actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Burkert valve Neutral gaseous media Type 6014 - Direct acting solenoid valve

3/2-way Solenoid Valve, direct-acting,
NC or NO
 Electrical connection cable plug, Form A
 With or without manual override as standard
 Threaded port and sub-base versions
 Impulse version optional

Technical data
Brass or stainless steel, polyamide (sub-base)
Body material
FKM (EPDM on request)
Seal material
Neutral gases and  uids (e.g. compressed air,
Medium
town gas, natural gas, water, hydraulic oil, petrol).  
Suitable for technical vacuum
-10! to +100!C (PA coil) to 120!C Epoxy c
Medium temperature
 Polyamide coil (FKM seal)
-10 to +55!
Ambient temperature
Max. 21 mm2/s
Viscosity
G 1/8, G 1/4, sub-base
Port connection
24 V DC, 24 V/50 Hz, 230 V/50 Hz
Operating voltage
(other voltages on request)
!10
Voltage tolerance
100% continuous rating
Duty cycle / single valve
Intermittent operation 60% (30 min) or
 Assembly
with 5 W coil (on request)
Electrical connection
DIN EN 175301-803 Form A for Cable Plug,Type
 According to
2508 (see Ordering chart  for accessories)
 
As required, preferably with actuator upright
Installation
IP65 with Cable Plug
Protection class
Polyamide class B (Epoxy class H on request)
Coil insulation class
Polyamide (Epoxy on request)
Coil material
DN 1.5- 2.5
Ori ce

Ordering chart for valves (other versions on request)
Valves with threaded port
Item no. per voltage / frequency
2)
1)
 ce [mm]
Circuit function  Ori Port connection Kv value water [m3/h]  Pressurerange [bar]  Effective coil power [W] 024/DC 024/50 230/50
Brass body
without manual override
1.5G 1/80.070 - 168125 329125 331125 332
C 3/2-way valve NC
2.0G 1/80.110 - 108125 333125 334125 336
G 1/40.110 - 108125 348126 138126 140
2.5 0.160 - 68125 341125 340125 342
G [mm]
1/8
G 1/40.160 - 68126 142126 143126 145
1.5G 1/80.070 - 168126 195126 196125 355
D 3/2 way valve, NO
2.0G 1/80.110 - 108125 357125 358125 360
G 1/40.110 - 108126 198126 199126 201
2.5G 1/80.160 - 68125 363126 202126 204
G 1/40.160 - 68126 205126 206126 208
1.5G 1/80.070 - 78126 150126 151126 153
T  3/2-way
Universal valve
with manual override
2.0G 1/80.110 - 108125 337125 338125 339
C 3/2-way valve NC
G 1/40.110 - 108125 349126 147126 149
2.0G 1/80.110 - 108126 209125 361126 211
D 3/2 way valve, NO
G 1/40.110 - 108126 212126 213126 215
Stainless steel body
1.5G 1/80.070 - 168126 216126 217126 219
C 3/2-way valve NC
2.0G 1/80.110 - 108126 220126 221126 223
2.0G 1/40.110 - 108126 224126 225126 227
1.5G 1/80.070 - 78126 228126 229126 231
T  3/2-way,
universal valve

Ordering chart for valves (other versions on request)
Valves with sub-base body without cable plug
2)
Item no. per voltage / frequency
1)
 ce [mm]
Circuit function  Ori Kv value water [m3/h]  Pressurerange [bar]  Effective coil power [W] 024/DC 024/50 230/50
Brass body
without manual override
1.50.070 - 168126 154126 155125 366
C 3/2-way valve NC
2.00.110 - 108125 367125 368125 370
2.00.110 - 108126 161126 162125 383
D 3/2 way valve, NO
with manual override
1.50.070 - 105 126 403126 404126 406
C 3/2-way valve NC
1.50.070 - 168126 157126 158126 160
2.00.110 - 65126 407126 408126 410
2.00.110 - 108125 371125 372125 374
Polyamide body material
without manual override
1.50.070 - 105126 390126 391126 393
C 3/2-way valve NC
with manual override
1.50.070 - 105126 396126 397126 399
C 3/2-way valve NC

Ordering chart for  valves, impulse version (other versions on request)
All valves with AC10-coil (32 mm), impulse Version, seal material FKM, thermic insulation class H (epoxy coil
medium temperature -10! up to +120!C, without manual override and Cable Plu
Item no. per
voltage/frequency
[V/Hz]
1)
2)
 ce [mm]
Circuit function Port connection Ori Kv value water [m3/h]  Power consumption DC (hot/cold coil) [W]Pressure range [bar] 012/DC 024/DC
Brass body
C 3/2-way valve,
Threaded portG 1/81.50.070-167209 280209 284
output 2 exhausted
2.00.110-107209 281209 285
Sub-basesub-base1.50.070-167209 278209 282
2.00.110-107209 279209 283

Ordering chart for accessory
Cable plug Type 2508 according to DIN EN 175301-803 Form A
Fixing screw
Flat seal
Circuitry Voltage/Frequency Item no.
None (standard) 0 - 250 V AC/DC008 376
The delivery of a cable plug includes the  at
with LED12 - 24 V AC/DC008 360
seal and the  xing screw. For other cable plug
with LED and varistor12 - 24 V AC/DC008 367
versions acc. to DIN EN 175301-803 Form A
with LED and varistor200- 240V008 369
(previously DIN 43650), see separate data-
1)
with inverter
24V DCon request
sheet Type 2508. Click on the box
further versions see datasheet Type 2508
More info. and you will come to o
website for this product where you
1
 The inverter plug includes an electronic which is specially adapted for an electrical  control with 3 wires
can download the datasheet.
 Input 3 wire technology, common "-" polarity, two split "+" polarity.
 Output suitable for impulse model for Type 6013/6014    
Ordering chart for Manifolds
Accessory parts Features Item no.
Single manifold in aluminium 005 020
black anodized
Multiple manifold in aluminiumHole spacing A [mm]Total length B [mm]Hole spacing C [mm]
2 valves5765C005 02
3 valves9098C 005 28
4 valves123131C005 28
5 valves15616457005 035
6 valves18919757005 038
8 valves25526390005 386
10 valves32132990005 764
Covering platewith plugs and O-ring, for closing off unused valve positions005 630

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site