Thomson Linear Actuators Electrak 10 Actuators D24-05B5-xx
| GENERAL | |
| Product Family: | Electrak 10 Actuator |
| Brand: | Thomson |
| Available in: | North America, Europe, Asia |
 |
|
| PERFORMANCE | |
| Actuator Voltage: | 24 VDC |
| Max Dynamic Load N (lbs): | 2225 (500) |
| Max Static Load N (lbs): | 13344 (3000) NA units 18000 (4050) EU units |
| No Load Speed mm/sec (in/sec): | 61 (2.4) |
| Max Load Speed mm/sec (in/sec): | 37 (1.4) |
| Std Stroke Lengths mm (in): | 100(4), 152(6), 200(8), 255(10), 300(12), 355(14), 406(16), 460(18), 508(20), 610(24) Custom lengths available |
| Duty Cycle @ Max Load: | 0.25 |
| Rated@Ambient Temp °C (°F): | 25 (77) |
|
|
| MECHANICAL | |
| Screw Type: | Ball |
| Screw Lead mm (in): | 5.08 (0.2) |
| Gear Ratio: | 5:1 |
| Feedback Options: | Limit Switches (NA units only) Potentiometer Manual Override |
| End Play mm (in): | 1.02 (.04) |
| Mounting: | Clevis (0-150° rotation optional - EU only) |
| Restraining Torque Nm (#-in): | 12 (100) |
| Weight kg (lbs): | < 5.6 (12.7) NA units < 6.8 (15) EU units |
| Brake (Holding): | Integral Wrap-Spring |
| Brake (Dynamic): | No |
| Brake (Anti Coast): | No |
| Manual Override: | Yes, optional |
| Mid Stroke Protection: | Overload Clutch (Ball Detent) |
| End of Stroke Protection: | Overload Clutch (Ball Detent) |
| Motor Overload Protection: | Thermal switch (auto reset) |
|
|
| ENVIRONMENT | |
| IP Rating: | IP 65 |
| Temperature Range°C (°F): | -25 to 65 (-15 to 150) |
|
|
| CONNECTION | |
| Cable Length mm (in): | 190 (7.5) NA models 165 (6.5) EU models |
| Connectors: | NA models only Flying leads or Packard Electric 56 Series Male: 2984883 w/terminal 2962987 Female: 2973781 w/terminal 2962573 EU models only Flying leads or AMP connector w/housing: 180908-5 w/o housing: 42098-2 |
| Wire Size mm2 (AWG): | 2 (14) |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
