Taiyo Hydraulic Cylinder Direct Press DP Series Direct Press Cylinder

It could puncture round hole and square hole without any guide.
The external size is samll, so it could saving space for lined up installation.
It could setting the punch directly on the rod end.
The length of stroke is possible to puncture depth concave under face.

DPR 40-075, DPS 40-075

Product Lineup Click the icon as follows, to check the details. Action Style Bore (mm) Stroke(mm) 30 50 75 100 125 150 Basic DPR 26 40 50 With Non-rotating DPS 40 50

Specifications Action Style Basic With Non-rotating Model Numbers DPR DPS Aailable Bores(mm) 26,40,50 40,50 Cylinder Stroke 30/50/75/100/125/150mm 30/50/75/100/125/150mm Max. Allowable Pressure 14MPa Min. Working Pressure 0.6MPa Operating Temperature -10 to +80 Celsius Degree(But do not use when frozen) When using exceeds this temperature, the gaskets are damaged. Working Fluid Petroleum-based fluid Note1)Rot End Run-out less than 0.05mm less than 0.03mm Remarks Rotation Run-out/less than 0.03mm (The run-out of rod diameter when rotate without load.) Rotation Angle/less than 0.3 Degree (Without Torque) Adjustment Round Hole Square Hole/Different Diameter Hole Accessories One set screw for retainer-nut. One set screw for retainer-nut. /One Spring Pin Note1)One-side run-out of 1kgf horizontal load on the rod end.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: