JUMO pressure transmitter

Features Measuring ranges: 0 to 250 mbar up to 0 to 600 bar relative pressure, 0 to 1 bar up to 0 to 25 bar absolute pressure Linearized and temperature-compensated measuring range Measuring principle: piezoresistive or thin-film (strain gauge) Stainless steel measuring cell, fully welded Temperature of medium: -40 to +125 Â°C Optional high-temperature version up to 200 Â°C (SIP and CIP compatible) Measured values transmitted in any units to the CANopen bus Protection type: IP67 Customer benefits Robust to withstand high mechanical loads Excellent process reliability is guaranteed by the combination of protection type IP67, a high level of vibration resistance, parts in contact with media that are made of stainless steel, and a front flush, welded system.     Compact and economical The small dimensions (Ø 27 mm Ã— 65 mm) allow a flexible installation position with simple wiring and assembly, while optimizing use of materials. Uniform parameterization and diagnosis of the entire CAN bus system down to the sensor level results in savings during startup and maintenance.  &n

Features Measuring ranges: 0 to 1.6 bar up to 0 to 100 bar relative pressure Linearized and temperature-compensated measuring ranges Measuring principle: aluminum oxide ceramic thick-film sensor Elastomer-sealed Temperature of medium: -20 to +85 Â°C Measured values transmitted in any units to the CANopen bus Protection type: IP67 Customer benefits Robust to withstand high mechanical loads Excellent process reliability is guaranteed by the combination of protection type IP67, a high level of vibration resistance, parts in contact with media that are made of stainless steel, and a front flush, welded system. The capacitive ceramic measuring cell made from aluminum oxide (99.9 %) has long-term stability and a high level of overload protection.    Compact and economical The small dimensions (Ø 27 mm Ã— 65 mm) allow a flexible installation position with simple wiring and assembly, while optimizing use of materials. Uniform parameterization and diagnosis of the entire CAN bus system down to the sensor level results in savings during startup and maintenance.   Process reliability Redundant

Features Measuring ranges: 0 to 250 mbar up to 0 to 400 bar relative pressure, 0 to 600 mbar up to 0 to 25 bar absolute pressure Linearized and temperature-compensated measuring ranges Measuring principle: piezoresistive or thin-film (strain gauge) Stainless steel measuring cell, fully welded (no seals) Integrated temperature sensor: PT1000 Temperature of medium: -50 to +125 Â°C Measured values transmitted in any units to the CANopen bus Protection type: IP67 Customer benefits Robust to withstand high mechanical loads Excellent process reliability is guaranteed by the combination of protection type IP67, a high level of vibration resistance, parts in contact with media that are made of stainless steel, and a front flush, welded system. The stainless steel measuring cell is safe and reliable due to its long-term stability and high overload resistance.    Compact and economical The small dimensions (Ø 27 mm Ã— 65 mm) allow a flexible installation position with simple wiring and assembly, while optimizing use of materials. Uniform parameterization and diagnosis of the entire CAN bus system

Features 0 – 160 bar to 0 – 600 bar relative Measuring range scaling 1:4 Process-reliability accuracy from 0.15 % of the nominal-value range setpoint value Analog output can be freely configured by the user Time-saving and simple configuration on the device or with easy-to-use setup program Large, vibrant display Flexible installation position through display (180°) rotation and subsequent auto-zero Rotating case for better readability (+/-160°) Product is not intended for export to the USA. Customer benefits Process reliability The stainless steel sensor welded to the process connection has high bursting safety, equivalent in part to 5 times the measuring range. Consequently, the plant is reliably protected against medium leaks in the event of malfunction. Uncomplicated and time-saving The measuring device can be configured easily to save time, either on site or using an easy-to-use setup program. Flexible To optimize legibility, configuration, electrical installation, and the implementation of auto-zero, the case of the measuring device can be adjusted by +/-160° and the display by 180° in a user-friendly

Features 0 - 400 mbar to 0 - 60 bar relative / absolute Measuring range scaling 1:4 Process-reliability accuracy as of 0.1 % of the nominal-value range end value Analog output can be configured by the user Time saving and simple configuration at the device or through a convenient setup program Large, vibrant display Flexible installation position through turning of the display (180°) and subsequent auto-zero Turnable case for better readability (+/-160°) Options available for high medium temperatures up to 200 °C (SIP and CIP compatible) EHEDG-certified with JUMO PEKA process connection, type 409711 (hygienic design), made out of stainless steel Customer benefits Process reliability A hygienic design, parts that are in contact with the media being made of stainless steel, and a cavity-free system prevent microbial contamination and therefore guarantee maximum process reliability for hygienic processes. Uncomplicated and time-saving The measuring device can be configured easily to save time, either on site or through a convenient setup program. Flexible To optimize legibility, configuration, electrical installation, and the implementatio

