MAC 3 way solenoid valves small 35L Series

The MAC 35L Series is a direct solenoid operated 3-way poppet valve featuring our Bullet Valve™ technology (patents pending).  The Bullet Valve™ design is a unique hybrid technology that utilizes a "lifting" solenoid (denoted by the "L" in 35L) with an integrated armature/balanced poppet.  The solenoid configuration features fewer parts and fewer wear points than our standard 35 series solenoid.  Our lifting solenoid design is isolated from airline contaminants and our signature balanced design means consistent shifting forces and repeatable response times regardless of inlet pressure fluctuations.

Patented MACSOLENOID for fastest possible response times.
Bonded balanced poppet for high flow, precise repeatability, and consistent operation.
Balanced poppet permits versatility in function °(TM) may be used as 3-way or 2-way normally open or
normally closed and may be used for vacuum, divertor, or selector applications.
Extremely high cycle rate capability.
Use on lube or non-lube service.
Manual overrides as standard.
Various solenoid enclosures and plug-in connectors.
Optional surge suppression (M.O.V. or Diode) available.
Low wattage DC solenoids °(TM) down to 1.8 watts
Pattended MACSOLENOID
(TM) virtually burn-out proof on AC service

TECHNICALDATA
Fluid :Compressed air, vacuum, inert gases
Pressure range :Vacuum to 120 PSI
Lubrication :Not required, if used  select a medium aniline point lubricant (between 180°,F and 210°,
Filtration :40 P
Temperature range :0°,F to 120°,F (-18°,C to 50
Flow (at 6 bar, P=1bar) :1.8 W : 0.12 C , 5.4 to12.7 W : 0.16 Cv v
Coil :General purpose class A, continuous duty, encapsulated
Voltage range :-15% to +10% of nominal voltage
Protection :Consult factory
Power : Inrush : 10.9 VAHolding : 7.7 VA= 1.8 to 12.7 W
Response times :24 VDC (5.4 W)Energize : 6 msDe-energize : 2 ms

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: