actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Kaneko solenoid valve 2 way

Kaneko solenoid valve 2 way

A solenoid valve Ni-po, in one place each valve, inlet and outlet piping is used ON the road, as the valve OFF.

Therefore, most products that use fluid pressure is generally low, less liquid 1.5MPa, 0.99MPa in the gas used in the following because it is used to directly control a liquid such as water, oil, chemicals, and gases such as air and gas is.

However, in our company, depending on the caliber, such as the type of fluid, there is also a production performance of the solenoid valve that can open and close the pressure more than 10MPa.

Display: List / Grid
Show:
Sort By:
Kaneko solenoid valve 2 way  M22 SERIES
M22 SERIES Feature Since the pilot valve diaphragm and directly, you can use 0 or differential pressure. Ⅱ B + H2T6 Exd explosion-proof explosion-proof test in Japan. It is available in a hydrogen atmosphere. Mass flow rate can be obtained even in a small size.(CV value:Up to 13.0) Precautions Permissible tilt angle attachment is less than 30 degrees both left and right front and rear. Standard specification Fluid Such as water, oil, air, inert gas Working pressure Air and gas 0~0.99MPa Fluid temperature -10℃~60℃(That it does not freeze) Ambient temperature -10℃~60℃(That it does not freeze) Electrical ratings Continuity The allowable voltage fluctuation rate +10%,-15% Current value Following Table WORKING PRESSURE Insulation type H species AC DC V/Hz Start-up A Power W V Excitation A Power W 100V 50/60 0.15 16 12 1.03 18 110V 50/60 0.16 18 24 0.65 18 120V 50/60 0.17 21 48 0.33 18 200V 50/60 0.07 14 100 0.16

Kaneko solenoid valve 2 way  M30 SERIES
M30 SERIES Feature Pilot valve and main valve because it directly, you can use 0 or differential pressure. For the same seat diameter and small diameter pressure loss is known. We also manufacture certified high-pressure gas. Precautions Permissible tilt angle attachment is less than 30 degrees both left and right front and rear. Standard specification Fluid temperature Be used up to 5 ~ 200 ℃ by the internal structure Ambient temperature -20~+40℃(That the fluid does not freeze but) Fluid viscosity 250cst following Electrical ratings Continuity The allowable voltage fluctuation rate +10%,-15% Current value Following Table

Kaneko solenoid valve 2 WAY M20 SERIES
M20 SERIES Feature Mass flow rate can be obtained even in a small size. (Cv value:Up to 12.6) Mounting orientation freedom. (360 ℃) VALVE,SOLN,1/4 IN PS,48 VDC 0.15 A 7.2 W VALVE,SOLENOID: PIPE SIZE:1/4 IN; ORIFICE DIAMETER:5/16 IN; ELECTRICAL RATING:48 VDC 0.15 A 7.2 W; CONFIGURATION:4-WAY; CONNECTION:NPT; OPERATION:NO; PRESSURE RATING:1.5 TO 10 BAR; COIL:MOLDED; ENCLOSURE:EXPLOSION PROOF/WATERTIGHT; BODY MATERIAL: AL/STL; ADDITIONAL DATA: ANTI-SAND STORM, 2-POSITION, REFERENCE DWG # CS-3943AE, FOR AIR AND FLUID. KANEKO SANGYO COMPANY LIMITED: P/N#MB15G-8-DE12PU KANEKO SANGYO COMPANY LIMITED: DWG#CS-3943AE (H) KANEKO SANGYO COMPANY LIMITED: Model#MB15G-8N-DE12PU Precautions For pilot-operated, should be able to ensure minimum operating differential pressure 0.05MPa or more times. Standard specification Fluid Such as water, oil, air, inert gas Working pressure Gas 0.05~0.9MPa Liquid0.05~1.6MPa Differential pressure actuated 0.05MPa or more full-time Fluid temperature -20℃~60℃ Ambient temperature -20℃~60℃(That the fluid does not freeze but) Electrical ratings Continuit

Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site