Features Measuring ranges: up to 150mbar Medium temperature: -15...+70 °C Components coming into contact with the pressure medium are made of polycarbonate Protection class: IP 54 IEC 529 (EN 60529), protection insulated EC design test certificate as per EC gas appliances directive EC design test certificate as per EC pressure equipment directive TüV inspection as pressure monitors of a special design as per TRD 604 and VdTüV identification sheet Pressure 100/1, as well as Class "S" as per EN 1854 Applications Differential pressure monitoring in Fuel technology Ventilation technology Air conditioning technology Filter technology Suitable for air, smoke and flue gas and other non-aggressive gasses as a differential pressure monitor Not suitable for technical combustion gasses The differential pressure monitor of type 4 ADS-82 is suitable to switch a current circuit ON, OFF or change it over, when the actual pressure value changes in relation to the setpoint value. The setpoint value (switching point) is manually set at a setting dial with scale. When the setpoint value is exceeded or fallen below, the current circuit is s

Features Measuring ranges: -100 to +100 mbar up to -1 to +25 bar relative, 0 to 600 mbar to 0 to 25 bar absolute For relative pressure, absolute pressure, and filling level Impervious to aggressive and abrasive gases, vapors, and liquids Temperature of medium: -40 to +120 Â°C Linearity: ≤ 0.1 % of end value Excellent long-term stability of < 0.1 % per year Excellent temperature compensation Operation on site or using HART protocol Signaling if the measuring range is exceeded or not met and in the event of sensor exceedance and sensor faults Visible on the display   Pressure in 13 different units; measured value in % or scaled with a choice of measuring unit Output current in mA Sensor temperature in °C or °F Measured value error, measured value outside of measuring range Minimum pressure and maximum pressure (drag indicator) Pressure and sensor temperature can be displayed simultaneously Settings via the operating keys Zero point correction Start and end of measuring without pressure specification (blind setting) or with pressure specification: simple, time-saving, conveni

Features Measuring ranges: 0 - 60 mbar DP to 0 - 25 bar DP For differential pressure, filling level, and flow For non-aggressive and aggressive gases, vapors, and liquids Temperature of medium: -40 to +100 °C Linearity: ≤ 0.1 % of end value Excellent long-term stability of < 0.1 % per year Load on one and both sides up to a static pressure of 160 bar; up to 420 bar as an option Excellent temperature compensation Operation on site or using HART protocol Signaling occurs if the measuring range is exceeded or not met; signaling also occurs in the event of sensor exceedance and sensor faults Accessories: pressure separator, valves, setup program ATEX approval available as an option Display on the display   Pressure in 13 different units; measured value in % or scaled with a choice of measuring unit Output current in mA Sensor temperature in °C or °F Measured value error, measured value outside of measuring range Minimum pressure and maximum pressure (drag indicator) Pressure and sensor temperature can be displayed simultaneously Settings via the operating keys Zero point correction Start and end o

Features Medium temperature: - 40... +200 °C (SIP and CIP compatible) Possibility of local operation (keyboard/LCD) or operation through comfortable, digital communication (HART protocol) LCD signals if the measuring range is exceeded or fallen below, measured value exceedance, probe defect Fully welded measuring system Accessories: seal, valves, setup program Measuring ranges: 100 mbar... 600 bar For relative pressure, absolute pressure and filling level of non-aggressive and aggressive gas, vapors and liquids High linearity: ≤ 0.1 % from standard value High long-term stability: <0.1 % per year Excellent temperature compensation Optional with ATEX approval Representation through display   Pressure in 13 different units; measured value in % or scaled with a freely selectable dimensional unit Output current in mA Sensor temperature in °C or °F Measured value error, measured value outside of measuring range Minimum pressure and maximum pressure (fly back) Pressure and sensor temperature can be displayed simultaneously Settings via the operating keys Zero point correction Start and end of the measuring process without

Features HART® interface Optional explosion protection Ex ia according to ATEX, INMETRO, GOST-R Linearity: 0.05 % Turn down: 1:50 Simple operation with rotary knob Stainless steel case Optional high-temperature version for up to 200 Â°C (SIP and CIP compatible) EHEDG certified with JUMO PEKA process connection, type 409711 (hygienic design) Setup program LCD display with bar graph Display scaling with a choice of measuring units Display of sensor temperature Display of minimum and maximum pressures Current generator function Customer benefits Process reliability Parts in contact with the medium are made of stainless steel (alternatively with NiMo alloy, or with a Monel, titanium or PTFE coating when used with a pressure separator). Combined with the front flush system, this offers optimum resistance to even aggressive media. The measuring instrument has a high degree of precision with deviation from characteristic line of 0.05 %, and offers excellent long-term stability of < 0.1 % per year. The version with explosion protection "Ex ia (intrinsically safe)" allows the pressure transmitter to be installed up to z

