AMETEK pressure transmitter Model IND-100
|
Description
The Model IND-100 Pressure Transmitter has been designed for use in a variety of industrial applications such as plant process and utility pressure measurements, compressor control, and hydraulic and pneumatic manufacturing systems. The AMETEK IND-100 offers exceptional reliability in industrial as well as outdoor environments. It provides unequaled performance and is perfectly suited for the demanding price requirements of this market. EMI/RFI resistance is critical and is provided on the AMETEK IND-100 Transmitter as protection against noise-generating variable speed motors and radio equipment that is common on the factory fl oor. In addition, all AMETEK transmitters are thermally compensated over a wide temperature range to handle outdoor environments. AMETEK utilizes the most stable sensor available for IND-100 transmitters, sputtered METAL THIN FILM technology. The wetted surfaces are 316L, and Hastelloy. The circuits are isolated from external interference with RFI/EMI fi lters and a power limiting circuit which has been agency approved to meet Class I, Div. 1 intrinsic safety standards. IND-100 transmitters with pigtail connectors are also NEMA 4x rated to meet the needs of outdoor installations. AMETEK will supply the product through its global distribution partner network so each application will receive personal support throughout the life of the product. |
Specifications
| Functional Specifications | |
| Service | Liquid, gas or vapor |
| Range Limits | 100 psig, 250 psig, 1000 psig, 2000 psig, 3000 psig; alternate ranges, including bar also available (consult factory) |
| Output | 4-20 mA, 2-wire, current limited, 0-5 VDC |
| Power Supply | 12-30 VDC with reverse polarity protection |
| Loop Resistance | 0 ohms at 12 VDC; 900 ohms at 30 VDC (mA only |
| Output Loading | 75 kohm (VDC output only |
| Span/Zero Adjustment | ±5% of FS |
| Temperature Limits | Compensated: 0° to 50°C Operating: -25° to 85°C Storage: -40° to 85°C |
| Humidity | 0-95% RH, pigtail model* |
| Overrange | 150% FS |
| Burst Pressure | 400% FS |
| Hazardous Locations | Intrinsic safety (with barrier): Class I, Div. 1 Non-incendive: Class I, Div. 2 |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
