actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

AMETEK pressure transmitter

AMETEK pressure transmitter
About U.S. Gauge AMETEK - U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure and temperature measurement products. Founded in 1904, USG's product offering includes bourdon tube and diaphragm capsule pressure gauges ranging in size from 1-1/2 inches to 6 inches; with brass, stainless steel, or Monel internals. Other products include a complete line of diaphragm seals, a full range of bimetallic thermometers from 1 inch to 5 inches in diameter, and thermowells. About U.S. Gauge, PMT Products For 100 years, the process industries have relied on U.S. Gauge for accurate and reliable pressure measurements. For over 30 years at PMT Products we have built on this experience and developed a full line of precision electronic pressure transducers and transmitters. This Pressure Measurement Technology group has developed a variety of pressure transducer and transmitter types and sizes. These are used in test and measurement, industrial, medical, agricultural, military, and automotive applications. PMT Product transducers and transmitters are available in pressure ranges from 1 to 6000 psi with gauge, vacuum compound, absolute or sealed reference. All are temperature and pressure compensated. AMETEK transducers and transmitters are available in low cost, fixed range as well as full featured, field adjustable models with 5:1 span turndown. Process or flush mount connections and CSA, FM and CENELEC approvals are available.
Display: List / Grid
Show:
Sort By:
AMETEK pressure transmitter Model 742
Description Model 742 Pressure Transducer (General Information): The 742 Pressure Transducer has been specially designed to meet the needs of military and/or marine applications and conforms to military specification MIL-T-24742 (SH). The 742 accurately measures pressure and transmits a fully adjustable 4 to 20 mA or 0-5 VDC output signal for remote display, recording, or control. Model 742R Gage Pressure Version: The 742R is available in gauge, compound, vacuum and absolute ranges from 30鈥滺g vacuum to 0-10,000 psi. Model 742D Differential Pressure Version: The 742D is available in differential ranges from 10 inches of water to 600 psi. Direct Replacement The 742D transducer is directly interchangeable with existing pressure transducers designed to MIL-T-24742. The mounting is designed to match the footprint of existing transducers for quick and easy installation. Minimal Maintenance Calibration is quick and easy with the non-interacting zero and span adjustments.   Specifications   Functional Specifications  in accordance with MIL-T-24742 (SH) Applications

AMETEK pressure transmitter Model 831
The Model 831 transmitters are the most durable, accurate and cost effective fixed range pressure transmitter available. An all 316 stainless steel transmitter, it is designed for years of stable performance in even the toughest environmental and corrosive media conditions. With its all-welded construction, this transmitter is weatherproof and capable of a direct spray with forces up to 200 psi without internal leakage. The Model 831 (standard and low power) has FM and CSA explosion-proof ratings. The 831D (differential pressure) also carries the CSA explosion-proof rating. All Model 831s meet NACE standards for offshore applications. A one year warranty is standard with every unit. The small size and light weight of the Model 831 transmitter eliminates the need for complicated mounting hardware and mechanical supports, thereby substantially reducing installation time. The in-line connection permits simple field wiring without the need for additional hardware, adding to the speed and ease of installation. The standard Model 831 and the Model 831D feature a 4 to 20 mA output standard with a 12 to 30 VDC power supply. The Model 831 Low Power provides a three wire 1-5 or 0.8-3.2

AMETEK pressure transmitter Model 851
Description  The Model 851 is designed for years of stable performance in even the toughest environmental and media conditions, such as refineries, petrochemical facilities, paper & pulp plants, and waste water treatment facilities. Approvals include FM and CSA for explosion-proof and CSA for intrinsic safety ratings. The Model 851 also meets NACE standards for offshore applications. A one year warranty is standard with every unit. The small size and light weight of the Model 851 transmitter eliminates the need for complicated mounting hardware and mechanical supports, thereby reducing installation time substantially. The in-line connection permits simple fi eld wiring without the need for additional hardware, adding to the speed and ease of installation. Its slim profi le allows for mounting in places too tight for most other transmitters. A 4-20 mA output is standard with a 12-40 VDC power supply. The Model 851 is bench adjustable, allowing for calibration of zero and span. With the cover sealed double O-ring assembly, this transmitter is weather proof and capable of direct spray, clean-in-place applications.    

AMETEK pressure transmitter Model 88
Description Standard Version (Model 88C): A full-featured, all stainless steel transmitter, Model 88 is designed for years of stable performance in even the toughest environmental and media conditions. Approvals include FM and CSA for explosion-proof and CSA for intrinsic safety ratings. The Model 88 also meets NACE standards for offshore applications. A five year warranty is standard for the 88C. The small size and light weight of the Model 88 Transmitter eliminates the need for complicated mounting hardware and mechanical supports, thereby reducing installation time substantially. The integral junction box permits simple field wiring without the need for additional hardware, adding to the speed and ease of installation. An amplifier PCB enclosed in a sealed chamber is used to convert the millivolt signal from the sensor to a calibrated 4 to 20 mA transmitter output. Feedthroughs for EMI and RF protection are used between the amplifier board and the terminal housing. A 4 to 20 mA output is standard with a 12 to 40 VDC power supply. With all 316 stainless steel welded construction, the Model 88 is compatible with corrosive media and hazardous environme

AMETEK pressure transmitter Model 89
Description  Model 89 Pressure Transducer (General Information): The Model 89 pressure transducer has been specially designed to meet the needs of military and/or marine applications and conforms to military specifications. The Model 89 accurately measures pressures and transmits a fully adjustable 4-20 mA output signal for remote display, recording or control. The Model 89 is available in gage, compound, vacuum and absolute ranges from 30鈥滺g vacuum to 0-6000 psi and differential pressures from 300 inch wtr to 400 psi. Model 89 Gage Pressure Version, QPL-MIL-R-24212C (SH) Available in gauge, compound, vacuum and absolute ranges from 30鈥滺g vacuum to 0-6,000 psi. Model 89 Differential Pressure Version, QPL-MIL-D-24304B (SH) Available in differential ranges from 300 inches of water to 400 psi. Direct Replacement The Model 89 transducer is directly interchangeable with existing pressure transducers designed to MIL-Standards. The mounting is designed to match the footprint of existing transducers for quick and easy installation. Minimal Maintenance Calibration is quick and easy with the non-interac

AMETEK pressure transmitter Model ACT
Description The Model ACT builds upon the successful DCT product line by offering an Analog Compensated Transducer with 0 to 100mV output. The Model ACT is ideal for OEM customers that desire high-speed differential outputs into their control system. The Model ACT is available in brass and stainless steel. This product is offered in a variety of mounting options, stainless steel or brass construction, and numerous pressure ranges. It is fully compensated for the ef- fects of pressure and temperature change and calibrated to produce industry standard electrical outputs. The ACT accepts both regulated and pulsed excitation voltages and provides output signals such as 0 to 100mV. The ACT Transducer is offered in pressure ranges from 1 psi up to and including 3000 psi. The Model ACT is extremely accurate, less than 卤0.3% full scale over pressure. The universal design incorporates a stainless steel isolation diaphragm and 316 stainless steel construction for use with most media types. An economical non-isolated brass transducer, used for clean, dry media is also available. The ACT offers premium performance and versatility of use for many

AMETEK pressure transmitter Model DCT
Description The Model DCT Pressure Transducer is designed for general industrial and commercial requirements offering excellent performance over a wide range of applications. This model is based on proven micro-machined silicon technology providing high reliability, long-term stability, and low cost relative to competing technologies. AMETEK has been developing and manufacturing high performance pressure sensing products for nearly 100 years, and the DCT brings a new level of accuracy to the AMETEK product portfolio. This product is offered in a variety of mounting and electrical output options, stainless steel or brass construction, and numerous pressure ranges. It is fully digitally compensated for the effects of pressure and temperature change and calibrated to produce industry standard electrical outputs. The DCT accepts both unregulated and regulated excitation voltages and pro- vides output signals such as 1 to 5 VDC, 1 to 6 VDC, 0 to 5 VDC, 0.5 to 4.5 VDC ratiometric and 4 to 20mA. The DCT Transducer is offered in pressure ranges from 1 psi up to and including 3000 psi. The Model DCT is extremely accurate, less than 卤0.3% full scale over pre

