Buschjost solenoid valve with differential pressure Norgren solenoid valve Series 82400/82410
2/2-way valves DN 8 to DN 50
For neutral gases and liquids
Indirectly solenoid actuated
Diaphragm valves
Internal threads G 1/4 to G 2 or 1/4 NPT to 2 NPT
Operating pressure 0.1 to 10 / 16 bar
Description (standard valve)
Solenoid valve for e. g. air, water
normally cl
Switching function: osed
determined
Flow direction:
Diff 0.1 bar requir
erential pressure: ed (0.3 bar for EPDM)
¨C10 !aC ... +90
Fluid temperature:
Ambient temper ¨C10 !aC ... +50
ature:
Mounting position: optional, pref
erably solenoid
vertical on top
Material
Body: Brass (CW617N)
Seat seal: NBR
Internal parts: Stainless steel, PVDF
For contaminated fluids insertion of a strainer is recommended.
Features High flow rateDamped operationFunctional compact designSolenoid interchangeable without tools (c)
Characteristic Data
Valves
Part Number Nominal Connection SizeValve Length Operating Pressure * kv-value **
Weight Total
3
with 1 or 2 Diameter (mm) (mm) min. (bar) max. (bar) (Base m
/h) (kg)
8240000.9101 G 1/4
8 60 0.1 16 1.9 0.47
8241000.9101 1/4 NPT
8240100.9101 G 3/8
10 60 0.1 16 3.0 0.45
8241100.9101 3/8 NPT
8240200.9101 G 1/2
12 67 0.1 16 3.8 0.50
8241200.9101 1/2 NPT
8240300.9101 G 3/4
20 80 0.1 16 6.1 0.65
3/4 NPT
8241300.9101
8240400.9101 G 1
25 95 0.1 16 9.5 0.95
8241400.9101 1 NPT
8240500.9101 G 1 1/4
32 132 0.1 10 (16***)23.0 2.73
8241500.9101 1 1/4 NPT
8240600.9101 G 1 1/2
40 132 0.1 10 (16***)25.0 2.53
8241600.9101 1 1/2 NPT
8240700.9101 G 2
50 160 0.1 10 (16***)41.0 3.85
8241700.9101 2 NPT
2
St
/s (cSt) ate voltage [V] and frequency [Hz]
* for gases and liquid fluids up to 25 mm
** C -value (US) !O -value x 1.2
v v
with solenoid 9151
***
Solenoid 9101 / 9151 Further Options (Valves)
Standard voltages
XXXXX01.XXXX Normally open (NO),
DC 1 AC 2 AC 2
from G 1 1/4 with solenoid 9151,
50 Hz 60 Hz
0.1 up to 16 bar
24 V 24 V ¨
XXXXX02.XXXX Manual override
¨ 110 V 120 V
XXXXX03.XXXX Seat seal FPM,
¨ 230 V 220 V
max. fluid temperature
¨C5 !aC ... +110
Design acc. to DIN VDE 0580
Voltage range !à10
XXXXX14.XXXX Seat seal EPDM, for hot water,
100 % duty cycle
max. fluid temperature +110 !aC,
Protection class acc. to EN 60529 IP65
Socket Form A acc. to DIN EN 175301-803 (included)
0.3 ... 16 bar up to DN 25
0.3 ... 10 bar from DN 32
Power Consumption
XXXXX50.XXXX tem,
Latching sys
According to DIN VDE 0580 at coil temperature
impulse time min. 30 ms,
of +20 !aC. In operation the power consumption of
only for DC 6 V, 12 V and 24 V
the solenoid decreases by approx. 30 %.
On request Further versions
AC 2
SolenoidDC 1
InrushHolding
Further Options (Solenoids)
9101 * 8 W15 VA12 VA / 7 W
XXXXXXX.9136 Solenoid in protection class
9151 * 18 W45 VA35 VA / 17 W
Part Number Nominal Connection ? A B H H1 L L1 T
with 1 or 2 Diameter (mm) Size (mm) (mm) (mm) (mm) (mm) (mm) (mm)
8240000.9101 G 1/4 12.0
8 4419.5 78.567.0 6027.5
8241000.9101 1/4 NPT 10.0
8240100.9101 G 3/8 12.0
10 4419.5 78.567.0 6027.5
8241100.9101 3/8 NPT 10.5
G 1/2 14.0
8240200.9101
12 4419.5 81.067.0 6731.0
1/2 NPT 13.5
8241200.9101
8240300.9101 G 3/4 16.0
20 5024.0 88.071.5 8036.5
3/4 NPT 14.0
8241300.9101
8240400.9101 G 1 18.0
25 6229.5 97.577.0 9544.0
8241400.9101 1 NPT 17.0
8240500.9101 G 1 1/4 20.0
32 9244.5124.595.513260.0
8241500.9101 1 1/4 NPT 17.0
8240600.9101 G 1 1/2 22.0
40 9244.5124.595.513260.0
8241600.9101 1 1/2 NPT 17.0
8240700.9101 G 2 24.0
50 10954.5142.5108.016074.0
8241700.9101 2 NPT 17.5
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
