MODEL SVEVA

SINGLE SOLENOID

MODEL SVEVA

These models incorporate a 4-way Single Solenoid Double Bleed
Pilot Valve. A momentary (NOT continuous) electrical contact is re-
quired to move the rod its full stroke. A Bleeder Valve, such as the
Allenair BV100 or BV-1/8 (to be ordered separately), must be con-
nected to the spool cap opposite the solenoid.
Depressing this Bleeder Valve momentarily will return the rod to its
original position.

Models can be supplied with the rod normally retracted (electrical
contact will extend rod) or normally extended (electrical contact will
retract rod). The standard solenoid operator, as shown is the AAS
splice box housing.

Bore Sizes Available: 1-1/8”, 1-1/2”, 2”, 2-1/2”, 3”, 4” & *5”.
Voltages: 12, 24, 120 & 240/60 AC and 6, 12 & 24VDC
Are standard.
* 5” BORE AVAILABLE-Consult Factory for Details.

FOR DIMENSIONS AND MOUNTS SEE
PAGES PAGES 40 - 44.

AVAILABLE IN TYPES
“AV”, “CV”, “EV” & “EVT”

ROD NORMALLY RETRACTED MODEL SVEVAR
Energize solenoid to extend rod, manual bleed signal to retract rod.
OPTIONAL BLEEDER VALVE RETRACTS ROD

ROD NORMALLY EXTENDED MODEL SVEVAE
Energize solenoid to retract rod, manual bleed signal to extend rod.

OPTIONAL BLEEDER VALVE EXTENDS ROD

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue

MODEL SVEVA

SINGLE SOLENOID

FOR DIMENSIONS AND MOUNTS SEE PAGES PAGES 40 - 44.

AVAILABLE IN TYPES “AV”, “CV”, “EV” & “EVT”

Write a review

FOR DIMENSIONS AND MOUNTS SEE
PAGES PAGES 40 - 44.

AVAILABLE IN TYPES
“AV”, “CV”, “EV” & “EVT”