AMETEK pressure transmitter Model IND-100
Description The Model IND-100 Pressure Transmitter has been designed for use in a variety of industrial applications such as plant process and utility pressure measurements, compressor control, and hydraulic and pneumatic manufacturing systems. The AMETEK IND-100 offers exceptional reliability in industrial as well as outdoor environments. It provides unequaled performance and is perfectly suited for the demanding price requirements of this market. EMI/RFI resistance is critical and is provided on the AMETEK IND-100 Transmitter as protection against noise-generating variable speed motors and radio equipment that is common on the factory fl oor. In addition, all AMETEK transmitters are thermally compensated over a wide temperature range to handle outdoor environments. AMETEK utilizes the most stable sensor available for IND-100 transmitters, sputtered METAL THIN FILM technology. The wetted surfaces are 316L, and Hastelloy. The circuits are isolated from external interference with RFI/EMI fi lters and a power limiting circuit which has been agency approved to meet Class I, Div. 1 intrinsic safety standards. IND-100 transmitters with pigtail connectors

AMETEK pressure transmitter Model LMA
Description Lightning protection units are available to help protect your AMETEK U.S. Gauge, PMT Products Level Measurement System from unexpected lightning and secondary surges. These high performance LP units are easy to install, are maintenance-free and respond in less than one nanosecond. When placed at the meter and at the transmitter, they defend against powerful surges on both the signal and power lines. If a surge should occur, the LP unit will clamp the circuit, preventing excessive voltage from damaging your sensitive equipment. This saves you replacement and downtime costs. Features Protection for the LevelMate, Model DMC Meter, Model SST, and Model 575 Transmitters Nanosecond, bipolar response AC and DC protection available Powerful surge protection Small, compact size New or existing installation Enhances system integrity Reduces downtime Maintenance free

AMETEK pressure transmitter Model SPT
Description The Model SPT general purpose industrial pressure transducer is designed for use in a variety of industries. Providing excellent media compatibility with all 316 stainless steel wetted parts, it is perfectly suited for applications where media compatibility is a problem. With its superb stability, low cost and proven reliability, it is ideal for OEM applications. This model provides a high level voltage output from an unregulated supply. Each unit is shipped fully compensated for pressure and temperature and is completely interchangeable without the need for further calibrations. The SPT features a solid state silicon piezoresistive sensing element, electrostatically bonded to glass to virtually eliminate the effects of induced stress and vibration. Behind every SPT series transducer is over 15 years of stainless steel/oil isolation technology. The silicon sensor is completely isolated via an oil- filled chamber. The transducer has a computer-controlled laser trimmed custom hybrid circuit which standardizes output and provides precise temperature and pressure compensation. Rugged construction and a standard Packard electrical connector

AMETEK pressure transmitter Sta-Kool Cooling Element
Description  Extreme process temperature reduces the accuracy, reliability, durability, and the overall life of a pressure gauge. The AMETEK U.S. Gauge (USG) Sta-Kool鈩 cooling element was designed for pressure measurements with this extremely high temperature environment in mind.  Under actual laboratory testing condition, in still room air, the 316L stainless steel Sta-Kool鈩 cooling element was able to reduce 400掳F (204掳C) liquid process temperature down to 100掳F (38掳C) at the active portion of the Bourdon tube (see chart 1 on next page). AMETEK USG recommends using a Sta-Kool鈩, capillary or diaphragm seal to protect pressure gauges, pressure transmitters or pressure switches (not supplied by USG) from process temperatures exceeding 190潞F. Anything exceeding 190潞F will start to degrade weld joints and electronics. The Sta-Kool鈩 can be either threaded or welded (to eliminate a potential leak path) to any pressure gauge with 1/2" NPT male connection made out of compatible material. Furthermore, the Sta-Kool鈩 cooling element can be attached in between a pressure gauge and diaphragm seal for the most comprehensive process measurement

Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site