actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Atkomatic Solenoid Valves

Atkomatic Solenoid Valves

For more than 75 years Atkomatic has been serving the fluid controls industry, manufacturing heavy-duty industrial solenoid valves.

Atkomatic solenoid valves handle the “open & close” control of gases, water, oil, steam and other clean media. Likewise, they can withstand the rigors of more demanding applications including cryogenic fluids, high pressure or super-heated steam, corrosive chemicals and more.

Because of Atkomatic’s excellent reliability and durability, you will find 6000 Series Solenoid Valves in the hydraulic-stabilizing system on the “Crawler” that transports the Space Shuttle to the launching pad at Kennedy Space Center.

35000 Series valves can be found as the emergency shut-off valves on co-generation turbine systems to assist in preventing “overspeed.”

5000 Series valves are used by stunt professionals in Hollywood, using high-pressure air to flip cars and simulate explosions in water. 4000 Series solenoid valves are employed in boiler and steam systems in schools, municipal buildings, commercial and industrial facilities throughout the world.

Display: List / Grid
Show:
Sort By:
Atkomatic Circle Seal Solenoid Valves SV10-SV30 Series Item # SV10A2NO4P44
Features Zero Leakage Bi-directional flow Versatile : 3-way 2-position, 2-way normally closed, or 2-way normally open Balanced poppet design 303 stainless steel, brass or aluminum construction Minimum current required Rapid response Explosion-proof per MIL-STD-810B High pressure Direct acting Medium flow capacity Specifications   Series SV1 Body Material Aluminum Alloy Operating Pressure 3000 psig Valve Type 2-way, normally open Operating Temperature -65 to 165 ºF Nominal Coil Voltage & Current 28 VDC Port Size 1/4 in Port Type Female Pipe Flow Coefficient (Cv) 0.096 Seal Material Buna N Optional Seal Material Ethylene Propylene Neoprene

Atkomatic Circle Seal Solenoid Valves SV400 Series Item # SV431A2NO6P33
Features Zero Leakage Bi-directional flow Versatile : 3-way 2-position, 2-way normally closed, or 2-way normally open Balanced poppet design 303 stainless steel, brass or aluminum construction Minimum current required Rapid response Explosion-proof per MIL-STD-810B High pressure Direct acting Medium flow capacity Specifications   Series SV43 Body Material Aluminum Alloy Operating Pressure 3000 psig Valve Type 2-way, normally open Operating Temperature -65 to 160 ºF Nominal Coil Voltage & Current 28 VDC Port Size 3/8 in Port Type Female Pipe Flow Coefficient (Cv) 0.86 Seal Material Viton® Optional Seal Material Buna N (standard) Ethylene Prop

Atkomatic Solenoid Valves 15400 Series Solenoid Valves Item # 15400-300BPFAA1S
Bronze, Semi-direct Lift, Pressure 0 to 300 psig (21 bar) Low Pressure Valve Configurable for Variety of Fluid Applications Features Semi-direct lift action for operation down to zero pressure differential Operation up to 300 psi (21 bar) Bronze valve material (naval M bronze) Available normally closed or normally open Media temperatures from - 423º F to +500º F (-253º C to +260º C) Will handle fluids with viscosity up to 150 SUS Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and fluid not harmful to bronze Optional seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or metal (316 stainless steel pilot and/ or brass piston seat) depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR Pipe sizes from 1/4" through 1 1/2" NPT British BSPT ports are available Full ported valves: Cv from 1.1 through 21.5 Coil housings available in NEMA 1 (standard), NEMA 4 (waterproof), NEMA 7 (explosion-proof for hazardous locations), and combination NEMA 4 & 7 Manual opening and throttling devices are available as options Valve position indicator opti

Atkomatic Solenoid Valves 15800 Series Solenoid Valves Item # 15800-300HPDAA4S
Stainless Steel, Semi-direct Lift, Pressure 0 to 1500 psig (104 bar) Medium Pressure Valve Configurable for Variety of Fluid Applications Features Stainless steel construction on all wetted parts: 316 for barstock parts and CF8M for cast parts. Plunger material is 416 stainless that is treated for increased corrosion resistance Semi-direct lift action for operation down to zero pressure differential Normally closed operation Operation up to 1500 psi (104 bar) Media temperatures from - 423º F to +500º F (-253º C to +260º C) Will handle fluids with viscosity up to 150 SUS Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and corrosive fluids Optional pilot and piston seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or 316 stainless steel depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR Pipe sizes from 1/4" through 1" NPT British BSPT ports are available Full ported valves: Cv from 1.1 through 12.5 Removable 316 stainless steel body inserts (stainless steel trim) Class H coils standard Coil housings available in NEMA 1 (standard)

Atkomatic Solenoid Valves 30400 Series Solenoid Valves Item # 31400-200PDAA4S
Bronze, Semi-direct Lift, Pressure 0 to 1500 psig (104 bar) Medium Pressure Valve, Configurable for a Variety of Fluid Applications Features Semi-direct lift action for operation down to zero pressure differential Operation up to 1500 psig (104 bar) Media temperatures from - 423º F to +500º F (-253º C to +260º C) Will handle fluids with viscosity up to 150 SUS Bronze valve material (naval M bronze) Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and fluids not harmful to bronze Heaviest duty and most rugged construction Optional seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or metal (316 stainless steel pilot and/ or brass piston seat) depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR Removable 316 stainless steel body inserts (stainless steel trim) Available in normally closed configuration from 1/4" to 3" NPT ports Available in normally open configuration from 1/4" to 1 1/2" NPT ports British BSPT ports available Full ported valves Normally closed Cv from 2.7 to 71 Normally open Cv from 2.7 to 21 Class H coils are stan

Atkomatic Solenoid Valves 30800 Series Solenoid Valves Item # 31800-200PMAA1S
Stainless Steel, Semi-direct Lift, Pressure 0 to 3000 psig (207 bar) High Pressure Valve Configurable for a Variety of Fluid Applications Features Stainless steel construction on all wetted parts: 316 for machined parts and CF8M for cast parts Plunger material is 416 stainless that is treated for increased corrosion resistance Semi-direct lift action for operation down to zero pressure differential Operation up to 3000 psig (207 bar) Media temperatures from - 423º F to +500º F (-253º C to +260º C) Will handle fluids with viscosity up to 150 SUS Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and corrosive fluids Optional seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or metal (316 pilot seat and/or 316 piston seat) depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR Heaviest duty and most rugged construction Removable 316 stainless steel body inserts (stainless steel trim) Available in normally closed configuration from 1/4" to 2" ports Available in normally open configuration from 1/4"to 1 1/2" ports British BSPT ports are avail

Atkomatic Solenoid Valves 4000/5000 Series Solenoid Valves Item # 4008-300PIAA1S
Bronze, Pilot-piston, Pressure 5 to 500 psig (0.4 to 34.5 bar) Medium Pressure Valve Configurable for Variety of Fluid Applications Features Pressures to 500 psig (0.4 to 34.5 bar) Full ported valves Pilot operated: require a minimum pressure differential of 5 psig (0.4 bar) For use with any gas or liquid (max. viscosity of 200 SSU), including steam and cryogenics, that is not harmful to bronze Pipe sizes of 1/4" through 1 1/2" NPT for 4000 Series and 2" through 3" NPT in 5000 Series (British BSPT ports available) Cv from 1.4 to 71 Available in normally open and normally closed versions Fluid temperatures from -423°F to +500°F (-253°Cto +260°C) Optional seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or metal (316 stainless steel pilot and/or brass piston seat) depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR. Bronze valve material (naval M Bronze) Removable 316 stainless steel body inserts (stainless steel trim) 4000 Series only Coil housings available in NEMA 1 (standard), NEMA 4 (waterproof), NEMA 7 (explosion-proof for hazardous locations), and combination NEMA 4 & 7 Manual opening and thro

