Keller Swiss-Built Series 26W General purpose submersible level transmitter

The Series 26 W transmitter utilises the Series 10 piezoresistive capsule, which is housed inside
a submersible 316 L stainless steel body as standard.
For corrosive applications hastelloy diaphragms and other materials are available as options. 
26 W vented gauge versions have cable with integral vent tube. These transmitters are itted with
 durable PE cable.
   
Speciications
Pressure Ranges    (FS)  0,2  0,5  1  2  5  10  20  bar
Linearity   0,2 %FS typ.  0,5 %FS max.
Compensated Temp. Range  0!-50 !aC (on demand -10!-80
Storage-/Operating Temperature  -45!-100 !
Temperature Coeficients!  !-of Zero, in %FS/!  !-of Sensitivity, in %/!
Range  > 1 bar   0,005  .  0,01 max.  0,02 max.
Range  1 bar   0,010 typ.  0,02 max.  0,02 max.
Range  0,5 bar   0,015 typ.  0,03 max.  0,02 max.
Range  0,2 bar    0,025 typ.  0,05 max.  0,02 max.
Stability    
Range  > 2 bar   0,1 %FS typ.  0,2 %FS max.   
Range   2 bar   2 mbar typ.  4 mbar max.
Type    2-Wire  3-Wire    3-Wire
Excitation (U)   8!-28 VD  10!-28 VD   13!-28 VD
Signal Output   4!-20 mA  0!-20 m   0!-10
Load ()   < (U-8 V)/0,02 A  < (U-7 V)/0,02 A   > 5 k
Cable     7,3 mm, PE, integrated reference tube
Cable Length   Standard: 5 meter
Material in Media Contact  Stainless Steel 316 L, Viton - or Silicone O-ring
Weight    Transmitter: 260 g   /   5 m cable: 340 g
Electromagnetic Compatibility  EN 61000-6-1 through -4
Options    - Other cable lengths
    - Transducer: Hastelloy-housing and diaphragm
    - Others versions and pressure ranges on request

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: