actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories

Huba Differential pressure transmitter 652

Type 652 pressure transmitters are ideally suited to the continuous monitoring of liquid and gas flow (or level) in heating, ventilation and process technology. Their especially rugged construction allows a
single port over-pressure of up to 20 bar, depending upon pressure range.

 High overpressure safety margin 10/20 
 bar on P1 3 standardised output signals for direct
 Processing in control / monitoring systems Functionally simple, rugged mechanics 
 with high operating reliability Also for slightly aggressive liquids and 
 gases Attractive price / performance ratio

Technical overview
Pressure range
Relative and differential    0 ... 50  1000 mbar
Operating conditions
Medium     Liquids and neutral gases
    NBR-based    0 ... +80 ¨¤
    FPM -10 ... +80 ¨¤
 
    EPDM  -10 ... +80 ¨¤
Temperature
    Q (Silicone)  -40 ... +80 ¨¤
    Storage -40 ... +80 ¨¤
   < 200 mbar 10 bar
Tolerable overload (P1 > P2)
    > 500 mbar 20 bar
Rupture pressure    30 bar
Materials in contact with the medium
     NBR-based
     EPDM
Diaphragm
     FPM
     Silicon
     Anodized aluminium
Case     Brass
     Brass chemical nickel-plated
     X14CrMoS17  1.4104
     X5CrNi18-10  1.4301
Other components     X10CrNi18-8  1.4310
     Steel category A2 for screws
     Polyacetate-C, Polyamide
Electrical overview
    0 ... 10 V
Output (3 wire)     0 ... 20 mA
     4 ... 20 mA
Power supply     20 ... 30 VDC / 24 VAC +15% / -10%
    Current load < 300 Ohm
Load
    Voltage load > 10 kOhm  
   0 ... 10 V 35 mA
Current consumption    0 ... 20 mA max. 55 mA
    4 ... 20 mA max. 55 mA
Polarity reversal protection   Short circuit proof and with polarity reversal protection
Dynamic response
Response time     < 10 ms
Load cycle     < 10 Hz
Protection standard    
With plastic cover (PG9)    IP 65
Electrical connection
Screw terminals  
Pressure connection (P1 > P2)
Inside thread      G  
Straight screwed connection  Zinc plated steel with NBR seal for pipe (!à 6 mm) G
Screwed Socket  CuZn nickel plated for tube(!à 6 mm) G
Installation arrangement
1)
Unrestricted. The transmitter is calibrated in the factory with the diaphragm positoned vertically. In the case of liquid media vent screw up, i.e. pressure connection down
Tests / Admissions
Electromagnetic compatibility    CE conformity acc. EN 61326-2-3
Weight
With aluminium pressure case    ~   394 g
With brass pressure case    ~ 1030 g
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site