Atkomatic Solenoid Valves 6000 Series Solenoid Valves Item # 6000-300BPMAA1S
Bronze, Pilot-piston, Pressure 0 to 1500 psig (0.4 to 103.5 bar) Medium Pressure Valve Configurable for Variety of Fluid Applications Features Pressures to 1500 psig (103.5 bar) Pilot operated: require a minimum pressure differential of 5 psig (0.4 bar) Full ported valves Fluid temperatures from - 423º F to +500º F (-253º C to +260ºC) For use with any gas or liquid (max. viscosity of 200 SSU), including steam and cryogenic, that is not harmful to bronze Pipe sizes of 1/4" through 1 1/2" (British BSPT ports available) Cv from 1.4 to 21 Available in normally open and normally closed versions Optional pilot & piston seat seal materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or metal (316 stainless steel pilot & brass piston seat) depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR. Bronze valve material (naval M bronze) Removable 316 stainless steel body inserts (stainless steel trim) Coil housings available in NEMA 1 (standard), NEMA 4 (waterproof), NEMA 7 (explosion-proof for hazardous locations), and combination NEMA 4 & 7 Manual opening and throttling devices are available as options Class B

Atkomatic Solenoid Valves 8000 Series Solenoid Valves Item # 8000-300PLAA1S
  Stainless Steel, Pilot-piston, Pressure 5 to 4000 psig (0.4 to 276 bar) High Pressure Valve Configurable for Variety of Fluid Applications Features Pressure to 4000 psig depending on fluid and coil type (276 bar) Pilot operated: require a minimum pressure differential of 5 psig (0.4 bar) Full ported valves Available in normally open and normally closed versions Fluid temperatures of - 423º F (-253º C) through +500º F (+260º C) Stainless steel construction on all wetted parts - 316 for machined parts and CF8M for cast parts. Plunger material is 416 stainless that is treated for increased corrosion resistance Will handle fluids with viscosity up to 200 SUS Suitable for use with wide variety of fluid including: air, gasses, liquids, hydraulic fluids, steam, cryogenic fluids, and corrosive fluids Removable 316 stainless steel body inserts (stainless steel trim) Optional pilot and piston seat materials of Teflon®, PCTFE, Buna N, Viton®, EPR, or 316 stainless steel depending on fluid type and pressure Body seal materials of Teflon®, Viton®, Buna N, or EPR Pipe ports of 1/4", through 2" NPT (1 1/2" max. in 4000 psig (276 bar) version); British BSPT

Atkomatic Solenoid Valves HS Series Solenoid Valves Item # HS200-10P
Bronze, Pilot-piston, Pressure 5 to 125 psig (0.4 to 9 bar) Steam or Hot Water Value Features Pressures to 125 psig (9 bar) saturated steam temperature of 352°F (178°C) Pipe sizes from 1/4" through 1 1/2" (British BSPT ports available) Full ported valves: Cv from 1.4 to 21 Pilot operated: require a minimum pressure differential of 5 psig (0.4 bar) Bronze valve material (naval M Bronze) Metal to metal pilot seat, Teflon® piston seat and Teflon® body o-ring seal Class H coil is standard Treated 416 stainless steel plunger material for increased corrosion resistance No other options available Specifications   Series HS Body Material Bronze Position of Valve (DE-Energized) Normally Closed Connection Size 1/4 in Connection Type Female NPT Fluid Media Type Steam or Hot Water Operating Pressure 5 to 125 psig 0.4 to 9 bar

Atkomatic Solenoid Valves JJ Series Solenoid Valves Item # JJ200-30BP
Bronze, Pilot-piston, Pressure 5 to 250 psig (0.4 to 17 bar) General Purpose Air, Water, and Light Oil (150 SSU max.) Value. Features Pressures to 250 psig (17 bar) Fluid temperatures from -65° F to +180° F (-54° C to +82° C) Pipe sizes from 1/4" through 2" (British BSPT ports available) Full ported valves: Cv from 1.4 to 46 Pilot operated: require a minimum pressure differential of 5 psig Bronze or brass valve material Buna N pilot seat, piston seat, and body o-ring seals Class B and class H coils are available Coil housing - NEMA 1 Treated 416 stainless steel plunger material for increased corrosion resistance Specifications   Series JJ Body Material Bronze Position of Valve (DE-Energized) Normally Closed Connection Size 1/4 in Connection Type Female NPT Fluid Media Type General Purpose Operating Pressure1 5 to 250 psi

Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site