEEK and PPS G, NPT connection PPS subbase connection EPDM or FKM Seal material Resistant to neutral and slightly aggressive  uids Medium (see chemical resistance chart); technical vacuum 0 !C ... +70 ! Medium temperature 0 !C ... +60 ! Ambient temperature max. 21 mm2/s Viscosity Sub-base Port connection G 1/8 NPT 1/8 on request 24 V DC, 230 V / 50 Hz Operating voltages Other voltages on request ! 10 Voltage tolerance 5 W Power consumption 100 % continuous rating Duty cycle  Acc. to Form B industrial standard for cable plug Type 2507 Electrical connection  Rectangular plug  500mm leads on request Standard Manual override As required, preferably with actuator upright Installation IP40 Protection class 1)  Pressure values [bar]: Measured as overpressure to the atmospheric pressure Ordering chart  

3/2-way Flipper Solenoid Valve  Direct-acting  0 to 10 bar  Low power consumption  Sub-base connection  10mm width per station  Standard, EEx ia Version Technical data PPS (Polyphenylensul de) Body material FKM Seal material Compressed air lubricated, oil-free or dry; neutral Media gases and liquids (5m  ltering); technical vacuu 0 to +55! Media temperature 0 to +55!C Ambient temperature ! Brkert  an Port connection ! Lateral  ange Rectangular plug as standard; on request: Electrical connection ! Circular plug M8x 2 ! Flying lead 0.2 m , 300 mm ! Blank connector (5.08 mm Type of protection without Standard version II 2G Ex ia IIC T4 T5 T6 PTB01 ATEX 2048 Ex version IECEx PTB 07.0063 1)                         1) 24V/DC 12V/DC  on request Operating voltage Further voltages on request 2) !10  (Further voltages on request) Voltage tolerance 0.8W Nominal power Monostable Switching function Bistable (impulse) on request 100% continuous rating Duty cycle As requir

2/2-way Solenoid Valve with servo-diaphragm, G 3/8 - G 1  High flow rate  Cost effective  Low power consumption  Compact  Pressure range 0.5 up to 10 bar      Technical data Brass (DIN 50930-6) Body material PPE/PA Body cover NBR, EPDM, FKM Sealing material   Media neutral gases and  uids (e.g. compressed air, water, NBR hydraulic oil, oil, fat without additives); oil and fat-free media EPDM (e.g. alkaline washing and bleaching lyes); per-solutions, oils with additives FKM   Medium temperature 0 ... +70 ! NBR -10 ... +70 ! EPDM 0 ... +70 ! FKM max. +55 ! Ambient temperature G 3/8 ... G 1 (NPT or RC on request) Port connection 24 V DC Operating voltage 24 / 110 / 230 V / 50-60 Hz 4 W Power consumption 9 VA AC, 4 W DC (hot) 5W (cold) Inrush 6 VA AC, 4 W DC Hold !10 Voltage tolerance 100% continuous rating Duty cycle  Tag connector sidewards Electrical connection  acc. to DIN EN 175301-803*) Form C for cable plug   (on request)  acc. to DIN 43650 Form B (industrial standard) for cable   plug Type 2507 (see Ordering chart for accessories) as

2/2-way solenoid valve, pilot- controlled, for neutral liquids and gases, steam, G 1/4, G 3/8, G 1/2  High performance C small siz  High pressure version up to 40 bar  High temperature version up to 180 !  Fast-acting  ATEX version optional Technical data G 1/4, G 3/8, G 1/2 Port connections DN 6.0, DN 12.0 Ori ce Brass, Stainless steel Body material Epoxy Coil material Class H Coil insulation class Brass/Stainless steel, PEEK, PTFE carbon  lled, FKM Internal parts of valve (EPDM on request) 1.4113, 1.4303 FKM, PTFE/FKM and PTFE/PEEK for high temperature Seal material and high pressure versions (EPDM on request) Neutral gases and liquids, such as e.g. compressed air, Medium water, hydraulic oil   Steam and hot medium High temperature version 2 /sec max. 21 mm Viscosity   Medium temperature -10!C to +140 ! FKM -40!C to +180 ! PTFE/PEEK -30!C to +120 !C (on reques EPDM max. 55 ! Ambient temperature 24V DC, 24V/50Hz, 230/50Hz (others on request) Operating voltage !10 Voltage tolerance 100% continuous rating Duty cycle Tag connector acc. DIN EN 175 301-803 Form A Electrical connection for cab