Features HART® interface Optional explosion protection Ex ia according to ATEX, INMETRO, GOST-R Linearity: 0.07 % Turn down: 1:200 Simple operation with rotary knob Characteristic line and display also adjustable for flow measurement Stainless steel case Setup program LCD display with bar graph Display scaling with a choice of measuring units Display of sensor temperature Display of minimum and maximum pressures Current generator function Customer benefits Process reliability Parts exposed to the medium are made of stainless steel (alternatively with NiMo alloy, or with a Monel, titanium or PTFE coating when used with a pressure separator). This offers optimum resistance, even with aggressive media. The measuring instrument has a high degree of precision with deviation from characteristic line of 0.05 %, and offers excellent long-term stability of < 0.1 % per year. The version with explosion protection "Ex ia (intrinsically safe)" allows the pressure transmitter to be installed up to zone 0.    Simple and time-saving The measuring instrument can be adjusted reliably and easily with a rotary knob on th

Features HART® interface Ex d explosion protection according to ATEX, INMETRO, GOST-R Linearity: 0.07 % Turn down: 1:200 Simple operation with rotary knob Characteristic line and display also adjustable for flow measurement Stainless steel case Setup program LCD display with bar graph Display scaling with a choice of measuring units Display of sensor temperature Display of minimum and maximum pressures Current generator function Customer benefits Process reliability Parts exposed to the medium are made of stainless steel (alternatively with NiMo alloy, or with a Monel, titanium or PTFE coating when used with a pressure separator). This offers optimum resistance, even with aggressive media. The measuring instrument has a high degree of precision with deviation from characteristic line of 0.05 %, and offers excellent long-term stability of < 0.1 % per year. The version with explosion protection "Ex d (flameproof enclosure)" allows installation of the connection for zone 0 and the entire pressure transmitter in zone 1. Simple and time-saving The measuring instrument can be adjusted reliably and easily with a ro

Features HART® interface Ex d explosion protection according to ATEX, INMETRO, GOST-R Linearity: 0.05 % Turn down: 1:50 Simple operation with rotary knob EHEDG certified with JUMO PEKA process connection, type 409711 (hygienic design) Setup program LCD display with bar graph Display scaling with a choice of measuring units Display of sensor temperature Display of minimum and maximum pressures Current generator function Customer benefits Process reliability Parts in contact with the medium are made of stainless steel (alternatively with NiMo alloy, or with a Monel, titanium or PTFE coating when used with a pressure separator). Combined with the front flush system, this offers optimum resistance to even aggressive media. The measuring instrument has a high degree of precision with deviation from characteristic line of 0.05 %, and offers excellent long-term stability of < 0.1 % per year. The version with explosion protection "Ex d (flameproof enclosure)" allows installation of the connection for zone 0 and the entire pressure transmitter in zone 1. Simple and time-saving The measuring instrument can be adjusted reliab

Features Measuring range: 0 - 250 mbar to 0 - 600 bar relative pressure, 0 - 600 mbar to 0 - 25 bar absolute pressure Temperature of medium: -30 to +120 °C For fluids and gas All commercially available process connections, including hygienic Fully welded stainless steel measuring system, without seals Optional with increased linearity ≤ 0.2 % from end value Protection type: IP65/IP67 Customer benefits Process reliability The fully-welded measuring system does not require seals and guarantees maximum process safety as well as reliability. Its core is a piezoresistive measuring cell, featuring high overload resistance and longevity. It is safe, reliable, and temperature resistant. Versatile A broad spectrum of measuring ranges and electrical outputs as well as a large number of process connections guarantee variant diversity that can be specifically adapted to any application. Versions are available in a cast option and/or with reduced deviation from the characteristic line (≤ 0.2 % from end value). Protection types up to IP67 can be implemented with connecting cable or round plug if desired. Applications Industry Food and

Features Exclusively for dry, non-corrosive, and non-ionizing gaseous media Measuring ranges: 0 to 40 mbar up to 0 to 600 mbar relative pressure Protection type: IP65/IP67 Customer benefits Process reliability The transmitter is based around a piezoresistive measuring cell, which is safe and reliable with high overload resistance and long-term stability. This guarantees maximum process reliability thanks to its sensitive pressure recording of dry, non-corrosive, and non-ionizing gases. Versatile A broad spectrum of measuring ranges and electrical outputs as well as a large number of process connections that are not flush mounted guarantee variant diversity that can be specifically adjusted to any application with an appropriate specification. Applications Laboratory technology Clean room technology Compressed air control The JUMO dTRANS p32 pressure transmitter with piezoresistive measuring cell is used to record relative pressures in dry, non-corrosive, and non-ionizing gaseous media. The nominal measuring ranges span from 0 to 40 mbar, to a maximum of 0 to 600 mbar as 2-wire or 3-wire versions. This sensitive pres