Buschjost Pressure actuated valves by external fluid Norgren solenoid valve Series 84660 84670 84680 84690
3/2-way valves DN 1.6 and DN 3.0
Pilot valve for pressure actuated valve by external fluid
Indirectly solenoid actuated
Seat valves
Connection P female thread G 1/4; Connection A male thread G 1/4
Operating pressure 1 to 10 bar
Description (standard valve)
Solenoid valve for filtered, lubricated resp. non-lubricated air or neutral liquid fluids
Switching function: normally closed
Flow direction: determined
Fluid temperature: ¨C10 !aC to max. +60
Ambient temperature: ¨C10 !aC to max. +60
Monting position: optional, preferably solenoid
vertical on top
Material
Body: Aluminium
Seat seal: TPU
Internal parts: Stainless steel, PPS
FeaturesCompact designComplete with connector and gasketInterchangeable solenoid systemNoiseless exhaustLow power consumption
Characteristic data
Valves
Part Number Nominal
Connection size Operating pressure Switching time ** (ms) Flow *** Weight
Solenoid with 1 Diameter
Internal External min. max. (bar) On Off (Basis l/min) (kg)
or 2 (mm)
P R A
8466000.9101 G 1/4 * G 1/4
1.6 1 10 8.5 30.4 1.2 0.47
8467000.9101 1/4 NPT * 1/4 NPT
8468000.9151 G 1/4 * G 1/4
3.0 1 10 15.0 81.9 3.3 0.45
8469000.9151 1/4 NPT * 1/4 NPT
* Noiseless exhaust State voltage [V] and frequency [Hz]
** At 6 bar acc. to DIN VDI 3290 with DC solenoid
*** C -value (US) !O -value x 1.2
v v
Further Options (Valves)Solenoid 9101 / 9151
XXXXX02.XXXX Manual override
XXXXX53.XXXX connection P femal thread G 1/8
DC 1 AC 2
60 Hz
50 Hz
connection A male thread G 1/8
24 V 24 V ¨
¨ 110 V 120 V
Further Options (Solenoids for Series 84660)
¨ 230 V 220 V
XXXXXXX.9136 Solenoid in protection class
x II 2 GD EEx m II T4 T 130 !aC
Design acc. to DIN VDE 0580
with 3 m connection cable
Voltage range !à10
100 % duty cycle
Protection class acc. to EN 60529 IP65
Socket Form A acc. to DIN EN 175301-803 (included)
Further Options (Solenoids for Series 84680)
XXXXXXX.9191 Solenoid in protection class
Power Consumption
x II 2 GD EEx me ll T3 T 140 !aC
According to DIN VDE 0580 at coil temperature of +20 !aC. In
On request Further versions
operation the power consumption of the solenoid decreases
by approx. 30 %.
Solenoid
DC 1 AC 2
Inrush Holding
9101 * 8 W 15 VA 12 VA / 7 W
9151 * 18 W 45 VA 35 VA / 17 W
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: